EL-CELL PAT-Stand-1 U User manual

© 2017 EL-CELL GmbH
User Manual
Release 1.0
PAT-Stand-1 U
Docking station for PAT-Cell-TwinRef

Page 2 of 7
User Manual PAT-Stand-1 U
Release 1.0
The information in this manual has been carefully checked and believed to be accurate;
however, no responsibility is assumed for inaccuracies.
EL-CELL GmbH maintains the right to make changes without further notice to products
described in this manual to improve reliability, function, or design. EL-CELL GmbH does not
assume any liability arising from the use or application of this product.
EL-CELL GmbH
Tempowerkring 8
21079 Hamburg - Germany
phone: [phone]
fax: [phone]
e-mail: [e-mail]
web: www.el-cell.com

Page 3 of 7
User Manual PAT-Stand-1 U
Release 1.0
Content
1 Product description ...................................................................................................................................... 4
2 Installation....................................................................................................................................................... 4
3 Cleaning ........................................................................................................................................................... 4
4 Signals .............................................................................................................................................................. 5
5 Unpacking........................................................................................................................................................ 6
6 Technical data ................................................................................................................................................ 6
7 Spare parts ...................................................................................................................................................... 6
8 Technical support .......................................................................................................................................... 7
9 Warranty .......................................................................................................................................................... 7

Page 4 of 7
User Manual PAT-Stand-1 U
Release 1.0
1 Product description
The PAT-Stand-1 U is a single channel docking station for use with a PAT-Cell-TwinRef.
Features
Docking station for use with a single PAT-Cell-TwinRef.
May be used to connect with any other PAT series test cell. All signals of the respective
test cell are available through banana sockets at the front panel.
Compatible with any potentiostat or battery tester.
2Installation
Place the PAT-Stand-1 U on a flat, dry and clean surface, for example on a bench top, inside a
temperature chamber or a glove box. Then connect the cell cable of your potentiostat or battery
tester channel to the banana sockets at the front of the PAT-Stand-1 U.
3Cleaning
Wipe the PAT-Stand-1 U with a moist tissue. Do not use aggressive chemicals for cleaning.
PAT-Stand-1 U
PAT-Cell-TwinRef

Page 5 of 7
User Manual PAT-Stand-1 U
Release 1.0
4 Signals
Different signals are available at the banana sockets located at the front of the PAT-Stand-1 U
depending on which type of PAT-Cell is attached to the stand.
PAT-Cell-TwinRef
PAT-Cell
PAT-Cell-Aqu
PAT-Cell-Press
PAT-Cell-Press-Aqu
A
1
1
1
B
R2
Not used
SUP (I2C)
C
Not used
Not used
SDA (I2C)
D
Not used
Not used
SCL (I2C)
E
2
2
2
F
R
R
R
G
Not used
B2
AOUT (Pressure)
H
2S
2S
2S
J
Not used
B1
GND
K
1S
1S
1S
1/1S: PAT-Core lower electrode power/sense
2/2S: PAT-Core upper electrode power/sense
R: PAT-Core reed contact (reference), PAT-Core-TwinRef primary reed contact (1st reference)
R2: PAT-Core-TwinRef secondary reed contact (2nd reference)
AOUT: sensor analog signal
SUP: +5V supply for sensor and I2C
SDA, SCL: I2C signals
GND: Signal ground for SUP, AUT, SCL, SDA
B1, B2: used for cell detection in PAT-Stand-16 and PAT-Chamber-16

Page 6 of 7
User Manual PAT-Stand-1 U
Release 1.0
5Unpacking
Check the contents of the packages against the list given below to verify that you have
received all of the required components. Contact EL-CELL, if anything is missing or damaged.
NOTE: Damaged shipments must remain within the original packaging for freight company
inspection.
List of Components
PAT-Stand-1 U ECE1-00-0010-C
11 x adapter male 4 mm to female 2 mm ELT9081
6Technical data
Operating temperature: -20 to +70°C
Humidity: non condensing
Dimensions: 105 mm (width) x 113 mm (depth) x 80/110 mm (height without/ with PAT-Cell)
Weight: 0.56/0.96 kg (without/with PAT-Cell)
Protection Class: IP20 according to EN 60529
7Spare parts
Adapter male 4 mm to female 2 mm ELT9081

Page 7 of 7
User Manual PAT-Stand-1 U
Release 1.0
8Technical support
Technical support for this product is exclusively provided by EL-CELL GmbH.
EL-CELL GmbH
Tempowerkring 8
21079 Hamburg - Germany
phone: [phone]
fax: [phone]
e-mail: [e-mail]
web: www.el-cell.com
9Warranty
For a period of one year from the date of shipment, EL-CELL GmbH (hereinafter Seller)
warrants the goods to be free from defect in material and workmanship to the original
purchaser. During the warranty period, Seller agrees to repair or replace defective and/or
nonconforming goods or parts without charge for material or labor, or, at the Seller’s option,
demand return of the goods and tender repayment of the price. Buyer’s exclusive remedy is
repair or replacement of defective and nonconforming goods, or, at Seller’s option, the
repayment of the price.
Seller excludes and disclaims any liability for lost profits, personal injury, interruption of
service, or for consequential incidental or special damages arising out of, resulting from, or
relating in any manner to these goods.
This Limited Warranty does not cover defects, damage, or nonconformity resulting from
abuse, misuse, neglect, lack of reasonable care, modification, or the attachment of improper
devices to the goods. This Limited Warranty does not cover expendable items. This warranty is
void when repairs are performed by a non-authorized person or service center. At Seller’s
option, repairs or replacements will be made on site or at the factory. If repairs or
replacements are to be made at the factory, Buyer shall return the goods prepaid and bear all
the risks of loss until delivered to the factory. If Seller returns the goods, they will be delivered
prepaid and Seller will bear all risks of loss until delivery to Buyer. Buyer and Seller agree that
this Limited Warranty shall be governed by and construed in accordance with the laws of
Germany.
The warranties contained in this agreement are in lieu of all other warranties expressed or
implied, including the warranties of merchantability and fitness for a particular purpose.
This Limited Warranty supersedes all prior proposals or representations oral or written and
constitutes the entire understanding regarding the warranties made by Seller to Buyer. This
Limited Warranty may not be expanded or modified except in writing signed by the parties
hereto.