Electrolux SPEEDELIGHT User manual

SPEEDELIGHT
EN Installation and operating manual *
*Original instructions 595402901- 2021.03

2
Installation diagram

3
Installation diagram – Marine

4
Foreword
The installation, use and maintenance manual (hereinafter Manual) provides the user with information necessary for correct
and safe use of the machine (or “appliance“).
The following must not be considered a long and exacting list of warnings, but rather a set of instructions suitable for improving
machine performance in every respect and, above all, preventing injury to persons and animals and damage to property due to im-
proper operating procedures.
All persons involved in machine transport, installation, commissioning, use and maintenance, repair and disassembly must con-
sult and carefully read this manual before carrying out the various operations, in order to avoid wrong and improper actions that
could compromise the machine's integrity or endanger people. Make sure to periodically inform the user regarding the safety regu-
lations. It is also important to instruct and update personnel authorised to operate on the machine, regarding its use and
maintenance.
The manual must be available to operators and carefully kept in the place where the machine is used, so that it is always at hand
for consultation in case of doubts or whenever required.
If, after reading this manual, there are still doubts regarding machine use, do not hesitate to contact the Manufacturer or the au-
thorised Service Centre to receive prompt and precise assistance for better operation and maximum efficiency of the machine.
During all stages of machine use, always respect the current regulations on safety, work hygiene and environmental protection. It
is the user's responsibility to make sure the machine is started and operated only in optimum conditions of safety for people, ani-
mals and property.
IMPORTANT
• The manufacturer declines any liability for operations carried out on the appliance without respecting the instructions
given in this manual.
• The manufacturer reserves the right to modify the appliances presented in this publication without notice.
• No part of this manual may be reproduced.
• This manual is available in digital format by:
– contacting the dealer or reference customer care;
– downloading the latest and up to date manual on the web site;
• The manual must always be kept in an easily accessed place near the machine. Machine operators and mainte-
nance personnel must be able to easily find and consult it at any time.
For more information refer to: www.draughtmaster.com/en/ce-marking

5
Contents
A SAFETY INFORMATION .........................................................................................................................7
A.1 Children and vulnerable people safety...............................................................................................7
A.2 General information ......................................................................................................................7
A.3 General safety .............................................................................................................................8
A.4 Transport, handling and storage ...................................................................................................... 8
A.5 Installation and assembly ............................................................................................................... 8
A.6 Electrical connection .....................................................................................................................9
A.7 Use: Warnings .............................................................................................................................9
A.8 Machine cleaning and maintenance................................................................................................ 10
A.9 Ordinary maintenance ................................................................................................................. 11
A.10 Service..................................................................................................................................... 11
A.11 Machine disposal........................................................................................................................ 11
B WARRANTY ....................................................................................................................................... 12
B.1 Warranty terms and exclusions ...................................................................................................... 12
C GENERAL INFORMATION .................................................................................................................... 12
C.1 Introduction ............................................................................................................................... 12
C.2 Definitions................................................................................................................................. 12
C.3 New concept appliance................................................................................................................ 13
C.4 Machine and manufacturer's identification data ................................................................................. 13
C.5 Copyright.................................................................................................................................. 13
C.6 Responsibility ............................................................................................................................ 13
C.7 Keeping the manual .................................................................................................................... 13
C.8 Recipients of the manual .............................................................................................................. 13
C.9 Personal protection equipment ...................................................................................................... 14
D GENERAL SAFETY RULES................................................................................................................... 14
D.1 Introduction ............................................................................................................................... 15
D.2 Protection devices installed on the machine ..................................................................................... 15
D.2.1 Guards ........................................................................................................................... 15
D.3 Safety signs to be placed on the machine or near its area.................................................................... 15
D.4 End of use ................................................................................................................................ 15
D.5 Instructions for use and maintenance.............................................................................................. 15
D.6 Reasonably foreseeable improper use ............................................................................................ 15
D.7 Residual risks ............................................................................................................................ 16
E TECHNICAL DATA TABLE ..................................................................................................................... 16
E.1 Main technical characteristics........................................................................................................ 16
E.2 Characteristics of power supply ..................................................................................................... 17
F PRODUCT DESCRIPTION .................................................................................................................... 18
F.1 Appliance overview..................................................................................................................... 18
F.2 Control panel overview ................................................................................................................ 18
F.2.1 Display ........................................................................................................................... 18
F.3 Accessories delivered with the appliance ......................................................................................... 18
G TRANSPORT, HANDLING AND STORAGE .............................................................................................. 19
G.1 Introduction ............................................................................................................................... 19
G.2 Transport: Instructions for the carrier............................................................................................... 19
G.3 Handling................................................................................................................................... 19
G.3.1 Procedures for handling operations....................................................................................... 19
G.3.2 Shifting ........................................................................................................................... 19
G.3.3 Placing the load ................................................................................................................ 19
G.3.4 Placing the load ................................................................................................................ 19
G.4 Storage .................................................................................................................................... 19
H INSTALLATION AND ASSEMBLY ........................................................................................................... 19
H.1 Introduction ............................................................................................................................... 19
H.2 Customer's responsibilities ........................................................................................................... 19
H.3 Appliance space limits ................................................................................................................. 19
H.4 Positioning................................................................................................................................ 20
H.4.1 Adjustment of the minimal distance between the glass and the upper plate (models equipped
only)............................................................................................................................... 20
H.5 Workplace................................................................................................................................. 20
H.6 Unpacking ................................................................................................................................ 20
H.6.1 Feet installation ................................................................................................................ 20
H.7 Electrical connection ................................................................................................................... 20
H.8 Disposal of packing..................................................................................................................... 21
I NORMAL MACHINE USE...................................................................................................................... 21
I.1 Characteristics of personnel trained for normal machine use ................................................................ 21
I.2 Characteristics of personnel enabled to operate on the machine ........................................................... 21
I.3 Operator qualified for normal machine use ....................................................................................... 22
J OPERATING....................................................................................................................................... 22
J.1 Start up .................................................................................................................................... 22
J.2 Set a program............................................................................................................................ 22
J.3 Basic set up settings ................................................................................................................... 23
J.4 Basic settings ............................................................................................................................ 23

6
J.5 Advanced settings ...................................................................................................................... 26
J.6 Daily use .................................................................................................................................. 31
K REMOVABLE TEFLON PLATE (RTP) ...................................................................................................... 31
K.1 Removable Teflon Plate (RTP) use ................................................................................................. 31
K.2 Replacement of Removable Teflon Plate (RTP) on top heating plate ...................................................... 31
K.2.1 Tip ................................................................................................................................. 32
L TROUBLESHOOTING.......................................................................................................................... 32
L.1 Suggestions for quality cooking ..................................................................................................... 32
L.2 Anomaly table............................................................................................................................ 33
M APPLIANCE CLEANING ....................................................................................................................... 39
M.1 Precautions for cleaning............................................................................................................... 39
M.2 External cleaning........................................................................................................................ 39
M.3 Glass cleaning in use .................................................................................................................. 39
M.4 Daily cleaning ............................................................................................................................ 39
M.5 Weekly cleaning......................................................................................................................... 41
N APPLIANCE MAINTENANCE................................................................................................................. 42
N.1 Care information......................................................................................................................... 42
N.2 Decommissioning ....................................................................................................................... 42
N.3 Disassembly.............................................................................................................................. 43
N.4 Maintenance intervals.................................................................................................................. 43
N.4.1 Preventive Maintenance ..................................................................................................... 43
N.5 Maintenance frequency................................................................................................................ 43
N.6 Precautions in case of long idle periods ........................................................................................... 43
O APPLIANCE DISPOSAL........................................................................................................................ 43
O.1 Procedure regarding appliance dismantling macro operations .............................................................. 43

7
A SAFETY INFORMATION
A.1 Children and vulnerable people safety
• This appliance must not be used by persons without adequate experience and
knowledge its use. Only specialized personnel are authorized to operate on the
appliance.
• Children must not use this appliance or play with it.
• User cleaning and maintenance shall not be made by children.
• This appliance must not be used by persons with reduced physical, sensory or mental
capabilities.
• This appliance can be used by children aged from 8 years and above and persons with
reduced physical, sensory or mental capabilities or lack of experience and knowledge if
they have been given supervision or instruction concerning use of the appliance in a
safe way and understand the hazards involved.
• Do not let children play with the appliance.
• Keep all packaging and detergents away from children.
• Cleaning and user maintenance shall not be made by children without supervision.
CAUTION
Do not wash the appliance with direct or high pressure jets of water.
WARNING
If the power cable is damaged it must be replaced by the Customer Care
Service or in any case by specialised personnel, in order prevent any risk.
A.2 General information
To ensure safe use of the machine and a proper understanding of the manual it is
necessary to be familiar with the terms and typographical conventions used in the
documentation. The following symbols are used in the manual to indicate and identify the
various types of hazards:
WARNING
Danger for the health and safety of operators.
WARNING
Danger of electrocution - dangerous voltage.
CAUTION
Risk of damage to the machine or the product.
IMPORTANT
Important instructions or information on the product
Equipotentiality
Read the instructions before using the appliance

8
Clarifications and explanations
A.3 General safety
• The machines are provided with electric and/or mechanical safety devices for protecting
workers and the machine itself.
• Never operate the machine, removing, modifying or tampering with the guards,
protection or safety devices.
• Do not make any modifications to the parts supplied with the appliance.
• Several illustrations in the manual show the machine, or parts of it, without guards or
with guards removed. This is purely for explanatory purposes. Do not use the machine
without the guards or with the protection devices deactivated.
• Do not remove, tamper with or make illegible the safety, danger and instruction signs
and labels on the machine.
• Place emergency telephone numbers in a visible position.
• The A-weighted emission sound pressure level does not exceed 70 dB(A).
• Turn the appliance off in case of fault or poor operation.
• Do not use products (even if diluted) containing chlorine (sodium hypochlorite,
hydrochloric or muriatic acid, etc.) to clean the appliance or the floor under it.
• Do not use metal tools to clean steel parts (wire brushes or Scotch Brite type scouring
pads).
• Do not allow oil or grease to come into contact with plastic parts. Do not allow dirt, fat,
food or other residuals to form deposits on the appliance.
• Do not spray water or use water jets or steam cleaner.
• Do not store or use gasoline or other flammable vapours, liquids or items in the vicinity of
this or any other appliance.
• Do not spray aerosols in the vicinity of this appliance while it is in operation.
• Do not place flammable liquids (e.g. spirits) inside the oven during operation.
• Install the appliance under conditions of adequate ventilation in order to provide a
suitable air change per hour. Make sure that the ventilation system, whatever it is,
always remains operational and efficient for the entire period of time during which the
equipment is operating.
A.4 Transport, handling and storage
• Do not stand under suspended loads during loading/ unloading operations.
Unauthorized personnel must not enter the work area.
• The weight of the appliance alone is not sufficient to keep it steady.
• For machine lifting and anchoring, do not use movable or weak parts such as: casings,
electrical raceways, pneumatic parts, etc.
• Do not push or pull the appliance to move it, as it may tip over.
A.5 Installation and assembly
• Appliance positioning, installation and disassembly must be carried out by a specialised
technician.
• The machine is not suitable for installation outdoors and/or in places exposed to
atmospheric agents (rain, direct sunlight, etc.).
• The above operations must be carried out by the specialised technician in conformity
with the current safety regulations, regarding the equipment used and the operating
procedures.
• The plug must be accessible after positioning the appliance in the place of installation.

9
• Disconnect the appliance from the power supply before carrying out any installation
procedure.
A.6 Electrical connection
• Work on the electrical systems must only be carried out by a qualified electrician, to
prevent any risk.
• If the power cable is damaged or too short, call the Customer Care Service or a qualified
electrician to replace it.
A.7 Use: Warnings
To reduce the risk of burns, electric shock, fire, injury to persons, or exposure to
excessive microwave energy
1. Read all instructions before using the appliance.
2. Read and follow the specific PRECAUTIONS FOR SAFE USE TO AVOID POSSIBLE
EXPOSURE TO EXCESSIVE MICROWAVE ENERGY in I Normal machine use
chapter.
3. Do not use the appliance without any load.
4. This appliance must be grounded. Connect only to properly grounded outlet. See
"GROUNDING INSTRUCTIONS" in H.7 Electrical connection chapter.
5. Install or locate this appliance only in accordance with the provided installation
instructions.
6. Some products such as whole eggs and sealed containers – for example, closed glass
jars – can explode and should not be heated in this appliance.
IMPORTANT
Make sure to apply in a conspicuous place and close to the appliance, the
following information supplied: “Warning: liquids or other foods must not
be heated in sealed containers since they are liable to explode.“
7. Use this appliance only for its intended use as described in the manual. Do not use
corrosive chemicals or vapors in this appliance. This type of appliance is specifically
designed to heat, cook sandwiches. It is not designed for laboratory use.
8. The appliance is intended only for professional use, not for household application.
9. As with any professional appliance, it cannot be use by unqualified people or children.
10.Do not operate this appliance if it has a damaged cord or plug, if it is not working
properly, or if it has been damaged or dropped.
11. Do not use the appliance if it is damaged. It is particularly important that the lid close
properly and that there is no damage on the glass.
12.Before each use, the user is responsible of verifying the general integrity and
cleanliness of the appliance and stop or no using it in case of noted dirt, damage or
missing parts.
13.This appliance should be serviced only by qualified service personnel. Contact
nearest authorized service facility for examination, repair, or adjustment.
14.The appliance has an internal air-cooling system (back and front). The air intake and
outlet openings of the appliance must not be blocked with objects or cloths, otherwise
excessive overheating and damage to the appliance could occur. Do not place objects
on the outlets located at the top of the appliance.
15.Do not store this appliance outdoors. Do not use this product near water – for example,
near a kitchen sink, in a wet basement, near a swimming pool, or similar locations.
16.Do not immerse the appliance, the upper heating plate, cord or plug in water.
17.Keep the power cord away from any heated surfaces of the appliance.

10
18.Do not let cord hang over edge of table or counter.
19.To reduce the risk of fire in the heating cavity:
a. The appliance is designed for direct heating/cooking of sandwich. Any other use is
to be considered improper.
b. Do not overcook sandwiches. DO NOT place plastic or other combustible
materials, cooking utensils or other item (in all materials it could be) inside the
appliance. Place ONLY sandwiches, with the designated specific baking paper (for
models equipped).
c. If materials inside the appliance ignite, turn appliance off and disconnect the
power cord.
d. Do not leave things on the glass, do not use the cooking chamber for storage
purposes. Do not leave cooking utensils or sandwiches in the cavity when not in
use.
e. Do not use the appliance to warm sandwich in metallic pots, pans, sheets, utensils.
f. Clean regularly the glass and the upper heating plate, removing all the debris.
Carbon deposit could overheat the sandwiches and the microwaves can burn the
grease and burned deposit.
20.The maximum height of the sandwich to be cooked must not overpass 3″/75 mm.
21.During operation, pay attention to the hot zones of the exterior surface. The cooking
zones remain hot. Even with the appliance switched off.
22.As in any microwave appliance, sparks can occur inside the cooking chamber. These
sparks do not influence the safety of the user nor the appliance nor the quality of the
sandwich. If, because of the sparking, a dark mark on the metal part is visible, this can
be cleaned with a damp cloth.
23.Periodically clean the appliance, removing all traces of sandwich; failure to keep it
clean will lead to deterioration of the surfaces.
24.The supplied tool (scraper) shall to be used only for cleaning purpose. See M.4 Daily
cleaning chapter.
25.Have the appliance fully checked periodically (at least once a year). For that purpose,
it is advisable to stipulate a maintenance contract.
26.It is hazardous for anyone other than a competent person to carry out any service or
repair operation that removal of any cover which gives protection against exposure to
microwave energy
SAVE THESE INSTRUCTIONS CAREFULLY FOR FURTHER CONSULTATION BY THE
VARIOUS OPERATORS
A.8 Machine cleaning and maintenance
• Work on the electrical equipment must only be carried out by a specialised electrician or
the After- Sales Service.
• Before carrying out any cleaning or maintenance, disconnect the appliance from the
power supply and carefully unplug it.
• During maintenance, the cable and plug must be kept in a visible position by the
operator carrying out the work.
• Do not touch the appliance with wet hands or feet or when barefoot.
• Do not remove the safety guards.
• Respect the requirements for the various ordinary and extraordinary maintenance
operations. Non-compliance with the instructions can create risks for personnel.
• Maintenance, checking and overhaul operations must only be carried out by a
specialised technician or the Customer Care Service, provided with suitable personal
protection equipment (safety shoes and gloves), tools and ancillary means. Refer to
“C.9 Personal protection equipment“ for suitable personal protection equipment.