Elation FUZE PENDANT User manual

FUZE PENDANT™
user manual

2
©2020 ELATION PROFESSIONAL all rights reserved. Information, specifications, diagrams, images,
and instructions herein are subject to change without notice. ELATION PROFESSIONAL logo and
identifying product names and numbers herein are trademarks of ELATION PROFESSIONAL.
Copyright protection claimed includes all forms and matters of copyrightable materials and
information now allowed by statutory or judicial law or hereinafter granted. Product names used in
this document may be trademarks or registered trademarks of their respective companies and are
hereby acknowledged. All non-ELATION brands and product names are trademarks or registered
trademarks of their respective companies.
ELATION PROFESSIONAL and all affiliated companies hereby disclaim any and all liabilities for
property, equipment, building, and electrical damages, injuries to any persons, and direct or indirect
economic loss associated with the use or reliance of any information contained within this document,
and/or as a result of the improper, unsafe, insufficient and negligent assembly, installation, rigging, and
operation of this product.
Elation Professional USA | 6122 S. Eastern Ave. | Los Angeles, CA. 90040
323-582-3322 |323-832-9142 fax | www.elationlighting.com |[email protected]
Elation Professional B.V. | Junostraat 2 | 6468 EW Kerkrade, The Netherlands
[phone] |[phone] fax |www.elationlighting.eu |[email protected]
Elation Professional Mexico | AV Santa Ana 30 | Parque Industrial Lerma, Lerma, Mexico 52000
[phone]
DOCUMENT VERSION
Due to additional product enhancements, an updated version of this
document may be available online. Please scan the QR Code with
your mobile device or visit www.elationlighting.com for the latest
revision/update of this manual before installation and/or
programming.
Date
Document
Version
Software
Version ≥
DMX
Channel Modes
Notes
01/16/20
1.0
1.01H
Dimmer1CH, Dimmer Color 4CH, RGBWL
5CH, RGBWL 16bit 10CH, Standard 10CH,
Extended 17CH, HSI 4CH, HSI Extended 9CH
Preliminary release.
02/25/20
1.1
1.2
NO CHANGE
Updated overview and system
menu.
04/06/20
1.2
NC
NO CHANGE
Updated Optional Accessories.

3
CONTENTS
General Information
4
Warranty Returns (USA Only)
5
Safety Guidelines
6
Maintenance Guidelines
8
Overview
9
Optional Accessory Installation Guidelines
11
Fixture Installation Guidelines
14
E-FLY Wireless Set Up Guidelines
16
System Menu
17
Dimmer Modes
22
DMX Channel Functions
23
Color Temperature Table
34
Virtual Gel Swatch Book Table
35
Error Codes
36
Specifications
37
Dimensional Drawings
38
Optional Accessories | FCC Statement
43

4
GENERAL INFORMATION
INTRODUCTION
Please read and understand the instructions in this manual carefully and thoroughly before attempting
to operate this fixture. These instructions contain important safety and use information.
UNPACKING
Every fixture has been thoroughly tested and has been shipped in perfect operating condition.
Carefully check the shipping carton for damage that may have occurred during shipping. If the carton
is damaged, carefully inspect the fixture for damage, and be sure all accessories necessary to install
and operate the fixture have arrived intact. In the event damage has been found or parts are missing,
please contact our customer support team for further instructions. Please do not return this fixture to
your dealer without first contacting customer support. Please do not discard the shipping carton in
the trash. Please recycle whenever possible.
BOX CONTENTS
45°Lens
Pendant Bracket Kit
Locking IP65 Power Cable
CUSTOMER SUPPORT
Contact ELATION Service for any product related service and support needs.
Also visit forums.elationlighting.com with questions, comments or suggestions.
ELATION SERVICE USA - Monday - Friday 8:00am to 4:30pm PST
323-582-3322 | Fax [phone] | [email protected]
ELATION SERVICE EUROPE - Monday - Friday 08:30 to 17:00 CET
[phone] | Fax [phone] | [email protected]
REPLACEMENT PARTS please visit parts.elationlighting.com
IMPORTANT NOTICE!
THERE ARE NO USER SERVICEABLE PARTS INSIDE THIS UNIT.
DO NOT ATTEMPT ANY REPAIRS YOURSELF; DOING SO WILL VOID YOUR
MANUFACTURER’S WARRANTY. DAMAGES RESULTING FROM MODIFICATIONS
TO THIS FIXTURE AND/OR THE DISREGARD OF SAFETY INSTRUCTIONS AND
GUIDELINES IN THIS MANUAL VOID THE MANUFACTURER’S WARRANTY AND
ARE NOT SUBJECT TO ANY WARRANTY CLAIMS AND/OR REPAIRS.

5
WARRANTY RETURNS (USA ONLY)
To obtain warranty service, a Retur n M a t e r i a l s A u t h o r i z a t i o n ( R M A ) n u m b e r m u s t f i r s t b e o b t a i n e d f rom
ELATION. It is the Customer’s responsibility to provide product proof of purchase and serial number by
acceptable evidence such as an invoice copy or an approved ELATION Extended Warranty Certificate
(“EWC”) and any relevant maintenance records at the time warranty service is sought. Failure to provide
acceptable evidence of product proof of purchase or EWC and any relevant maintenance records may be
cause for denial of warranty service.
Products returned for warranty service must be sent without any accessories (i.e., power, data, and safety
cables, brackets, clamps, rigging hardware, frost filters, gel frames, barn doors, lens, hoses, nozzles, rack
mounting hardware, etc.), must be boxed using the original and/or suitable packaging materials (double-
box and foam) that provides ample product protection for ground and/or air freight transit, and must be
shipped freight pre-paid and insured to ELATION in Los Angeles, CA or an ELATION Authorized Service
Center. The RMA number must be clearly written on the outside of the return box, and a brief description
of the problem and the RMA number must be documented and included in the box.
Products returned for warranty service without an RMA number clearly marked on the outside of the
package will be refused and returned to the shipper at the Customer’s expense. Products returned for
warranty service, which are received damaged due to inadequate and/or improper packaging and/or due
to damage caused by shipping carrier, may incur additional repair charges before warranty service begins
and/or may void this warranty. If any product accessories (included and/or optional) are shipped with the
product, ELATION and/or the ELATION Authorized Service Center shall have no liability what so ever for
the loss and/or damage to any such accessories, nor the safe return thereof. If the requested warranty
repairs or service (including parts replacement) are within the terms of this warranty, ELATION will pay
return ground transportation shipping charges to a single designated point within the United States.

6
SAFETY GUIDELINES
This fixture is a sophisticated piece of electronic equipment. To guarantee a smooth operation, it is
important to follow all instructions and guidelines in this manual. Elation Professional is not
responsible for injury and/or damages resulting from the misuse of this fixture due to the disregard
of the information printed in this manual. Only qualified and/or certified personnel should perform
installation of this fixture and only the original rigging and mounting hardware included with this
fixture or available optional accessories should be used for installation. Any modifications to the
fixture and/or the included and optional rigging and mounting hardware will void the original
manufacturer’s warranty and increase the risk of damage and/or personal injury.
M
PROTECTION CLASS 1 - FIXTURE MUST BE PROPERLY GROUNDED
THERE ARE NO USER SERVICEABLE PARTS INSIDE THIS UNIT.
DO NOT ATTEMPT ANY REPAIRS YOURSELF; DOING SO WILL VOID
YOUR MANUFACTURER’S WARRANTY. DAMAGES RESULTING FROM
MODIFICATIONS TO THIS FIXTURE AND/OR THE DISREGARD OF
SAFETY INSTRUCTIONS AND GUIDELINES IN THIS MANUAL VOID THE
MANUFACTURER’S WARRANTY AND ARE NOT SUBJECT TO ANY
WARRANTY CLAIMS AND/OR REPAIRS.
DO NOT PLUG FIXTURE INTO A DIMMER PACK!
NEVER OPEN THIS FIXTURE WHILE IN USE!
UNPLUG POWER BEFORE SERVICING FIXTURE!
NEVER TOUCH FIXTURE DURING OPERATION, AS IT MAY BE HOT!
KEEP FLAMMABLE MATERIALS AWAY FROM FIXTURE!
NEVER LOOK DIRECTLY INTO THE LIGHT SOURCE!
RETINA INJURY RISK - MAY INDUCE BLINDNESS!
SENSITIVE PERSONS MAY SUFFER AN EPILEPTIC SHOCK!
INDOOR / DRY LOCATIONS USE ONLY!
DO NOT EXPOSE FIXTURE TO RAIN AND/OR MOISTURE!
MINIMUM DISTANCE TO OBJECTS/SURFACES
IS 1.0 FOOT (0.3 METER)
MINIMUM DISTANCE OF FLAMMABLE MATERIALS
FROM THE SURFACE IS 1.6 FEET (0.5 METER)
MAXIMUM AMBIENT OPERATING TEMPERATURE IS 113°F (45°C)

7
SAFETY GUIDELINES
DO NOT TOUCH the fixture housing during operation.
DO NOT shake fixture, and avoid brute force when installing and/or operating fixture.
DO NOT operate fixture if the power cord is frayed, crimped, damaged and/or if any of the power cord
connectors are damaged or do not fit into the fixture securely with ease.
NEVER force a power cord connector into the fixture. If the power cord or any of its connectors are
damaged, replace it immediately with a new one of similar power rating.
DO NOT block any air ventilation slots. All fan and air inlets must remain clean and never blocked.
Allow approx. 6” (15cm) between fixture and other devices or a wall for proper cooling.
TURN OFF the power and allow approximately 15 minutes for the fixture to cool down before serving.
ALWAYS disconnect fixture from power before performing any service and/or cleaning procedure.
ONLY handle power cord by the plug end, never pull plug out by tugging the wire portion of the cord.
During the initial operation of this fixture, a light smoke or smell may emit from the interior of the fixture.
This is a normal process and is caused by excess paint in the interior of the casing burning off from the
heat associated with the LED and will decrease gradually over time.
Consistent operational breaks will ensure fixture will function properly for many years.
ONLY use the original packaging and materials to transport the fixture for service.

8
MAINTENANCE GUIDELINES
DISCONNECT POWER BEFORE PERFORMING ANY MAINTENANCE!
CLEANING
Frequent cleaning is recommended to ensure proper function, optimized light output, and an
extended life. The frequency of cleaning depends on the environment in which the fixture operates:
damp, smoky or particularly dirty environments can cause greater accumulation of dirt on the
fixture’s optics. Clean periodically with a soft cloth to avoid dirt/debris accumulation.
NEVER use alcohol, solvents, or ammonia-based cleaners.
MAINTENANCE
Regular inspections are recommended to insure proper function and extended life.
There are no user serviceable parts inside this fixture, please refer all other service issues to an
authorized Elation service technician. Should you need any spare parts, please order genuine parts
from an authorized Elation dealer.
Please refer to the following points during routine inspections:
• A detailed electric check by an approved electrical engineer every three months, to make sure the
circuit contacts are in good condition and prevent overheating.
• Be sure all screws and fasteners are securely tightened at all times. Loose screws may fall out during
normal operation resulting in damage or injury as larger parts could fall.
• Check for any deformations on the housing, color lenses, rigging hardware and rigging points
(ceiling, suspension, trussing). Deformations in the housing could allow for dust to enter into the
fixture. Damaged rigging points or unsecured rigging could cause the fixture to fall and seriously
injure a person(s).
• Electric power supply cables must not show any damage, material fatigue or sediments.
• NEVER remove the ground prong from the power cable.

9
OVERVIEW
1. Locking Power Connector
2. DMX Input – 5-pin XLR Male
3. DMX Output – 5-pin XLR Female
4. Wired Power Input Cable Gland
5. Wired DMX Cable Gland
6. Power Input Switch
7. Emergency Power Input Terminal

10
OVERVIEW
POWER CONNECTIONS
Power may be provided to the fixture by means of an industry standard locking power connector (1).
Alternately, for more permanent installations, a power line may be wired to the fixture by connecting a
line to the wired power input cable gland (4). A wiring block is located directly behind this gland,
with wire terminals for Live (L), Neutral (N), and Floating Ground (FG). This terminal block is accessed
by removing the center plate in the connection panel.
Additionally, the fixture may be configured to draw power from either input by means of the power
input switch (6). The fixture will draw power from the locking power connector (1) when the switch
is set to the “EXT” position, or the wired power input cable gland (4) when the switch is set to the
“INT” position.
DMX CONNECTIONS
DMX communication to and from the fixture may be provided by the DMX 5-pin male XLR input (2)
and the DMX 5-pin female XLR output (3). Alternately, for more permanent installation, a DMX line
may be wired to the fixture by connecting the line to the wire DMX cable gland (5). A wiring block is
located directly behind this gland, with wire terminal for DMX +, DMX -, and DMX GND. This terminal
block is accessed by removing the center plate in the connection panel. The terminal block also
contains two additional terminals for 10V+ and 10V-, but these terminals are discussed in the following
section.
0-10V / CONTACT CLOSURE CONNECTION
The terminal block that is used for the hard-wired DMX connections also includes terminals for 10V+
and 10V-. These two terminals may be used to connect the fixture to a current sink 0-10V dimmer to
enable adjustment of lighting intensity, or they may be used to connect the fixture to a contact closure
such as a wall switch or an emergency alarm panel.
EMERGENCY POWER
The emergency power input terminal (7) can be connected to a 25-48V DC power source in order
to provide emergency lighting in the event of loss of AC power. The DC power source should be rated
for 15W or 20W in order to provide sufficient power for the fixture to operate for a minimum of 90
minutes. Please note that neither color nor light output will be adjustable when the fixture is operating
in this mode, as the fixture has been optimized for maximum runtime at the required light levels.
Please note that it is the responsibility of the user to determine the system design, wiring, and
illumination levels required by law for emergency lighting systems in the locality in which the
system will be operating. Emergency lighting must comply with all applicable national, state,
and local standards.