Electrolux EFMG617STT User manual

EN FRONT LOAD DRYER
FR SÉCHEUSE Á CHARGEMENT FRONTAL
ES SECADORA DE CARGA FRONTAL
USE & CARE GUIDE
GUIDE D’UTILISATION ET D’ENTRETIEN
GUÍA DE USO Y CUIDADO
A04173701A August 2015

22 Finding Information
©2015 Electrolux Major Appliances All rights reserved.
Table of contents
Finding Information.........................................................2
Safety............................................................................... 3-5
Features...............................................................................6
Operating Instructions..............................................7-17
Please read and save this guide
Thank you for choosing Electrolux, the premium brand in home appliances. This Use & Care Guide
is part of our commitment to customer satisfaction and product quality throughout the life of your
new appliance.
We view your purchase as the beginning of a relationship. To ensure our ability to continue serving
you, please use this page to record important product information.
Questions?
For toll-free telephone support in the U.S.: 1-877-4ELECTROLUX (1-877-435-3287) and in Canada:
1-800-265-8352.
For online support and product information visit www.electroluxappliances.com
Purchase date
Electrolux model number
Electrolux serial number
Keep a record for quick reference
Save these instructions for future reference.
Care & Cleaning............................................................ 18
Solutions to Common Problems........................19-20
Warranty.............................................................................21
Notes ..................................................................................22
NOTE
Registering your product with Electrolux
enhances our ability to serve you. You can
register online at www.electroluxappliances.com
or by dropping your Product Registration Card
in the mail.
NOTE
The instructions appearing in this Use and
Care Guide are not meant to cover every
possible condition and situation that may
occur. Common sense and caution must be
practiced when installing, operating and
maintaining any appliance.

3
Safety
Important Safety Instructions
Recognize safety symbols, words and
labels
Your safety and the safety of others is very
important.
We have provided many important safety
messages in the Use and Care Guide,
Installation Instructions and on your appliance.
Always read and obey all safety messages.
WARNING
FIRE OR EXPLOSION HAZARD
Failure to follow safety warning exactly could result
in serious injury, death, or property damage.
Do not store or use gasoline or other flamma-
ble vapors and liquids in the vicinity of this or
any other appliance.
WHAT TO DO IF YOU SMELL GAS:
•Do not try to light any appliance.
•Do not touch any electrical switch; do not use
any phone in your building.
• Clear the room, building or area of all occupants.
• Immediately call your gas supplier from a neigh-
bor’s phone. Follow the gas supplier’s instructions.
•If you cannot reach your gas supplier, call the
fire department.
•Installation and service must be performed by
a qualified installer, service agency or the gas
supplier.
Safety items throughout this manual are labeled
with a WARNING or CAUTION based on the risk
type as described below:
This symbol alerts you to situations that may
cause bodily injury or property damage.
This symbol alerts you to situations that may
cause serious body harm, death or property
damage.

4Safety
WARNING
FIRE HAZARD
A clothes dryer produces combustible lint.
The dryer must be connected to an outdoors
exhaust. Regularly inspect the outdoor exhaust
opening and remove any accumulation of lint
around the opening and in the surrounding area.
PREVENT FIRE
●Do not dry items that have been previously
cleaned in, soaked in, or spotted with gaso-
line, cleaning solvents, kerosene, waxes, or
other flammable or explosive substances. Do
not store these items on or near the dryer.
These substances give off vapors that could
ignite or explode.
●Do not place items exposed to cooking oils
in your dryer. Items contaminated with cook-
ing oils may contribute to a chemical reaction
that could cause a load to catch fire.
●Do not dry articles containing rubber, plastic
or similar materials such as bras, galoshes,
bath mats, rugs, bibs, baby pants, plastic
bags and pillows that may melt or burn. Some
rubber materials, when heated, can under
certain circumstances produce fire by sponta-
neous combustion.
●Clean the lint screen before or after each load.
The interior of the dryer, lint screen housing and
exhaust duct should be cleaned approximately
every 18 months by qualified service personnel.
An excessive amount of lint build-up in these
areas could result in inefficient drying and pos-
sible fire. See Care and Cleaning.
●Do not operate the dryer if the lint screen is
blocked, damaged or missing. Fire hazard,
overheating and damage to fabrics can
occur.
●Do not obstruct the flow of ventilating air.
Do not stack or place laundry or throw rugs
against the front or back of the dryer.
●Do not spray any type of aerosol into, on or
near dryer at any time.
●Do not use fabric softeners or products to
eliminate static unless recommended by the
manufacturer of the fabric softener or product.
●Do not continue to use the dryer if you hear
squeaking, grinding, rubbing or other unusual
noises. This could be a sign of mechanical
breakdown and lead to fire or serious injury.
Contact a qualified technician immediately.
●Failure to comply with these warnings could
result in fire, explosion, serious bodily injury
and/or damage to the dryer.
WARNING  RISK OF FIRE
To reduce the risk of fire, electrical shock, or injury to persons when using this dryer, comply with
the basic warnings listed below. Failure to comply with these warnings could result in serious
personal injuries.
You can be killed or seriously injured if you don’t follow these Important Safety Instructions:
Avoid fire hazard or electrical shock. Do not use an adaptor plug or extension cord or remove
grounding prong from electrical power cord. Failure to follow this warning can cause serious
injury, fire or death.
Grounding type
Grounding type
10-30R
10-30R
3-wire
3-wire
240 v Electric Dryer
240 v Electric Dryer
120 v Gas Dryer
120 v Gas Dryer
14-30R
14-30R
4-wire
4-wire
(fused 30 amp)
(fused 30 amp)
(fused 30 amp)
(fused 30 amp)
wa
wa
ll receptacl
ll receptacle
Po
Po
wer cord with
wer cord with
3-prong
3-prong
gr
gr
ounded plug
ounded plug
Do not,
Do not,
under
under
an
an
y cir
y cir
cumstances,
cumstances,
cut,
cut,
remo
remo
ve
ve,
or b
or b
ypass th
ypass th
UL-approved service
UL-approved service
cord must be installed
cord must be installed
on electric dryers (not
on electric dryers (not
provided with unit
provided with unit
except those
except those
manufactured for sale
manufactured for sale
in Canada).
in Canada).
e
gr
gr
ounding pr
ounding pr
ong.
ong.

5
Safety
Important Safety Instructions, continued
PROTECT CHILDREN
●Do not allow children to play on or in the
dryer. Close supervision of children is neces-
sary when the dryer is used near children. As
children grow, teach them the proper, safe use
of all appliances.
●Destroy the carton, plastic bag and other
packing materials after the dryer is unpacked.
Children might use them for play. Cartons cov-
ered with rugs, bedspreads or plastic sheets
can become airtight chambers.
●Keep laundry products out of children’s reach.
To prevent personal injury, observe all warn-
ings on product labels.
●Before the dryer is removed from service or
discarded, remove the dryer door to prevent
accidental entrapment.
●Failure to comply with these warnings could
result in serious personal injuries.
PREVENT INJURY
●To prevent shock hazard and assure stability
during operation, the dryer must be installed
and electrically grounded by a qualified
service person in accordance with local
codes. Installation instructions are packed in
the dryer for the installer’s reference. Refer to
Installation Instructions for detailed ground-
ing procedures. If the dryer is moved to a new
location, have it checked and reinstalled by a
qualified service person.
●To prevent personal injury or damage to
the dryer, the electrical power cord of a
gas dryer must be plugged into a properly
grounded and polarized 3-prong outlet. The
third grounding prong must never be removed.
Never ground the dryer to a gas pipe. Do not
use an extension cord or an adaptor plug.
●ALWAYS disconnect the dryer from the electri-
cal supply before attempting any service or
cleaning. Failure to do so can result in electri-
cal shock or injury.
●Do not use any type spray cleanser when
cleaning dryer interior. Hazardous fumes or
electrical shock could occur.
●To prevent injury, do not reach into the dryer
if the drum is moving. Wait until the dryer has
stopped completely before reaching into the
drum.
PREVENT INJURY AND DAMAGE TO THE
DRYER
●All repairs and servicing must be performed
by an authorized servicer unless specifically
recommended in this Use & Care Guide. Use
only authorized factory parts.
●Do not tamper with controls.
●Do not sit on, step on or stand on the dryer.
Do not rest heavy loads on top. The dryer is
not meant to support weight.
●Do not install or store the dryer where it will be
exposed to the weather.
●Thermal limiter switches automatically turn off
the motor in the unlikely event of an overheat-
ed situation. A service technician must replace
the thermal limiter switch(es) after correcting
the fault.
●Failure to comply with these warnings could
result in serious personal injuries.
CAUTION
The California Safe Drinking Water and Toxic Enforcement Act requires the Governor of California
to publish a list of substances known to the state to cause cancer, birth defects or other
reproductive harm, and requires businesses to warn customer of potential exposure to such
substances. Included in this list are soot and carbon monoxide, both of which may be produced
by the use of this product.
Read all instructions before
operating this dryer.

6Features
Control Lock
LED Display
Drum Light
Exhaust Channel
Outlet
Heavy Duty
Collapsible
Drying Rack*
Reversible
Door
Door Strike
Cycle Selector
Door Latch
3 Drum Vanes
(2 tumbling)
(1 mixing)
Lint Filter
Front-Mounted
Moisture Sensor
Adjustable
Leveling Legs
Stacking Kit for Mounting
on Matching Washer*
Wide-Angle
Door Hinge
*Not all models come with drying rack and
stacking kit from the factory. They may be
purchased as accessories.

7
Operating Instructions
Normal Operating Sounds
B
C
D
E
A
You may or may not hear the following sounds
from your new dryer:
A. WATER VALVE (Steam models only.) The flow
of water is controlled by electric solenoids.
During operation there may be a clicking
sound as the valve opens and closes to
control the water flow.
B. SUSPENSION ROLLERS The dryer drum is
supported by a set of suspension rollers.
At times there may be a thumping or rolling
sound when the dryer starts. This may
happen if the dryer has not been in use for
a period of time, or after a heavy load has
remained in the dryer drum for an extended
period, creating a temporary flat spot on the
edge of the roller. The noise should dissipate
as the dryer operates and the flat spots
smooth out.
C. AIR FLOW SYSTEM Your dryer is equipped
with a high volume air handling system. In
some installations there may be some sounds
associated with air movement throughout
the dryer, including the air duct, blower, and
exhaust system. This is normal and can vary
with load size and type.
D. GAS VALVE (Gas models only.) The flow of
gas is controlled by electric solenoids. During
operation there may be a clicking sound as
the valve opens and closes to control the gas
fl o w .
E. GAS BURNER (Gas models only.) When the
burner is operating, there may be sounds
generated as the air flow mixes with the gas
flame. This noise is normal and will only occur
when the gas is ignited in the combustion
tube.

8Operating Instructions
(Mesh bag not included.)
1. Place a wet load of towels or other durable
fabrics suitable for high temperatures into
the dryer.
2. Set the dryer for the 75 minute time dry cycle
and adjust the temperature to sanitize.
3. Once the cycle is complete, remove the load.
Your dryer is now conditioned and ready to
sanitize your laundry. It is not necessary to
repeat internal dryer part conditioning.
IMPORTANT
Prior to using the sanitize feature (if available)
on your dryer for the first time, internal dryer
parts must be conditioned to ensure a com-
plete sanitization of your laundry.
Operating Your Dryer
1. Prepare load for drying.
●Dry items of similar fabric, weight and con-
struction in the same load.
●Separate dark items from light-colored
items. Separate items that shed lint from
those that attract lint.
●Check for stains which may not have been
removed in washing. Repeat stain removal
process and wash again before drying.
Dryer heat may permanently set some
stains.
●Place delicate or small items in a mesh bag.
WARNING
To reduce the risk of fire, electric shock or injury
to persons, read the IMPORTANT SAFETY
INSTRUCTIONS in this Use and Care Guide
before operating your dryer.
CAUTION
Do not operate dryer without lint filter in place.
3. Load the dryer and close the door.
●Load items loosely. The average wet load
will fill the drum 1/3 to 1/2 full. Items need
room to tumble freely for even drying and
less wrinkling.
●If desired, place a dryer fabric softener
sheet on top of the load at the beginning of
the cycle.
●To save energy and time and avoid uneven
drying and wrinkling, do not overload the
dryer.
●When drying large items, dry only two or
three items at a time. Fill out the load with
small and medium sized items.
●For delicate or very small loads, add two
or three larger items to improve tumbling
action.
●Be sure buckles, buttons and trim are heat-
proof and won’t damage the drum finish.
Close zippers; fasten hooks and Velcro®-like
fasteners. Tie strings and sashes to prevent
snagging and tangling.
2. Check that the lint filter is clean and in
place.
Before Operating Your Dryer
Read the important instructions in this section
of the Use and Care Guide before operating
your dryer.

9
Operating Instructions
●Adjustments made to cycle settings will be
remembered and recalled each time that
cycle is selected in the future.
4. Select the appropriate cycle and settings
for each load.
To return to factory settings,
press the dry level and options
buttons at the same time and
hold until the signal sounds.
IMPORTANT
Clean the lint filter after every load. CLEAN
LINT will be displayed at the end of the cycle to
remind you to remove lint from the filter.
NOTE
If a setting is not available for the cycle
selected, the indicator will not light.
NOTE
To prevent unintentional and accidental
exposure of delicate material to excess heat
or unexpected steam, the sanitize temperature
setting and the perfect steamTM option will
not be remembered and must be reselected
each time.
NOTE
If drying a single large or bulky item remove
the item part way through the cycle and turn it
“inside out” to maximize drying effectiveness.
Place item back in dryer and re-start cycle.
NOTE
Over-drying can cause wrinkles, shrinkage, lint,
harshness and a build up of static electricity.
5. Start the cycle.
●Close the door and press start. The dryer will
not operate with the door open.
●Select delay start to delay the beginning of
the cycle, if desired.
●To add a forgotten item to the dryer drum,
press pause and open the door. Opening
the door with a cycle running will also pause
the cycle. Add the item, close the door and
press start to resume the cycle.
●To change the settings or options after the
cycle starts, press pause, make the new
selections and press start again.
●To change the cycle once the cycle has
begun, press cancel to stop the current
cycle, select a new cycle, and press start
again. Just turning the cycle selector ring or
pressing the cycles button will not change
the cycle.
●A signal will sound at the end of the cycle if
the chime option has been selected.
●Press the power button turn on the unit.
●Turn the cycle selector ring (on some mod-
els) in either direction or repeatedly press
the cycles button (on other models) to scroll
to the desired cycle. The indicator for that
cycle will be illuminated. See the “Cycle
Selection” section in this guide for descrip-
tions of each cycle.
●The estimated drying time for Auto Dry
cycles or the actual drying time for Time Dry
cycles will be displayed.
●A suitable drying temperature, dryness level
and options will automatically be indicated
for the cycle selected. See the “Dryer Set-
tings Chart” for more details.
●To change the drying temperature, dry-
ness level, or drying time press the temp,
dry level or dry time buttons to scroll to the
desired settings.
6. When the cycle ends, remove items imme-
diately and hang or fold.
●To select or delete an option, press options;
then, while the indicator is blinking, press set.
The indicator will light when the option has
been selected. It will no longer be lighted
when the option has been deleted.

10
Press the power button to turn on the unit.
Turn the cycle selector ring (on select models)
in either direction or repeatedly press the cycles
button (on other models) to scroll through the
cycles.
To change the cycle once it has begun, press
the cancel button before selecting a new cycle.
Just turning the cycle selector ring or pressing
the cycles button will not change the cycle.
Cycle Selection
Operating Instructions
Follow the fabric care
label instructions
on items to
be dried.
For best results
1power 2cycle status display 3cycle selector
4temperature 5dryness level 6drying time
7options/set 8cancel 9start/pause
This manual covers many models and not all cycles, options, or features listed are available on every model. Consoles
shown above for reference only. Your model may differ.
2 71 63 854 9
600 Series
2 71 63 854 9
500 Series
2 71 63 854 9
400 Series

11
Auto Dry Cycles
Auto Dry cycles take the guesswork out of select-
ing the correct drying time for each load. Mois-
ture sensing bars in the front of the dryer drum
sense the moisture level of the load as it tumbles
through the heated air. With Auto Dry cycles, the
load will automatically be dried at the selected
temperature to the desired dryness level.
Auto Dry cycles save time and energy and
protect fabrics. When the load has reached the
selected dryness level, it will continue to tumble,
unheated, during a cool down period. This helps
reduce wrinkling and makes items easier to
handle during unloading.
Operating Instructions
Time Dry Cycles
time dry
To manually select the drying time for any load,
scroll the cycle selector indicator to time dry.
Drying times from 30 to 60 minutes or 75 minutes
(on select models) can be selected by pressing
the dry time button. Drying time will be dis-
played. Select any drying temperature. Because
this is not an Auto Dry cycle, you will not be
able to select a dryness level.
20min fast dry (400 series model)
Select this cycle to quickly dry small loads in 20
minutes.
18min fast dry (500 series model)
Select this cycle to quickly dry small loads in 18
minutes.
15min fast dry (600 series model)
Select this cycle to quickly dry small loads in 15
minutes.
instant refresh
Select this cycle to refresh fabrics, remove
odors and reduce static by injecting the perfect
amount of steam into clothing that has been left
in the dryer, stored in crowded closets, drawers,
or unpacked luggage.
WARNING
FIRE HAZARD
To avoid fire hazard, do not use heat to dry
items containing feathers or down, foam
rubber, plastics similarly textured, rubber-like
materials. Use the time dry cycle and the air
dry (no heat) setting.
Drying time varies depending on size and
dampness of load and fabric type. If the load
is too small or almost dry, the moisture sensing
bars may not detect enough moisture to con-
tinue the cycle and the cycle may end after a
few minutes. If this occurs, then select the time
dry cycle to dry such loads.
Room temperature and humidity, type of instal-
lation and electrical voltage or gas pressure can
also affect drying time.
normal
Select this cycle to dry everyday fabrics includ-
ing cottons, linens and sheets.
towels
Select this cycle to dry heavy loads such as
towels and non-rubber-backed bath mats.
mixed load (on select models)
Select this cycle to dry loads containing a mix
of fabrics.
heavy duty
Select this cycle to dry durable fabrics such as
jeans and overalls.
allergen (on select models)
Select this Auto Dry cycle where you wish to
reduce allergens as you dry your load. Items
prone to heat damage are not recommended
for this cycle.
casual (on select models)
Select this cycle to dry cottons, blends and
permanent press items with a no-iron finish.
delicates
Select this cycle to dry knits and delicates.
NOTE
Initial cycle times for Auto Dry Cycles are only
estimates. Actual drying time may be longer or
shorter than displayed time.
NOTE
It is not recommended to use fabric softener
sheets with steam cycles or steam options as it
may cause staining on clothes.

12 Operating Instructions
The appropriate drying temperature will auto-
matically be indicated for the cycle selected. To
change the preset temperature, press the temp
button to scroll to the desired setting.
To protect your fabrics, not all temperatures are
available with every cycle. If a temperature is not
appropriate for the cycle, it cannot be selected
and will not be lit by pressing the temp button.
With exception of sanitize, the temperature select-
ed for the cycle will be remembered and recalled
each time that cycle is selected in the future.
Follow the fabric care label instruc-
tions on items to be dried.
For best results
sanitize (on select models)
Recommended for durable fabrics and towels.
Use this selection to remove harmful bacteria
from your clothing or other items where sanitiza-
tion is desired.
This option will kill 99.9% of bacteria. A higher
temperatures is required. Please check fabric
care labels to prevent damage.
high
Recommended for most cotton fabrics.
normal
Recommended for wrinkle free, easy care, light-
weight fabrics and bulky loads.
low
Recommended for delicate fabrics.
air dry
This setting (no heat) should only be used with a
time dry cycle to dry items containing feathers,
down, foam rubber, plastics or rubber-like ma-
terials; to refresh clothing, stuffed animal, pillows
or blankets; and to dust draperies.
The appropriate dryness level will automati-
cally be indicated when the cycle is selected.
To change the preset level, press the dry level
button to scroll to the degree of dryness desired.
To protect your fabrics, not all dryness levels
are available with every cycle. If a dryness level
is not appropriate for the cycle, it cannot be
selected and will not be lit by pressing the dry
level button.
The dryness level selected for the cycle will be
remembered and recalled each time that cycle
is selected in the future.
Select the normal dryness level for most Auto
Dry cycles.
Occasionally a load may seem too damp or
over-dried at the end of the cycle. To increase
drying time for similar loads in the future, se-
lect high or max (on select models). For loads
requiring less drying time, select less.
Select damp for items you wish to partially dry
before hanging or ironing.
Cycle Settings
Drying Temperature Dryness Level (Auto Dry)
NOTE
To change the temperature once the cycle has
begun, press the pause button, make the new
selection and press start again.
NOTE
To change the dryness level once the cycle
has begun, press the pause button, make the
new selection and press start again.

13
Operating Instructions
Cycle Options
Suitable options will automatically be indicated
when the cycle is selected. To add an option,
press options until the indicator for the desired
option flashes, then press set. The indicator will
be illuminated when the option has been select-
ed. Follow the same steps to delete an option.
To protect your fabrics, not all options are avail-
able with every cycle. If an option is not avail-
able for a cycle, the indicator will not light.
Occasionally, two options or settings in the same
cycle will conflict with each other, like eco op-
tion and sanitize temperature (on select models).
When this happens, the option selected first will
cause the conflicting option to not be selectable.
extended tumble (on select models)
Select the extended tumble option if the dried
load might not be removed promptly at the end
of the cycle. The dried load will tumble continu-
ously without heat for 30 minutes. A chime will
sound periodically to remind you to remove the
dried load.
The wrinkle release option can be selected with
extended tumble to increase the amount of time
the load will tumble without heat up to 75 minutes.
delay start
Use delay start to select a drying time conve-
nient to your schedule or during off-peak energy
hours. The start of any cycle can be delayed for
30 minutes to 12 hours. Scroll through the op-
tions to select the delay start option, press
set and then to scroll to the delayed desired
time setting with the cycle selector. After choos-
ing the desired delay time, press start and the
delay time will begin counting down.
perfect steamTM
The perfect steamTM option injects steam
into the clothing prior to cool down to reduce
wrinkling, ironing and static cling.
NOTE
It is not recommended to use fabric softener
sheets with steam cycles or steam options as it
may cause staining on clothes.
NOTE
To change the options once the cycle has
begun, press the pause button, make the new
selections and press start again.
NOTE
While counting down during delay start, you
will notice your dryer periodically tumbling for
a few minutes without heat to redistribute the
load, maximizing load freshness.
anti-static (on select models)
The anti-static option injects steam into the
clothing just before cycle completion to reduce
static.
wrinkle release
The wrinkle release option helps prevent
wrinkles and tangling by tumbling the dry
load without heat for 5 minutes out of every 10
minutes. The 5 minutes on and 5 minutes off is
repeated for a total 45 minutes. A chime will
sound after every 5 minute tumble to remind you
to remove the dried load.
The extended tumble (if available) option can
be selected with wrinkle release to increase the
amount of time the load will tumble without heat
for up to 75 minutes.
lock
To lock the controls between cycles, scroll to
the lock option and press set. “ ” will be
displayed on the panel. To unlock the controls
scroll to the lock option and press set. Use
this feature to reduce the likelihood of acciden-
tal operation by children.
eco
The eco option reduces the drying temperature
a few degrees to save energy. In conjunction
with automatic moisture sensors, cycle times
will increase slightly, but overall energy usage
will decrease. The symbol will be shown on
the center display to indicate the eco option is
activated.

14 Operating Instructions
Other Features
rear legs
on drum
backsheet
backsheet of
dryer drum
front legs in
air grill
Chime (press & hold set button)
A signal will sound at the end of the cycle (and
periodically during extended tumble or wrinkle
release) if this option is activated.
Drying Rack (on select models)
Use the drying rack for items which should not
be tumble dried. Extend the collapsed drying
rack and insert the rack into the dryer drum.
Place the front legs into the front air grill and
lower the rear of the rack onto the back of the
dryer drum.
Place items to be dried on top of the rack, leav-
ing space between items and not allowing them
to hang over the sides or through the holes. The
weight should not exceed 10 lbs (4.5 kg).
NOTE
For step-by-step instructions on door reversal,
refer to the Installation Instructions supplied
with this dryer.
NOTE
If your model did not come supplied from the
factory with a drying rack you may order one.
NOTE
The drying rack accessory should only be used
with time dry cycles. Use of rack with auto
dry cycles will result in a shortened cycle with
unwanted drying results.
Select the air dry setting for items containing
plastic, foam rubber, rubber-like materials,
feathers or down.
When items are dry, remove the rack and store it
in a convenient location.
Status Display
The estimated cycle time for auto dry and the
actual time for time dry will be displayed when
the cycle is selected. The estimated remaining
cycle time is displayed during the cycle. As the
dryer progresses through the cycle phases, the
row of cycle phase indicators lights up under the
cycle time.
Drum Light
The drum light will come on whenever the door
is opened to illuminate the drum during loading
and unloading. Closing the door turns off the
light. The drum light will automatically turn off if
the door is left open more than 3 minutes.
Reversible Door
Your dryer is equipped with a reversible door.
The door can be hinged on the right or left side.
Extend rack until tabs
click. Press tabs down
to collapse rack.

15
Operating Instructions
These temperature, dryness levels and options are available with the following cycles:
time dry (30-60) heavy duty mixed load 20min fast dry towels normal delicates
temp
high  
normal 
low 
air dry 
dry level
high 
normal  
less 
damp 
options
perfect steam™ 
eco  
wrinkle release  
delay start 
lock 
press & hold chime 
= Available selections. = Factory presets. = Non-modifiable presets.
Setting Chart - 400 Series Dryer

16
Setting Chart - 500 Series Dryer
These temperature, dryness levels and options are available with the following cycles:
time dry (30-60) heavy duty towels normal 18min fast dry casual delicates instant refresh
temp
sanitize 
high  
normal  
low 
air dry 
dry level
max 
high  
normal  
less 
damp 
options
perfect steam™ 
anti-static 
eco  
wrinkle release 
extended tumble 
delay start 
lock 
press & hold chime 
= Available selections. = Factory presets. = Non-modifiable presets.
Operating Instructions

17
Setting Chart - 600 Series Dryer
These temperature, dryness levels and options are available with the following cycles:
time dry (30-75) allergen heavy duty towels normal 15min fast dry casual delicates instant refresh
temp
sanitize 
high  
normal   
low 
air dry 
dry level
max 
high  
normal  
less 
damp 
options
perfect steam™ 
anti-static 
eco  
wrinkle release 
extended tumble 
delay start 
lock 
press & hold chime 
= Available selections. = Factory presets. = Non-modifiable presets.
Operating Instructions

18 Care & Cleaning
●Before cleaning the dryer drum interior, unplug
the electrical power cord to avoid electrical
shock hazards.
●Do not use any type spray cleanser when
cleaning the dryer interior. Hazardous fumes or
electrical shock could occur.
Inside
●Clean the lint filter after every load. Lint build-
up on the filter restricts air flow, which causes
longer drying times. The filter is located at
the bottom of the door opening. Remove by
pulling straight up. Remove the lint and replace
the filter.
●Occasionally a waxy build-up may form on
the lint filter and/or moisture sensing bars from
using dryer-added fabric softener sheets. To
remove this build-up, wash them with warm,
soapy water. Dry the filter thoroughly and
replace. Do not operate the dryer without the
lint filter in place.
●If the dryer drum becomes stained from non-
colorfast fabrics, clean the drum with a damp
cloth and a mild liquid household cleanser.
Remove cleanser residue before drying the
next load.
●Every 18 months a qualified servicer should
clean the dryer cabinet interior, lint screen
housing and exhaust duct. These areas can
collect lint and dust over time. An excessive
amount of lint build-up could result in inefficient
drying and possible fire hazard.
Outside
●Clean the cabinet with mild soap and water.
Never use harsh, gritty or abrasive cleansers.
●If the cabinet becomes stained, clean with di-
luted chlorine bleach (1 part bleach to 8 parts
water). Rinse several times with clear water.
●Remove glue residue from tape or labels with
a mixture of warm water and mild detergent.
Or, touch residue with the sticky side of the
tape or label.
●When cleaning chrome parts use a window
cleaner with ammonia or mild soap and water.
●Before moving the dryer, place a strip of
cardboard or thin fiberboard under the front
leveling legs to prevent damage to the floor.
IMPORTANT
Clean lint screen after every load.
WARNING
To reduce risk of fire or serious injury to persons
or property, comply with the basic warnings
listed in the Important Safety Instructions and
those listed below.
IMPORTANT
Do not store or place laundry products on top
of dryer at any time. They can damage the finish
or controls.
WARNING
FIRE HAZARD
A clothes dryer produces combustible lint.
The dryer must be connected to an outdoors
exhaust. Regularly inspect the outdoor exhaust
opening and remove any accumulation of lint
around the opening and in the surrounding area.

19
Solutions to Common Problems
Common Drying Problems
Many drying problems involve poor cleaning results, poor soil and stain removal, residues of lint and
scum, and fabric damage. For satisfactory drying results, follow these suggestions provided by The
Soap and Detergent Association.
PROBLEM POSSIBLE CAUSES SOLUTIONS PREVENTIVE MEASURES
Greasy, oily
stains
• Fabric softener sheet. • Rub fabric softener stains
with bar soap. Rinse and
rewash.
• Add a few bath towels
to small loads for proper
tumbling.
• Some “silk-like” fabrics
should be air dried.
• Use proper drying tem-
perature.
• Place fabric softener sheet
on top of load before
starting the dryer.
Lint • Overloading.
• Overdrying causes static
electricity.
• Lint screen not clean
when cycle began.
• Lint is attached to “pills.”
• Reduce load size and
rewash using liquid fabric
softener in the final rinse.
• Or, add a fabric softener
sheet and tumble without
heat.
• Use lint brush or roller to
remove lint.
• Do not overload dryer.
• Use fabric softener in
washer or dryer to reduce
static electricity.
• Remove items when they
are slightly damp to avoid
overdrying.
• Check that lint filter is clean
and in place.
Pilling
(Fibers break
off, ball up and
cling to fabric.)
• Overdrying. • Use a lint brush or shaver
to remove pills.
• Use fabric softener to
lubricate fibers.
• When ironing, use spray
starch or fabric finish on
collars and cuffs.
• Turn items inside out to
reduce abrasion.
Shrinking • Temperature too high.
• Overdrying.
• Irreversible condition. • Follow fabric care label
directions.
• If shrinking is a concern,
check load often.
• Remove items while slightly
damp and hang or lay flat
to complete drying.
• Block knits into shape.
Wrinkling • Overloading.
• Leaving items in dryer
after cycle ends.
• Reduce load size and
tumble at medium or low
heat for 5-10 minutes.
• Remove items immediately.
Hang or fold.
• Do not overload dryer.
• Remove items as soon as
cycle ends.
Isolated wet
spots on fabrics
after completed
Steam cycle
• Low water line pressure
in home is not sufficient to
atomize incoming water
during Steam cycle
• Check water line pressure • Ensure water line pressure
is minimum of 30 psi. Do
not exceed 120 psi.

20 Solutions to Common Problems
Service Prevention Checklist
Before calling for service, review this list. It may save both time and expense. The list includes com-
mon occurrences that are not the result of defective workmanship or materials in this dryer.
OCCURRENCE POSSIBLE CAUSE SOLUTION
Dryer does not
start.
Electrical power cord is not securely
plugged in or plug may be loose.
Make sure the plug fits tightly in wall outlet.
House fuse blown or circuit breaker
tripped.
Reset circuit breaker or replace fuse.
Make sure electrical line is not overloaded
and the dryer is on a separate circuit.
Thermal limiter tripped. Call authorized service person for replace-
ment.
LED displays ‘DM”. Dryer has been programmed to
temporarily perform a repeating demo
cycle.
Reset the unit back to factory default settings
as described earlier.
Dryer runs but won’t
heat.
There are 2 house fuses in the dryer cir-
cuit. If 1 of the 2 fuses is blown, the drum
may turn but the heater will not operate.
(electric models)
Replace fuse.
Gas supply valve is not open (gas
models).
Check to make sure supply valve is open.
See INSTALLATION INSTRUCTIONS for
procedure.
Dryer does not have enough air sup-
ply to support the burner flame (gas
models).
See INSTALLATION INSTRUCTIONS.
LP gas supply tank is empty or there has
been a utility interruption of natural gas
(gas models).
Refill or replace tank.
Dryer should heat when utility service is
restored.
Drying cycle takes
too long, outside of
the dryer feels too
hot or smells hot.
Lint filter is clogged with lint. Make sure all lint has been removed from the
dryer lint filter before starting each cycle.
Exhaust duct requirements have not
been met.
Exhaust duct must be at least 4 inches in di-
ameter and made of rigid or semi-rigid metal.
When in place, the duct must have no more
than four 90° bends and must not exceed
length listed in INSTALLATION INSTRUC-
TIONS.
Electric dryer is connected to a 208
volt circuit.
Drying time will be 20% longer than drying on
a 240 volt circuit.
Drying procedures have not been
followed.
See “Operating Instructions.”
Outside exhaust hood or exhaust duct
may be clogged or restricted.
Clean out any obstruction.
High humidity. Use a dehumidifier near the dryer.
Excessive wrinkling. Dryer is overloaded. Do not overload. See “Operating Instruc-
tions.”
Items left in dryer too long. Remove items as soon as cycle ends.
Insufficient sorting of items. See “Operating Instructions.”
Drying temperature too high. Follow fabric care label instructions.
Scratching or chip-
ping of the drum
finish.
Foreign objects such as coins, pins,
clips or buttons are inside the dryer.*
Always remove foreign objects from pockets
before laundering. Remove objects from drum
and restart dryer.
Permanently attached items such as
belt buckles, zippers and fasteners
may be hitting the inside of the drum.*
It may be necessary to sew a scrap of
material securely around ornaments before
drying to prevent scratching and damage to
the dryer.
*Drum damage caused by foreign objects or permanently attached items is not covered by the
warranty.