ElectrIQ eiQ-25FHDO165FSGUC User manual

USER MANUAL
FHD LED MONITOR
eiQ-25FHDO165FSGUC
Thank you for choosing electriQ
Please read the user manual before using this monitor and keep it safe for future reference
Visit www.electriQ.co.uk to view our entire range of Intelligent Electricals

1
CONTENTS
Safety Information 2
What’s Included 4
Monitor Dimensions 4
Connections Available on the Monitor 5
Wall Mounting 6
Getting Started 6
Monitor Controls 6
Initial Setup 7
Menu Options 7
Brightness 8
Image Settings 9
Colour Temperature Settings 10
OSD Settings 11
Reset 12
Miscellaneous Settings 13
Specification 14
Troubleshooting 15
electriQ UK Support 15

2
SAFETY INFORMATION
•Read these instructions - All the safety and operating instructions should be
read before this product is operated.
•Keep these instructions - The safety and operating instructions should be
retained for future reference.
•Heed all warnings - All warnings on the appliance and in the operating
instructions should be adhered to.
•Follow all instructions - All operating and usage instructions should be followed.
•Do not use this equipment near water, or in humid environments –The
appliance should not be used near water or moisture e.g. in a wet basement or
near a swimming pool.
•Clean only with a dry cloth. Do not use solvents or petroleum based fluids.
•Do not block any ventilation openings.
•Do not install near any heat sources such as radiators, stoves or other
apparatus (including amplifiers) that produce heat.
•Do not tamper with the supplied plug. This plug is a BS1363 standard plug.
•Protect the power cord from being walked on or trapped, particularly at the plug
and at the point where it exits from the appliance.
•Only use attachments/accessories specified by the manufacturer.
•Use only with a cart, stand, tripod, bracket or table specified by the
manufacturer or sold with the apparatus. When a cart or stand is used, use
caution when moving it to avoid any injuries or damage from it tipping over.
•Unplug the apparatus during lightning storms or when unused for long periods
of time.
•Refer all servicing to qualified personnel. Servicing is required when the
apparatus has been damaged in any way, such as if the power supply cord or
plug is damaged, liquid has been spilled or objects have fallen into the
apparatus or it has been exposed to rain or moisture, it does not operate
normally or has been dropped.
•Please keep the unit in a well-ventilated environment.
•The monitor should only be connected to a mains power supply as rated on the
back of the equipment.
•To prevent overload, do not share the same power supply socket with too many
other electronic components.
•Do not place any connecting wires where they may be stepped on or tripped
over.
•Do not place heavy items on the cable as this may cause damage.
•When removing from a socket hold by the plug and not the wires.
•Disconnect the power immediately and seek professional help if the plug or
cable is damaged, liquid has spilt onto the unit, if accidentally exposed to water
or moisture, if anything accidentally penetrates the ventilation slots or if the unit
does not work normally.
•Do not remove the safety covers. There are no user serviceable parts inside.

3
Trying to service the unit yourself is dangerous and may invalidate the product's
warranty. Only qualified personnel should service this apparatus.
•Do not block ventilation slots on the back cover. The monitor can be placed in a
cabinet but ensure at least 5cm (2") clearance all around. Do not tap or shake
the screen, this may damage internal components.
•Due to our continuous product development, the operation and or features of
the product received may vary slightly from the information provided within the
manual.
•WARNING: To reduce the risk of fire or electric shock, do not expose this
apparatus to rain or moisture. The apparatus shall not be exposed to dripping
or splashing and objects filled with liquids, such as vases, shall not be placed
on the apparatus.
•WARNING: The wall plug socket is used as a disconnection device and should
remain readily accessible.
•WARNING: The batteries shall not be exposed to excessive heat such as direct
sunlight or fire.

4
WHAT’S INCLUDED

5
CONNECTIONS AVAILABLE ON THE MONITOR
1.
HDMI port
Used to connect a compatible device. Supports
HDMI 1.4 & 2.0 ;
2.
Display Port
Used to connect a compatible device. Supports
Display Port 1.2
3.
Type-C
Supports data transmission, external charging and
image display.
4.
USB
Used for connecting compatible USB devices
5.
USB
Used for connecting compatible USB devices
6.
Audio out port
Used for connecting headphones or external speakers
7.
DC12V
Power.

6
WALL MOUNTING
The monitor is provided with mounting holes for a VESA approved wall mounting bracket (not
supplied)
The VESA mounting pattern is: 100x100mm and the size of the screws is 4 x M6 x 10 (not supplied)
Do not use screws longer than specified or damage will occur to the internal components.
NOTE: As the monitor is considered heavy, please consult with a professional wall mount installer to
perform the installation.
GETTING STARTED
MONITOR CONTROLS
EXIT
Source Menu
Within OSD: Go back to previous menu / exit the on screen display
Decrease the volume.
Within OSD: Move down/left
Increase the volume.
Within OSD: Move up/right
MENU
Enter the OSD menu
Within OSD: Select the highlighted option.
POWER
Turn the monitor on and off.

7
INITIAL SETUP
Connect the monitor to a power outlet.
1. Press the POWER button on the monitor or to turn it on (The indicator will be blue)
2. Connect the relevant cable to the corresponding input on the monitor. The source will be
automatically detected.
3. To change between inputs, press the EXIT button to enter the source menu. Use the and
buttons to choose the input source between Type C, DP and HDMI.
MENU OPTIONS
The menu for the monitor can be accessed by pressing the MENU button on the control panel. This
menu is separated into the following sub menus: Brightness, Image, Colour Temperature, OSD
Settings, Reset, and Miscellaneous options, details of each menu can be found in the following
section.
Please Note: Some settings may not be adjustable in which case they will be grayed out. This could
be due to the input source or other options chosen within the menus.

8
BRIGHTNESS
BRIGHTNESS
Allows the adjustment of the image brightness, according to ambient light in the
room. Value “0-100”
CONTRAST
Allows the adjustment of the contrast between white and black areas of the
image. Value “0-100”
ECO
Allows selection of image settings between the following: STANDARD, TEXT,
MOVIE, GAME, FPS, and RTS”.
DCR
Allows the dynamic contrast of the picture to be turned ON and OFF
HDR MODE
Allows to change the value between “OFF, AUTO, 2084 “.

9
IMAGE SETTINGS
H. POSITION
Allows adjustment of the horizontal position of the display image. Press the and
buttons to horizontally move the image.
V.POSITION
Allows adjustment of the vertical position of the display image. Press the and
buttons to vertically move the image.
CLOCK
Allows adjustment of the CLOCK setting. Value “0-100”
PHASE
Can reduce video distortion and instability. Value"0-100"
ASPECT
Allows selection of video format of the between “16:9, 4:3 “.

10
COLOUR TEMPERATURE SETTINGS
COLOR TEMP.
Allows adjustment of the colour settings between the following options:
”Normal – Warm - Cool - User”.
When set to “User”, you have full control to alter the individual settings
Red : 0-100, Green: 0-100, and Blue : 0-100.
RED
Allows adjustment of the red element of the image
GREEN
Allows adjustment of the green element of the image
BLUE
Allows adjustment of the blue element of the image

11
OSD (ON SCREEN DISPLAY) SETTING
LANGUAGE
Allows selection of desired language: “ENGLISH, FRENCH, TURKISH, ITALIAN,
SPANISH, PORTUGUESE, CHINESE, DUTCH, JAPANESE, GERMAN,
POLISH,
AND KOREAN.”
OSD H. POS
Allows adjustment of the horizontal position of the OSD
OSD V. POS
Allows adjustment of the vertical position of the OSD
OSD TIMER
Allows adjustment of the duration of the OSD, value “5-60”
TRANSPARENCY
Allows adjustment of the transparency of the OSD, value “0-100”.

12
RESET
RESET
Returns the monitor to its factory default settings.
OD (Overdrive)
Allows the monitor to force a faster response time when activated (165Hz).

13
MISCELLANEOUS
SIGNAL SOURCE
Allows user to choose the signal source of the display “HDMI, DP and Type
C”.
VOLUME
Allows adjustment of the volume of the monitor from “0-100”.
LOW BLUE LIGHT
Allows adjustment of the low blue effect of the display, value : 0-25-50-75-100.
FREE SYNC
Allows FreeSync to be turned ON and OFF.

SPECIFICATION
eiQ-25FHDO165FSGUC
Panel Type
25" (16:9) LED Backlit Monitor
Panel Dimensions
623mm Diagonal
Case Type
Plastic
Best Resolution
1920(H) x 1080(V) @ 144Hz (165Hz Overdrive)
Active Display Area
543.744(H) X 302.616 (V)
Pixel Pitch
283.2 x 280.2
Contrast Ratio
1000:1 Typical
Brightness
400 cd/m²
Response Time
5ms(GTG)
Viewing Angle
176°/170° CR≥10
Display Colours
1.07G
Adjustable Colour
Temperature
WARM/ COOL /USER
Video Compatibility
Multi-Standard for NTSC / PAL
Aspect Ratio
16: 9
Speaker Multimedia
Speakers
2 X 3W
Sound Demodulation
Stereo. Audio
Mute
Yes
Operating Humidity
20 % - 70 %
Operating Temperature
- 10 to 50 °C
IN/OUT INTERFACE
Video Interface
HDMI 2.0 x 1, DP 1.2 x 1,Type-Cx1,USBx2
Audio Interface
Audio Out x 1
Safety & EMC Certification
CE / FCC / ROHS
Stand Type
Desktop
Button Position
Right Hand Side
POWER Input
DC 12V 3A
Power Consumption
≤ 36W

TROUBLESHOOTING
Problem
Solution
No power
Insert the plug securely into the power outlet.
No picture
Ensure that the equipment is connected properly.
Ensure the correct input is selected.
Buttons on the monitor don’t
do anything
Disconnect the power plug and then reconnect it.
(The unit may not be operating properly due to
lightning, static, or other factors.)
Noise or other interference
Electronic equipment near the unit may be causing
interference. Relocate the unit or move the
equipment.
ENVIRONMENTAL PROTECTION
Waste electrical products should not be disposed of with household waste.
Please recycle where facilities exist. Check with your Local Authority or
retailer for recycling advice.
electriQ UK SUPPORT
www.electriQ.co.uk/support
If the unit fails to operate call: 0871 620 1057 or complete the online form Office
hours: 9AM - 5PM Monday to Friday
www.electriQ.co.uk
Unit J6, Lowfields Business Park
Lowfields Way, Elland
West Yorkshire, HX5 9DA
15