Electrolux ETG729GKT User manual

1. Open the box, take out the polyfoam, and put it on the even ground, remove and abandon
the poly bag.
2. Take out the gas stove, and put it upside down on the polyfoam, take out the legs,
knob sets and burner caps bag, release the trivets by unfasten the ties.
3. Install four legs on the four square yard by nuts as followings show
INSTALLATION INSTRUCTION
4
BE CAREFUL WHEN YOU ABANDON THE POLY BAG IF IT IS ACCESSIBLE FOR CHILDREN.
IT IS NOT A TOY FOR CHILDREN
WARNING:
ETG729GKT ETG728GK ETG726GK/ETG726XS

MAKE SURE THE SUPPLIED GAS AND PRESSURE IS THE SAME AS LABEL
MARKED, DIFFERENT GAS TYPE AND PRESSURE WILL CAUSE SERIOUS
RESULT OF BODY INJURY AND FORTUNE DAMAGE, EVEN DEATH.
WARNING:
LEAKAGE MUST BE CHECKED AT THE FIRST USE, NEVER USE
THE STOVE WITHOUT LEAKAGE CHECK
WARNING:
10. It is recommended to install range hood above the stove, and the distance between
top of the stove to bottom of the range hood is about 700mm
9. The distance between the stove and cylinder
should be around 1m, the proper length of the inlet gas
hose is 1m-2m. One side of the hose connect the
cylinder, the other side connect the gas inlet. The hose
cannot contact any other parts of stove and thrill through
the bottom of the stove, cannot bend it forcedly.
The length of gas pipe
cannot exceed 2m