
2. Suggest placing condensate pump under air conditioner
condensate drain hose and within 15 cm space in between.
Check the size and space before use a tool to drill two holes
on the wall and place the condensate pump.
3. Insert the plastic screws heads to the holes, and use a
screwdriver to fix the hanger board with the screws from the
package.
(Securely fix the hanger in order to keep condensate pump
in an even horizontal level).
4. Up and down hook up condensate pump’s back support hole to
hanger board and keep it in horizontal level.
Attention: Hanger board must be place correctly to condensate
pump’s back support hole and horizontal level.
5. To avoid clog or malfunction, do not tie too tight on the belt or
strip when fixed condensate drains hose and tubes on the wall. To
have Siphon reaction outlet discharging tube must be lower than
condensate pump 30 cm.
6. Connect condensate pump power cord and pour water into
condensate pump water intake for testing. After making sure the
pump is running functionally, place air conditioner’s condensate
drain hose to condensate pump water intake to finish the
installation.
www.ekt2.com
Electronics Katrangi Trading