Electro-Voice N/D367s User manual

Technical Specifications:
TheElectro-VoiceN/D367sisamemberofafamilyofmicrophones
that are manufactured with refinements that enhance the sonic
smoothness, improve gain-before-feedback and provide more
consistent performance with greater durability than earlier
generationsofN/DYM®microphones.
Thecontrolled responseof theN/D367s allowsthe userto easily
workthe microphoneforoptimal performance.
The N/DYM® magnet geometry used in the N/D367s, combined
witha reinforceddiaphragm design,creates asmooth, extended
frequency response with a warm, open and transparent sound
quality.
The N/DYM® microphones feature EV’s AcoustiDYMTM shock -
mountsystem. This uniquevibration isolatingsystemworks asa
multistagedevice. Atlow frequencies,arearsound wavecancels
the diaphragm motion, while, at high frequencies, the specially
designedrubbershockmountisolatesthetransducer frommotion.
CombiningAcoustiDYMTM withtheelastomericWarm-GripTMhandle
andthe windscreen bumperproduces an advanced technology,
vibrationisolating systemwhichdramatically reducesall formsof
handlingnoisefor themostdemanding situations.
TheN/D367shasa cardioidpolarpattern,providing an enhanced
front-area sensitivity and acoustic rejection directly behind the
microphone,reducingfeedbackunderliveperformanceconditions.
Thisis particularlyuseful withtypical monitorspeaker placement
andhighsound pressure(SPL)requirements. Additionally,theN/
D367s’s polar patterns are unusually uniform with frequency,
ensuring superior gain-before-feedback in live applications and
superiorisolation whenusedin thestudio.
The N/D367s pop filter’s unique design utilizes a specially
processedAcoustifoamTM filter to minimizewind noiseand vocal
P-pops. This design makes the pop filter an integral part of the
microphone’s removable front grille assembly, allowing easy
cleaningfor continued topperformance.
:tnemelEerutcurtstengamMYD/NcimanyD
:esolC,esnopseR.qerFzH000,22-zH03
:raF,esnopseR.qerFzH000,22-zH06
:nrettaPraloPdioidraC
tiucriCnepO,ytivitisneS :zHk1@egatloV lacsap/Vm0.3
:egnaRcimanyDBd441
:esioNtuptuOtnelaviuqEdethgiewABd41 )lacsap20000.0=Bd0(
:ytiraloPsesuacmgarhpaidnoerusserpevitisoP 3nip.fer2nipnoegatlovevitisop
:ecnadepmI)z-wol(decnalabsmho053
:rotcennoCenohporciMepytRLXnip3
:hsiniFkcalbgnitcelfer-noN
:dedulcnIseirosseccAretpadAdnatSciM gaB"giG"dereppiZtfoS
:htgneL,snoisnemiD :retemaiD :knahS )mm181("21.7 )mm25("50.2 )mm02("08.0
:thgieWteN)g852(zo1.9
:thgieWgnippihS)g535(zo9.81
General Description:
N/D367s
N/DYM®DynamicCardioid
Vocal Microphone
Key Features:
• Classic N/DYM® sound
• Smooth, controlled frequency response
• High N/DYM® sensitivity
• Superior multistage shock mount and “Warm
Grip” handle for unmatched low handling
noise
• On/Off switch
• Also sounds great when used on a podium
The N/D367s also features a noiseless on/off switch, which is
useful in giving the speaker/vocalist control of their signal to the
mixer.

12000 Portland Avenue South, Burnsville, MN 55337
Phone:[phone],Fax:[phone]
www.electrovoice.com
© Telex Communications, Inc. 9/2003
Part Number 534569 Rev. D
N/D367s Part Number: 301341-000
Polar Response:Frequency Response:
Dimension Drawing:
(5dBperdivision)
1000 Hz
180°
0°
90°
270°
30°
60°
120°
150°
210°
240°
300°
330°
U.S.A. and Canada only. For customer orders, contact Customer Service at:
800/392-3497 Fax: [phone]
Europe, Africa, and Middle East only. For customer orders, contact Customer Service at:
+ 49 9421-706 0 Fax: + 49 9421-706 265
Other International locations. For customer orders, contact Customer Service at:
+ 1 952 884-4051 Fax: + 1 952 736-4212
For warranty repair or service information, contact the Service Repair department at:
800/553-5992 or 402/467-5321
For technical assistance, contact Technical Support at:
800/392-3497 or 952/736-4656
Specifications subject to change without notice.
Standard Placement & Use Guidelines
1.Always point the microphone at the desired source of sound, and away from any unwanted sources.
2.Themicrophone should belocated close tothe sound sourceto minimize interference from otherpotential sound sources.
3.Use the 3-to-1rule when usingmultiple microphones. Place each microphonethree times fartherfrom other microphonesas from the
desired sound source.
4.Minimize over-handlingof the microphoneto reduceunwanted mechanicalnoise.
5.Working close to the microphone will increase the bass tone and also provide increased gain-before-feedback.
Microphone Use and Placement
Pleasenote that micingtechniques are amatter of personalpreference. These aremerely guidelinesto assist inthe placement ofthe
microphoneto gainoptimalperformance.
Usage Optimal Placement
Vocals Zero to six inches from the windscreen, and on axis with the microphone.
SpokenWord Five to ten inches from the windscreen, and on axis with the microphone.