Electrolux EHD60150P User manual

user manual
Induction Hob
EHD60150P

Electrolux. Thinking of you.
Share more of our thinking at www.electrolux.com
CONTENTS
Safety information 2
Installation instructions 3
Product description 5
Operating instructions 6
Helpful hints and tips 9
Care and cleaning 10
What to do if… 10
Environment concerns 12
Subject to change without notice
SAFETY INFORMATION
For your safety and correct operation
of the appliance, read this manual
carefully before the installation and use.
Always keep these instructions with the
appliance also if you move or sell it.
The users must fully know the opera-
tion and safety functions of the appli-
ance.
Children and vulnerable people safety
Warning! Do not let persons, children
included, with reduced physical
sensory, reduced mental functions or
lack of experience and knowledge to
use the appliance. They must have
supervision or instruction for the
operation of the appliance by a person
who is responsible for their safety.
• Keep all packaging away from children.
There is the risk of suffocation or injury.
• Keep the children away from the appli-
ance during and after the operation, until
the appliance is cold.
Warning! Activate the child safety
device to prevent small children and
pets from an accidental activation of
the appliance.
Safety during operation
• Remove all packaging, stickers and lay-
ers from the appliance before the first
use.
• Set the cooking zones to "off" after each
use.
• The risk of burns! Do not put the objects
made of metal, for example cutlery or
saucepan lids, on the surface that you
cook. They can become hot.
• The Users with an implanted pacemaker
must keep their upper body minimum 30
cm from induction cooking zones that are
activated.
Warning! Fire risk! Too hot fats and
oils can occur with ignition very quickly.
Correct operation
• Always monitor the appliance during op-
eration.
• The appliance is only for domestic use!
• Do not use the appliance as a work or a
storage surface.
• Do not put or keep very flammable liquids
and materials, easy fusible objects (made
of plastic or aluminium) on or near the
appliance.
• Be careful when you connect the appli-
ance to the near sockets. Do not let the
electricity bonds touch the appliance or
hot cookware. Do not let the electricity
bonds to tangle.
How to prevent a damage to the
appliance.
• If the objects or cookware fall on the
glass, the surface can be damaged.
• Cookware made of cast iron, cast alumi-
nium or with damaged bottoms can
cause scratch of the glass. Do not move
them on the surface.
• Do not let cookware boil dry to prevent
the damage to cookware and glass .
• Do not use the cooking zones with empty
cookware or without cookware.
• Do not put the aluminium foil on the ap-
pliance.
• Make sure that the airflow space of 5 mm
between the worktop and front of the unit
below it stays opened.
2 electrolux

Warning! If there is a crack on the
surface, disconnect power supply
to prevent the electrical shock.
INSTALLATION INSTRUCTIONS
Before the installation, note down
the serial number (Ser. Nr.) from the
rating plate.The rating plate of the
appliance is on its lower casing.
EHD60150P 949 594 273 00
58 GAD D5 AU
220-240 V 50-60 Hz
7,4 kW
Induction 7,4 kW
Electrolux
The Safety Instructions
Warning! You must read these!
• Make sure that the appliance is not dam-
aged because of transportation. Do not
connect a damaged appliance. If it is
necessary, speak to the supplier.
• Only an authorized servicing technician
can install, connect or repair this appli-
ance. Use only original spare parts.
• Only use the built-in appliances after you
assemble the appliance into correct built-
in units and work surfaces that align to
the standards.
• Do not change the specifications or
change this product. Risk of injury and
damage to the appliance.
• Fully obey the laws, ordinances, direc-
tives and standards in force in the coun-
try where you use the appliance (safety
regulations, recycling regulations, electri-
cal safety rules etc.)!
• Keep the minimum distances to other ap-
pliances and units!
• Install shock protection, for example in-
stall the drawers only with a protective
floor directly below the appliance!
• Keep safe the cut surfaces of the work-
top from moisture with a correct sealant!
• Seal the appliance to the work top with
no space between with a correct sealant!
• Keep safe the bottom of the appliance
from steam and moisture, e.g. from a
dishwasher or oven!
• Do not install the appliance adjacent to
doors and below windows! If not, when
you open the doors or windows they can
push off hot cookware from the appli-
ance.
Warning! Risk of injury from electrical
current. Carefully obey the instructions
for electrical connections.
• The electrical mains terminal is live.
• Make electrical mains terminal free of
voltage.
• Install correctly to give shock protection.
• Loose and incorrect plug and socket
connections can make the terminal be-
come too hot.
• A qualified electrician must install the
connections in the clamps correctly.
• Use a strain relief clamp on cable.
• Use the correct mains cable of type
H05BB-F Tmax 90°C (or higher) for a sin-
gle phase or two phase connection.
• Replace the damaged mains cable with a
special cable (type H05BB-F Tmax 90°C;
or higher). Speak your local Service Cen-
tre.
The appliance must have the electrical in-
stallation which lets you disconnect the ap-
pliance from the mains at all poles with a
contact opening width of minimum 3 mm.
You must have correct devices to isolate:
line protecting cut-outs, fuses (screw type
fuses removed from the holder), earth leak-
age trips and contactors.
electrolux 3

Assembly
min.
50mm
min.
50mm
min.
500mm
min.
5mm
==
490+1mm 560+1mm
600mm
R 5mm
min.
25 mm
min.
5 mm
min.
20 mm
min.
38 mm
min.
5 mm
If you use a protection box (the addi-
tional accessory), the front airflow
space of 5 mm and protective floor di-
rectly below the appliance are not nec-
essary.
4 electrolux

PRODUCT DESCRIPTION
General overview
210
mm
180
mm
180
mm
145
mm
1 2
45
3
1Induction cooking zone 1800 W, with
Power function 2800 W (minimum
cookware diameter =145mm).
2Induction cooking zone 1800 W, with
Power function 2800 W (minimum
cookware diameter =145mm).
3Induction cooking zone 1400 W, with
Power function 2500 W (minimum
cookware diameter =125mm).
4Control panel
5Induction cooking zone 2300 W, with
Power function 3700 W (minimum
cookware diameter =180mm).
Control panel layout
123456 7
12 10 9811
Use the sensor fields to operate the appliance. The indicators and sounds tell
which functions operate.
sensor field function
1
It activates and deactivates the appliance.
2
It locks/unlocks the control panel.
3
It activates the Power function.
4
Cooking zones' indicators of timer It shows for which cooking zone you set the time.
5
The timer display It shows the time in minutes.
6
A heat setting indicators It shows the heat setting.
7
It shows that:
• there is no cookware on the cooking zone
• the cookware is not correct
• the Automatic Switch Off function operates.
8
It shows that the cooking zone stays hot.
9
A control bar To set the heat setting.
electrolux 5

sensor field function
10
/ It increases or decreases the time.
11
It sets the cooking zone.
12
It activates and deactivates the STOP+GO func-
tion.
+ the number in the timer display
shows that there is a malfunction.
Residual heat indicator
Warning! The risk of burns from
residual heat!
The induction cooking zones make the heat
necessary for cooking directly in the bottom
of the cookware. The glass ceramic is hot
from the heat of the cookware.
OPERATING INSTRUCTIONS
Activation and deactivation
Touch for 1 second to activate or deac-
tivate the appliance.
Automatic Switch Off
The function deactivates the appliance
automatically if:
• All cooking zones are deactivated.
• You do not set the heat setting after you
activate the appliance.
• You spill something or put something on
the control panel for more than 10 sec-
onds, (a pan, a cloth, etc.). The sound
operates some time and the appliance
deactivates. Remove the object or clean
the control panel.
• The appliance become too hot (e.g.
when, a saucepan boils dry). Before you
use the hob again, the cooking zone
must be cool.
• You use not correct cookware. The sym-
bol comes on and the cooking zone
deactivates automatically after 2 minutes.
• You do not deactivate a cooking zone or
change the heat setting. After some time,
comes on and the appliance deacti-
vates. See the table.
The times of Automatic Switch Off
Heat setting 1 - 2 3 - 4 56 - 9
The cooking
zone deacti-
vates after
6 hours 5 hours 4 hours 1.5 hours
The heat setting
Touch the control bar at the heat setting.
The heat setting indicators come on.
6 electrolux

Automatic Heat Up
1
2
3
4
5
6
7
8
9
10
11
0
123456789
You can get a necessary heat setting in a
shorter time if you activate the Automatic
Heat Up function. This function sets the
highest heat setting for some time (see the
illustration), and then decreases to the nec-
essary heat setting.
To start the Automatic Heat Up function for
a cooking zone:
1. Touch (the indicator comes on).
2. Immediately touch the necessary heat
setting.
To stop the function change the heat set-
ting.
Power function
The Power function makes more power
available to the induction cooking zones.
The Power function is activated for 10 mi-
nutes at most. After, that the induction
cooking zone automatically sets back to
highest heat setting . To activate, touch ,
the indicator comes on. To deactivate,
change the heat setting.
Power management
The power management divides the power
between two cooking zones in a pair (see
the illustration). The power function increa-
ses the power to the maximum level for one
cooking zone in the pair. Automatically de-
creases the power in the second cooking
zone to a lower level. The display for the re-
duced zone change between two levels.
Timer
Count Down Timer
Use the Count Down Timer to set how long
the cooking zone operates for only this one
time.
Set the Count Down Timer after the se-
lection of the cooking zone.
You can set the heat setting before or after
you set the timer.
•To set the cooking zone:touch
again and again until the indicator of a
necessary cooking zone comes on.
•To activate the Count Down Timer:
touch of the timer to set the time (
00
-
99
minutes). When the indicator of the
cooking zone start to flash slow, the time
counts down.
•To see the remaining time: set the
cooking zone with . The indicator of
the cooking zone starts to quickly. The
display shows the remaining time.
•To change the Count Down Timer:set
the cooking zone with touch or .
•To deactivate the timer: set the cook-
ing zone with . Touch . The remain-
ing time counts back to
00
. The indica-
tor of the cooking zone goes out. To de-
activate you can also touch and at
the same time.
electrolux 7

When the countdown comes to an end,
the sound operates and
00
flashes. The
cooking zone deactivates.
•To stop the sound: touch
CountUp Timer ( The count up timer)
Use the CountUp Timer to monitor how
long the cooking zone operates.
•To set the cooking zone (if more than
1 cooking zone operate):touch
again and again until the indicator of a
necessary cooking zone comes on.
•To activate the CountUp Timer:touch
of the timer comes on. When the
indicator of the cooking zone starts to
flash slow, the time counts up. The dis-
play switches between and counted
time (minutes).
•To see how long the cooking zone
operates: set the cooking zone with .
The indicator of the cooking zone starts
to flash quickly. The display shows the
time that the cooking zone operates.
•To deactivate the CountUp Timer: set
the cooking zone with and touch
or to deactivate the timer. The indica-
tor of the cooking zone goes out.
Minute Minder
You can use the timer as a Minute Minder
while the cooking zones do not operate.
Touch . Touch or of the timer to
set the time. When the time comes to an
end, the sound operates and
00
flashes.
•To stop the sound: touch
STOP+GO
The function sets all cooking zones that
operate to the lowest heat setting.
When operates, you cannot change the
heat setting.
The function does not stop the timer
function.
•To activate this function touch . The
indicator comes on.
•To deactivate this function touch .
The heat setting that you set before
comes on.
Lock
When the cooking zones operate, you can
lock the control panel, but not . It pre-
vents an accidental change of the heat set-
ting.
First set the heat settings.
To activate this function touch . The indi-
cator comes on.
The Timer stays on.
To deactivate this function touch . The
indicator goes out.
When you deactivate the appliance, you al-
so deactivate this function.
The child safety device
This function prevents an accidental opera-
tion of the appliance.
To activate the child safety device
•Activate the appliance with . Do not
set the heat settings.
•Touch for 4 seconds. The indicator
comes on.
•Deactivate the appliance with .
To deactivate the child safety device
•Activate the appliance with . Do not
set the heat settings. Touch for 4
seconds. The indicator goes out.
•Deactivate the appliance with .
To override the child safety device for
only one cooking time
•Activate the appliance with . The indi-
cator comes on.
•Touch for 4 seconds. Set the heat
setting in 10 seconds. You can operate
the appliance.
• When you deactivate the appliance with
, the child safety device operates
again.
OffSound Control (Deactivation and
activation of the sounds)
Deactivation of the sounds
Deactivate the appliance.
Touch for 3 seconds. The displays come
on and go out. Touch for 3 seconds.
comes on, the sound is on. Touch ,
comes on, the sound is off.
When this function operates, you can hear
the sounds only when:
•you touch
• the Minute Minder comes down
• the Count Down Timer comes down
• you put something on the control panel.
8 electrolux

Activation of the sounds
Deactivate the appliance.
Touch for 3 seconds. The displays come
on and go out. Touch for 3 seconds.
comes on, because the sound is off. Touch
, comes on. The sound is on.
HELPFUL HINTS AND TIPS
Use the induction cooking zones with
correct cookware.
Cookware for induction cooking zones
Important! For induction cooking zones a
strong electro-magnetic field creates the
heat in the cookware very quickly.
Cookware material
•correct: cast iron, steel, enamelled steel,
stainless steel, the bottom made of multi-
layer (with correct mark from a manufac-
turer).
•not correct: aluminium, copper, brass,
glass, ceramic, porcelain.
Cookware is correct for an induction
hob if …
• ... some water boils very quickly on a
zone set to the highest heat setting..
• ... a magnet pulls on to the bottom of the
cookware.
The bottom of the cookwar must be
as thick and flat as possible.
Cookware dimensions: induction
cooking zones adapt to the dimension
of the bottom of the cookware auto-
matically to some limit.
The noises during operation
If you can hear
• crack noise: cookware is made of differ-
ent materials (Sandwich construction).
• whistle sound: you use one or more
cooking zones with high power levels and
the cookware is made of different materi-
als (Sandwich construction).
• humming: you use high power levels.
• clicking: electric switching occurs.
• hissing, buzzing: the fan operates.
The noises are normal and do not refer
to appliance malfunction.
Energy saving
• If it is possible, always put the lids on
the cookware.
•Putcookwareona cooking zone be-
fore you start it.
Öko Timer (Eco Timer)
To save the energy, the heater of the
cooking zone deactivates before the
count down timer signal. The difference
in the operation time is depends of the
heat setting level and the time you
cook.
The Examples of cooking applications
The data in the table is for guidance only.
Heat
set-
ting
Use to: Time Hints
1Keep warm the food you cooked as re-
quired
Put a lid on a cookware
1-2 Hollandaise sauce, melt: butter, choco-
late, gelatine
5-25
min
Mix from time to time
1-2 Solidify: fluffy omelettes, baked eggs 10-40
min
Cook with a lid on
2-3 Simmer rice and milkbased dishes,
heating up ready-cooked meals
25-50
min
Add the minimum twice as much
liquid as rice, mix milk dishes part
procedure through
electrolux 9

Heat
set-
ting
Use to: Time Hints
3-4 Steam vegetables, fish, meat 20-45
min
Add some tablespoons of liquid
4-5 Steam potatoes 20-60
min
Use max. ¼ l water for 750 g of po-
tatoes
4-5 Cook larger quantities of food, stews
and soups
60-150
min
Up to 3 l liquid plus ingredients
6-7 Gentle fry: escalope, veal cordon bleu,
cutlets, rissoles, sausages, liver, roux,
eggs, pancakes, doughnuts
as nec-
essary
Turn halfway through
7-8 Heavy fry, hash browns, loin steaks,
steaks
5-15
min
Turn halfway through
9Boil large quantities of water, cook pasta, sear meat (goulash, pot roast), deep-fry chips
The Power function is best to heat up large
quantities of water.
Information on acrylamides
Important! According to the newest
scientific knowledge, if you brown food
(specially the one which contains starch),
acrylamides can pose a health risk. Thus,
we recommend that you cook at the lowest
temperatures and do not brown food too
much.
CARE AND CLEANING
Clean the appliance after each use.
Always use cookware with clean bottom.
Warning! The sharp objects and
abrasive cleaning agents can cause
damage to the appliance.
For your safety, do not clean the appli-
ance with steam cleaners or high-pres-
sure cleaners.
Scratches or dark stains on the glass-
ceramic cause no effect on how the
appliance operates.
To remove the dirt:
1. – Remove immediately:melted plas-
tic, plastic foil, and food with sugar. If
not, the dirt can cause damage to the
appliance. Use a special scraper for
the glass . Put the scraper on the
glass surface at an acute angle and
move the blade on the surface .
–Remove after the appliance is suf-
ficiently cool:limescale rings , water
rings, fat stains, shiny metallic discol-
orations. Use a special cleaning agent
for glass ceramic or stainless steel.
2. Clean the appliance with a moist cloth
and some detergent.
3. At the end rub the appliance dry with
a clean cloth.
WHAT TO DO IF…
Problem Possible cause and remedy
You cannot activate the appli-
ance or operate it.
• Activate the appliance again and set the heat setting in 10 sec-
onds.
• You touched 2 or more sensor fields at the same time. Only
touch one sensor field.
• The Child Safety Device or the Lock or Stop+Go operates. See
the chapter Operating instructions.
• There is water or fat stains on the control panel. Clean the con-
trol panel.
10 electrolux

Problem Possible cause and remedy
A Sound operates and the ap-
pliance deactivates.
A sound operates when the ap-
pliance is deactivated.
You put something on one or more sensor fields. Remove the ob-
ject from the sensor fields.
The appliance deactivates. You put something on the . Remove the object from the sen-
sor field.
The residual heat indicator
does not come on.
The cooking zone is not hot because it operated only for a short
time. If the cooking zone should be hot, speak to the service cen-
tre.
The Automatic Heat Up func-
tion does not operate.
• There is still residual heat on the cooking zone. Let the cooking
zone become sufficiently cool.
• The highest heat setting is set. The highest heat setting has the
same power as the Automatic Heat Up function.
The heat setting changes be-
tween two levels.
The Power management is activated. See the section Power
management.
The sensor fields become hot. The cookware is too large or you out it too near to the controls.
Put large cookware on the rear cooking zones if it is necessary.
There is no signal when you
touch the panel sensor fields.
The signals are deactivated. Activate the signals (see OffSound
Control).
comes on The Automatic Switch Off operates. Deactivate the appliance and
activate it again.
comes on • No cookware on the cooking zone. Put cookware on the cook-
ing zone.
• Not correct cookware. Use the correct cookware.
• The diameter of the bottom of the cookware is too small for the
cooking zone. Move cookware to a smaller cooking zone.
and number comes on. There is an error in the appliance.
Disconnect the appliance from the electrical supply for some
time. Disconnect the fuse from the electrical system of the house.
Connect again. If comes on again, speak to the service cen-
tre.
comes on There is an error in the appliance, because a cookware boils dry.
The protection against become too hot for the cooking zone op-
erates. The Automatic Switch Off operates.
Deactivate the appliance. Remove the hot cookware. After, ap-
proximately 30 seconds activate the cooking zone again.
should go out of the display, residual heat indicator can stay. Let
the cookware become sufficiently cool and check it with the sec-
tion Cookware for the induction cooking zone.
If you tried the above solutions and cannot
repair the problem, speak to your dealer or
the customer service. Give the data from
the rating plate, three digit letter, code for
the glass ceramic (it is in the corner of the
glass surface) and an error message that
comes on.
Make sure, you operated the appliance cor-
rectly. If not the servicing by a customer
service technician or dealer will not be free
of charge, also during the warranty period.
The instructions about the customer service
and conditions of guarantee are in the guar-
antee booklet.
electrolux 11

ENVIRONMENT CONCERNS
The symbol on the product or on its
packaging indicates that this product may
not be treated as household waste. Instead
it should be taken to the appropriate
collection point for the recycling of electrical
and electronic equipment. By ensuring this
product is disposed of correctly, you will
help prevent potential negative
consequences for the environment and
human health, which could otherwise be
caused by inappropriate waste handling of
this product. For more detailed information
about recycling of this product, please
contact your local council, your household
waste disposal service or the shop where
you purchased the product.
Packaging material
The packaging materials are friendly to
the environment and can be recycled.
The plastic components are identified
by marking: >PE<,>PS<, etc. Discard
the packaging materials as household
waste at the waste disposal facilities in
your municipality.
12 electrolux

electrolux 13

14 electrolux

electrolux 15

892934386-A-482010
www.electrolux.com/shop