Electro-Voice Phoenix PX2152 User manual

Technical Specifications:General Description:
PX2152
15” Two-Way
Dual Manifolded HF 60° x 45°
Fullrange Loudspeaker System
Key Features:
•Dual ND2 2" Voice Coil, 1" Exit
Neodymium Compression Drivers
•Dual DVX3150 15" LF Transducers with
Forced Air Cooling
•High Sensitivity, 136 dB Maximum SPL
•60° x 45° Rotatable Coverage Pattern
•1200W Continuous (4800W Peak) Power
Handling
•Passive/Biamp Selectable
•Integral Points for eyebolts or optional
Rigging Kit
• Arrayable
1 Half Space measurement.
esnopseR.qerF
1
:)Bd3-(zHk51-zH06
egnaR.qerF
1
:)Bd01-(zHk91-zH05
:ycneuqerFssapiH.ceRzH04
ytivitisneSlaixA
1
:)m1/W1(Bd99
LPSdetaluclaCxaM
1
:Bd631
:egarevoClatnoziroH°54ro,°06
:egarevoClacitreV°06ro,°54
)evissaP(gnildnaHrewoPkaePW0084,suounitnoCW0021
:)pmaiB(gnildnaHrewoPFLkaePW0004,suounitnoCW0001
:)pmaiB(gnildnaHrewoPFHkaePW023,suounitnoCW08
:recudsnarTFLrevirD)mm183(.ni51,0513XVD)2(
:srecudsnarTFHmgarhpaiD)mm05(.ni2,61-2DN)2( srevirDnoisserpmoC
:ycneuqerFrevossorCzH0091
:ecnadepmIFLlanimoNsmhO4
:ecnadepmIFHlanimoNsmhO8
:srotcennoCs'4LNnokaepSkirtueN)2(
:lairetaMerusolcnEtaoCVEkcalBhtiwdoowylPmm81
MT
:noisnepsuSno)2(dnapoTno)6(-stnioP01M)8( erusolcnEfomottoB
:ellirGAG61,detaoCredwoPretseyloP ogoLelbatatoRhtiw,leetSdezinavlaG
:)DxWxH(miDmm544xmm754xmm9121 )"05.71x"00.81x"00.84(
:thgieWteN)sbl9.111(gk67.05
:thgieWgnippihS)sbl4.331(gk15.06
The Electro-Voice®PX2152 is a high efficiency 2-way
loudspeaker system that is part of the Electro-Voice®
Phoenix Series and is intended for high output sound
reinforcement in fixed-installation and portable sound
applications. The PX2152 is capable of being
configured as either passive or biamp, and used
fullrange or with a subwoofer for LF extension.
The PX2152 uses two DVX3150 woofers, a high output
15-inch woofer with forced air cooling, in a vented
enclosure. HF is delivered by dual ND2-16
compression drivers precisely summed in a manifold for
increased power handling, maximum SPL, and low
distortion. The very low distortion 60° x 45° horn
provides the optimal coverage for medium throw, and is
rotatable. Designed to be used as array elements, two
PX2152’s can be arrayed together for 120° of horizontal
coverage in the standard configuration, or 90° if the
horns are rotated. The enclosure is constructed of 18-
mm, 13-ply plywood, using tongue and groove joints and
EVCoat for long term durability.
The PX2152 is designed as a full range loudspeaker,
and can be used with a PX2181 for maximum low
frequency output. The enclosure shares the same
footprint as other speakers in the Phoenix line for
system flexibility.

2000010000100010020
3.6
20
100
360 Vertical
Horizontal
Frequency(Hz)
-6dB Beamwidth (degrees)
20 50 100 1000 10000 20000
3.16
10
100
316
70
80
90
100
110
Frequency(Hz)
Sensitivity (dB)
Impedance (Ohms)
Passive Mode, Half Space
Biamp Mode, Half Space
Impedance
200001000010001005020
70
80
90
100
110
Frequency(Hz)
Sensitivity (dB)
On Axis
10° Down
20° Down
U.S.A. and Canada only. For customer orders, contact Customer Service at:
800/392-3497 Fax: [phone]
Europe, Africa, and Middle East only. For customer orders, contact Customer Service at:
+ 49 9421-706 0 Fax: + 49 9421-706 265
Other International locations. For customer orders, contact Customer Service at:
+ 1 952 884-4051 Fax: + 1 952 736-4212
For warranty repair or service information, contact the Service Repair department at:
800/685-2606
For technical assistance, contact Technical Support at: 866/78AUDIO
Specifications subject to change without notice.
12000 Portland Avenue South, Burnsville, MN 55337
Phone:[phone],Fax:[phone]
www.electrovoice.com
© Telex Communications, Inc. 9/2006
Part Number 38110-526 Rev. A
Frequency Response:
Block Diagram (Passive Mode):
This PX2152 Loudspeaker should be suspended overhead only
in accordance with the procedures and limitations specified.
This system should be suspended with certified rigging hard-
ware by an authorized rigging professional and in compliance
with local, state, and federal overhead suspension ordinances.
CAUTION
Dimension Drawings:
Front View
Top View
Right View
PX2152PartNumber
• 302011-001 PX2152, 60° x 45° Horn, Black Finish
PerformanceMatch
• 302015-001 PX2181, 18” Subwoofer, Black Finish
• D170401 CP4000S, 120V, 1400W x 2, Compact
Precision Series Amplifier
• D170348 DX38, Digital Loudspeaker Processor
Accessories
• ASY000003-001 EBK-M10, Forged M10 Eyebolt Kit, Set of Three
• ASY000005-001 PX-D1, Dolly Kit for PX2122 and PX2152
• ASY000006-001 PX-G1, Phoenix Grid for PX2122 andPX2152
Rear View
Block Diagram (Biamp Mode):
Beamwidth:
Frequency Response, Off-Axis (Down):