Electrolux EHED 63 CS User manual

Ceramic glass induction hob
EHED 63 CS

Electrolux. Thinking of you.
Share more of our thinking at www.electrolux.com
Contents
Safety instructions 2
Description of the appliance 3
Operating the appliance 5
Tips on cooking and frying 10
Cleaning and care 11
21...fiodottahW
41atadlacinhce
T
41lasopsi D
Installation Instructions 14
61ylbmessA
71ytnarraW
ecitontuohtiwegnahcottcejbuS
Safety instructions
Warning! Please comply with these
instructions. If you do not, any damage
resulting is not covered by the warranty.
Correct use
UThis appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities, or
lack of experience and knowledge, unless
they have been given supervision or in-
struction concerning use of the appliance
by a person responsible for their safety.
UDo not leave the appliance unattended
during operation.
UThis appliance should be used only for
normal domestic cooking and frying of
food.
UThe appliance must not be used as a work
surface or as a storage surface.
UAdditions or modifications to the appliance
are not permitted.
UDo not place or store flammable liquids,
highly inflammable materials or fusible ob-
jects (e.g. plastic film, plastic, aluminium)
on or near the appliance.
Children's safety
UChildren should be supervised to ensure
that they do not play with the appliance.
UTo avoid small children and pets uninten-
tionally switching the appliance on, we rec-
ommend activation of the child safety de-
vice.
Warning! Accessible parts will become
hot during use. To avoid burns young
children should be kept away
General Safety
UThe appliance may only be installed and
connected by a qualified electrician.
UBuilt-in appliances may only be used after
they have been built into suitable built-in
units and work surfaces that meet stand-
ards.
UIn the event of faults with the appliance or
damage to the glass ceramic (cracks,
scratches or splits), the appliance must be
switched off and disconnected from the
electrical supply, to prevent the possibility
of an electric shock.
URepairs to the appliance must only be car-
ried out by trained registered service engi-
neers.
UThis appliance is not intended to be oper-
ated by means of an external timer or sep-
arate remote control system.
Safety during use
URemove stickers and film from the glass
ceramic.
UThere is the risk of burns from the appli-
ance if used carelessly.
UCables from electrical appliances must not
touch the hot surface of the appliance or
hot cookware.
UOverheated fats and oils can ignite very
quickly. Warning! Fire hazard!
USwitch the cooking zones off after each
use, do not rely on the pan detector.
UUsers with implanted pacemakers should
keep their upper body at least 30 cm from
induction cooking zones that are switched
on.
2 electrolux

URisk of burns! Do not place objects made
of metal, such as knives, forks, spoons
and saucepan lids on the cooking surface,
as they can get hot
Safety when cleaning
UFor cleaning, the appliance must be
switched off and cooled down.
UFor safety reasons, the cleaning of the ap-
pliance with steam jet or high pressure
cleaning equipment is not permitted.
How to avoid damage to the appliance
UThe glass ceramic can be damaged by
objects falling onto it.
UThe edge of the glass ceramic can be
damaged by being knocked by the cook-
ware.
UCookware made of cast iron, cast alumi-
nium or with damaged bottoms can
scratch the glass ceramic if pushed across
the surface.
USpillage from cookware can burn onto the
glass ceramic and should be removed
straight away.
UDo not use the cooking zones with empty
cookware or without cookware.
UTo avoid damaging cookware and glass
ceramics, do not allow saucepans or frying
pans to boil dry.
UThe Ventilation gap of 5 mm between the
worktop and front of the unit underneath it
must not be covered.
Description of the appliance
Cooking surface layout
180 mm
145 mm
210 mm
145 mm
1 2
3
45
1Induction cooking zone 1400 W, with
power function 1800 W
2Induction cooking zone 1800 W, with
power function 2800 W
3Induction cooking zone 1400 W, with
power function 1800 W
4Control panel
5Induction cooking zone 2300 W, with
power function 3100 W
3description of the appliance electrolux

Control panel layout
1
8 7 6
2 3 4 5
1Power function
2Display
3Cooking zone indicators. Timer function
4Timer display
5Heat setting selection
6Timer
7Lock
8On/Off with indicator
Touch Control sensor fields
The appliance is operated using Touch Con-
trol sensor fields. Functions are controlled by
touching sensor fields and confirmed by dis-
plays and acoustic signals. Only touch the
sensor fields which activate a desired func-
tion. Do not cover other sensor fields.
If the control bar is touched for longer
than 6 seconds, a signal sounds and the
appliance switches itself off.
Sensor field Function
On / Off Switches appliance on and off
Increase settings To increase heat setting
Decrease settings To decrease heat setting
Timer Timer selection
Increase settings To increase Timer time
Reduce settings To reduce Timer time
Lock Locking/unlocking the control panel
Power Switch the power function on and off
Displays
Display Description
The cooking zone is switched off
Keep Warm settings Keep Warm / STOP+GO function is switched on
- Heat settings To set heat settings
Auto Warm-up The Auto Warm-up function is switched on
Fault Malfunction has occurred
4 electrolux description of the appliance

Display Description
Pan detection Cookware is unsuitable or too small or no cookware
has been placed on the cooking zone
Residual heat Cooking zone is still hot
Child safety device Lock/Child safety device is set
Power Power function is switched on
Automatic Switch off Switch off is active
Residual heat indicator
Warning! Risk of burns from residual
heat. After being switched off, the
cooking zones need some time to cool
down. Look at the residual heat indicator
.
Residual heat can be used for melting
and keeping food warm.
The induction cooking zones create the
heat required for cooking directly in the base
of the cookware. The glass ceramic is merely
heated by the residual heat of the cookware.
Operating the appliance
Use the induction cooking zones with
suitable cookware.
Switching the appliance on and off
Control panel Display Pilot light
Switch on Touch for 2 seconds
/
lights up
Switch off Touch for 1 second
/ none goes out
After switching on, within approx. 10
seconds a heat setting or a function
must be set, otherwise the appliance au-
tomatically switches itself off.
Setting the heat setting
Control panel Display
Increase Touch to /
Decrease Touch to
Switch off Touch and at the same time
The keep warm setting lies between
and
. It is used to keep food warm.
Using the automatic warm-up function
All cooking zones are equipped with an au-
tomatic warm-up function. The automatic
warm-up function sets the cooking zone to
the highest setting for a certain period of time
and then automatically switches back to the
cooking setting that was originally set.
Step Control panel Display
1. Setting the maximum setting
/
2. Place to one side for a moment /
3. Touch
operating the appliance electrolux 5

Step Control panel Display
4. Touch in order to set the desired cooking setting Until
/ after 3
seconds
If during the automatic warm up a
higher heat setting is selected, e.g. from
to , the automatic warm up is ad-
justed.
The length of time that the automatic warm
up function operates depends on the heat
setting selected.
Heat setting Length of the automatic warm up [min:sec]
0:10
0:10
0:10
3:10
5:50
10:10
2:00
2:30
2:50
---
Locking/unlocking the control panel
The control panel, with the exception of the
“On/Off” sensor field, can be locked at any
time in order to prevent the settings being
changed e.g. by wiping over the panel with a
cloth.
Control panel Display
Switch on Touch
(for 5 seconds)
Switch off Touch previously set heat setting
When you switch the appliance off, the
locking function is automatically switch-
ed off.
Using the child safety device
The child safety device prevents unintention-
al use of the appliance.
Switching on the child safety device
Step Control panel Display/Signal
1. Switch on the appliance. Do not set a heat set-
ting.
2. Touch for 4 seconds
The child safety device is switched on.
Overriding the child safety device
The child safety device can be switched off
in this way for a single cooking session; it re-
mains activated afterwards.
Step Control panel Pilot light
1. Switch on the appliance.
2. Touch for 4 seconds lights up
6 electrolux operating the appliance

Step Control panel Pilot light
Until the appliance is next switched off, it can used as normal.
After overriding the child safety device, a heat setting or a function must be set within
approx. 10 seconds, otherwise the appliance automatically switches itself off.
Switching off the child safety device
Step Control panel Pilot light
1. Switch on the appliance. Do not set a heat set-
ting.
2. Touch for 4 seconds lights up
3. Switch appliance off.
The child safety device is switched off.
Switching the power function on and off
The power function
makes additional
power available to the induction cooking
zones, e.g. to bring a large volume of water
to the boil. The power function is activated
for 5-8 minutes. After this time, the induction
cooking zones automatically return to cook-
ing level
.
Control panel Display
Switch on Touch
Switch off Touch
Touch
If the power function has ended, the
cooking zones automatically switch
back to the heat setting set previously.
Power Management
The cooking zones of the cooking surface
have a maximum power.
The maximum power is reached when the
heat setting 9 has been set for all cooking
zones. Two cooking zones generate a pair
(see figure) and therefore, the power man-
agement shares the maximum available
power between these cooking zones.
When the power function is selected for one
cooking zone, the power management
makes the additional power for this cooking
zone available by reducing the power of the
corresponding other cooking zone.
Example: the heat setting 9 is selected on
one cooking zone. The power function is
switched on for the corresponding cooking
zone. The power function is carried out but
the heat setting 9 of one of the cooking zones
and the power function for the other cooking
zone of the pair exceed the maximum power
for both at the same time. For this purpose,
the power management reduces the power
of the cooking zone that switched on first
from 9 to example 5 and the display of this
cooking zone changes between 9 and 5 and
then stays at the current possible maximum
5. (If the display changes between 9 and 5 or
9 and 3 or another value depends on the type
of appliance and the size of the cooking
zone.).
operating the appliance electrolux 7

Using the timer
All cooking zones can use one of the two
timer functions at the same time.
Function Condition Outcome after the time has
elapsed
Automatic cut-out a heat setting is set acoustic signal 00 flashes Cooking
zone switches off
Countdown timer cooking zones not in use acoustic signal 00 flashes
If a cooking zone is switched off, the tim-
er function set is also switched off.
If a heat setting is set on this cooking
zone in addition to a countdown timer,
the cooking zone is switched off after the
time set has elapsed.
Selecting a cooking zone
Ste
p
Control panel Display
1. Touch once Pilot light of the first cooking zone flashes
2. Touch once Pilot light of the second cooking zone flashes
3. Touch once Pilot light of the third cooking zone flashes
4. Touch once Pilot light of the fourth cooking zone flashes
The heat setting indicator of the selected
cooking zone goes out, as long as the
timer time can be set.
If the pilot light is flashing more slowly,
the heat setting indicator appears again
and the heat setting can be re-set or
modified.
If other timer functions are set, after a
few seconds the shortest remaining time
of all the timer functions is displayed and
the corresponding pilot light flashes.
Setting time
Step Control panel Grill seting
1. Select a cooking zone. Telltale of cooking zone selected flashes
2. Touch or
from the selected cooking
zone
0
1to 99
electrolux operating the appliance
minutes
After a few seconds the power indicator flashes more slowly.
The time is set.
The time counts down.
Switching off the Timer function
Step Control panel Display
1. Select a cooking zone. Pilot light of the selected cooking zone
flashes more quickly. Remaining time is dis-
played
8

Step Control panel Display
2. Touch for the cooking zone selected The remaining time counts down to 00 .
Simultaneously Touch and
from the
selected cooking zone
00 is displayed.
The pilot light goes out.
The Timer function for the selected cooking zone is switched off.
Changing the time
Step Control panel field Display
1.
Select a cooking zone. Pilot light of the cooking zone selected flashes
faster The time remaining is displayed
2. Touch or
for the cooking zone se-
lected
0
1to 99 minutes
After a few seconds the pilot light flashes more slowly.
The time is set.
The time counts down.
Displaying the time remaining for a cooking zone
Step Control panel field Display
1. Select cooking zone Pilot light of the cooking zone selected flashes
faster The time remaining is displayed
After a few seconds the pilot light flashes more slowly.
Switching off the acoustic signal
Step Control panel field Acoustic signal
1. Touch Acoustic signal to acknowledge.
Acoustic signal stops.
Automatic switch off
Cooking surface
UIf after switching on the cooking surface, a
heat setting is not set for a cooking zone
within approx. 10 seconds, the cooking
surface automatically switches itself off.
UIf one or more sensor fields are covered by
objects (a pan, cloths, etc.) for longer than
approx. 10 seconds, a signal sounds and
the cooking surface switches off automat-
ically.
UIf all cooking zones are switched off, the
cooking surface automatically switches it-
self off after approx. 10 seconds.
Control panel
When the appliance is switched off, if one or
more of the sensor fields on the control panel
are covered for more that 10 seconds, an
acoustic signal sounds. The acoustic signal
switches itself off automatically when the
sensor fields are no longer covered.
Induction cooking zones
U
In the event of overheating (e.g. when a
pan boils dry) the cooking zone automati-
cally switches itself off. is displayed. Be-
fore being used again, the cooking zone
must be set to 0 and allowed to cool down.
UIf cookware that is not suitable is used,
lights up in the display and after 2 mi-
nutes the indicator for the cooking zone
switches itself off.
UIf one of the cooking zones is not switched
off after a certain time, or if the heat setting
is not modified, the relevant cooking zone
switches off automatically.
is displayed.
Before being used again, the cooking zone
must be set to 0.
9operating the appliance electrolux

Heat setting Switches off after
, - 6 hours
- 5 hours
4 hours
- 1.5 hours
Tips on cooking and frying
Information about acrylamides
According to the latest scientific re-
search, intensive browning of food, es-
pecially in products containing starch,
may present a health risk due to acryla-
mide. Therefore we recommend cook-
ing at low temperatures and not brown-
ing foods too much.
Cookware for induction cooking zones
Cookware material Suitable
Steel, enamelled steel +
Cast iron +
Stainless steel +*
Cookware bottom of multilayer +*
Aluminium, copper, brass -
Glass, ceramic, porcelain -
* Cookware for induction cooking zones is
labelled as suitable by the manufacturer.
Suitability test
Cookware is suitable for induction cooking, if
…
U... a little water on an induction cooking
zone set to the highest heat setting is heat-
ed within a short time.
U... a magnet sticks to the bottom of the
cookware.
Certain cookware can make noises
when being used on induction cooking
zones. These noises are not a fault in the
appliance and do not affect operation in
any way.
Bottom of the cookware
The bottom of the cookware should be as
thick and level as possible.
Pan size
Induction cooking zones adapt automatically
to the size of the bottom of the cookware up
to a certain point. However the magnetic part
of the bottom of the cookware must have a
minimum diameter depending on the size of
the cooking zone.
Diameter of cooking
zone [mm]
Minimum diameter
of dish base [mm]
210 180
180 145
145 120
The cookware must be placed centrally
on the cooking zone.
Tips on energy saving
Place cookware on the cooking zone
before it is switched on.
If possible, always place a lid on the
cookware.
Examples of cooking applications
The information given in the following table is
for guidance only.
10 electrolux tips on cooking and frying

Heat
setting
Cooking proc-
ess
suitable for Cook time Tips/Hints
0 Off position
1
Keeping food
warm
Keeping cooked foods
warm
as required Cover
1-2 Melting Hollandaise sauce, melt-
ing butter, chocolate,
gelatine
5-25 mins.
Stir occasionally
1 - 2 Solidifying Fluffy omelettes, baked
eggs
10-40 mins. Cook with lid on
2-3 Simmering on low
heat
Simmering rice and milk-
based dishes
Heating up ready-
cooked meals
25-50 mins. Add at least twice as
much liquid as rice, stir
milk dishes part way
through cooking
3-4 Steaming
Braising
Steaming vegetables,
fish
Braising meat
20-45 mins. With vegetables add
only a little liquid (a few
tablespoons)
4-5 Boiling Steaming potatoes 20-60 mins. Use only a little liquid, e.
g.: max. ¼ l water for
750 g of potatoes
4-5 Boiling Cooking larger quanti-
ties of food, stews and
soups
60-150 mins. Up to 3 l liquid plus in-
gredients
6-7 Gentle frying
Frying escalope, veal
cordon bleu, cutlets, ris-
soles, sausages, liver,
roux, eggs, pancakes,
doughnuts
Steady frying Turn halfway through
cooking
7-8 Heavy frying Hash browns, loin
steaks, steaks, Flädle
(pancakes for garnishing
soup)
5-15 mins. per
pan
Turn halfway through
cooking
9 Boiling Searing
Deep frying
Boiling large quantities of water, cooking pasta, searing meat (gou-
lash, pot roast), deep frying chips
The power function is suitable for heating
large quantities of liquid.
Cleaning and care
Warning! Sharp objects and abrasive
cleaning agents can damage the
appliance by scratching the glass
surface, which may result in shattering of
glass. Clean the appliance and remove
the residues with water and washing up
liquid after each use. Remove also
remnants of cleaning agents!
Scratches or dark stains on the glass
ceramic that cannot be removed do not
affect the functioning of the appliance.
Cleaning the appliance after each use
1. Food containing sugar, plastics, tin foil
residues should be removed at once us-
ing a scraper. Place a scraper on the
glass ceramic surface at an angle and re-
move residues by sliding the blade over
11cleaning and care electrolux

the surface. Wipe the appliance with a
damp cloth and a little washing up liquid.
Finally, rub the appliance dry using a
clean cloth .
2. Limescale rings, water rings, fat
splashes, shiny metallic discolorations
should be removed after the appliance
has cooled down using cleaner for glass
ceramic or stainless steel.
Warning! Do not use a steam cleaner to
clean this appliance.
What to do if ...
Problem Possible cause Remedy
The appliance cannot be switch-
ed on or is not operating
More than 10 seconds have
passed since the appliance was
switched on
Switch the appliance on again.
The lock is switched on
Switch off the lock (See the sec-
tion “Locking/unlocking the con-
trol panel”)
The child safety device is switch-
ed on
Deactivate child safety device
(See the section “Child safety
device”)
Several sensor fields were
touched at the same time
Only touch one sensor field
Automatic switch off has been
triggered
Remove any objects (pan,
cloths, etc.) that are lying on the
control panel. Switch the appli-
ance on again
The residual heat indicator is not
displaying anything
The cooking zone was only on
for a short time and is therefore
not hot
If the cooking zone is supposed
to be hot, call the Customer
Service Department.
The automatic warm up function
is not switching itself on
There is still residual heat on the
cooking zone
Let the cooking zone cool down
The highest heat setting is set The highest heat setting has the
same power as the automatic
warm up function
Repeated acoustic signal (6x),
appliance switches off
One or more sensor fields have
been covered for longer than 10
seconds
Uncover sensor field
Acoustic signal sounds when
appliance is switched off
The control panel is wholly or
partly covered by objects.
Remove objects.
Acoustic signal sounds and ap-
pliance switches itself on and
then off again; after 5 seconds
another acoustic signal sounds
The On/Off sensor field has
been covered up, e.g. by a cloth
Do not place any objects on the
control panel
Display is switching between
two heat settings
Power management is reducing
the power of this cooking zone
See the section “Switching the
power function on and off”
lights up Unsuitable cookware Use suitable cookware
No cookware on the cooking
zone
Place cookware on the cooking
zone
The diameter of the bottom of
the cookware is too small for the
cooking zone
Move onto a smaller cooking
zone
12 electrolux what to do if...

Problem Possible cause Remedy
Use suitable cookware
is lit Overheating protection for the
cooking zone has been trig-
gered
Switch off the cooking zone.
Switch the cooking zone on
again
Automatic switch off has been
triggered
Switch off the cooking zone.
Switch the cooking zone on
again
and number are displayed Electronics fault Disconnect the appliance from
the electrical supply for a few mi-
nutes (Take the fuse out of the
house’s wiring system) If after
switching on again, is dis-
played again, call the customer
service department
If you are unable to remedy the problem
by following the above suggestions,
please contact your dealer or the Cus-
tomer Care Department.
Warning! Repairs to the appliance are
only to be carried out by qualified service
engineers. Considerable danger to the
user may result from improper repairs.
If the appliance has been wrongly oper-
ated, the visit from the customer service
technician or dealer may not take place
free of charge, even during the warranty
period.
Operating noises
Depending on the material and the process-
ing of the base, the following noises may oc-
cur when using induction cooking zones.
U
Cracking noise 1
1
3
2
when using cookware made of different
materials (Sandwich construction)
U
Whistling 1
when using an individual cooking zone or
several cooking zones with high powers
when the cookware is made of different
materials (Sandwich construction)
U
Humming 2
can occur at high power levels
U
Clicking 2
during electric switching processes
U
Hissing, buzzing 3
The device is fitted with a fan for cooling
the electrics. A whiring noise can be heard
when operating the fan which may deviate
depending on the performance and may
continue for a while after the appliance is
switched off.
The noises described are normal and do
not refer to any defects.
13what to do if... electrolux

Technical data
Model EHED 63 CS
Product dimensions
(w x d) mm 610 x 515
Cut-out dimensions
(w x d) mm 560 x 490
Voltage (volts) 220 - 240
Cycles (Hz) 50
Service Cord included, not fitted
elements no. zones watts
left front 1 2300/3100
left rear 1 1400/1800
right front 1 1400/1800
right rear 1 1800/2800
total 7400
Disposal
The symbol
on the product or on its
packaging indicates that this product may
not be treated as household waste. Instead
it should be taken to the appropriate
collection point for the recycling of electrical
and electronic equipment. By ensuring this
product is disposed of correctly, you will help
prevent potential negative consequences for
the environment and human health, which
could otherwise be caused by inappropriate
waste handling of this product. For more
detailed information about recycling of this
product, please contact your local council,
your household waste disposal service or the
shop where you purchased the product.
Packaging material
The packaging materials are environ-
mentally friendly and can be recycled.
The plastic components are identified by
markings, e.g. >PE<, >PS<, etc. Please
dispose of the packaging materials in the
appropriate container at your local
waste disposal facilities.
Installation Instructions
Warning! Safety instructions
Warning! This must be read! The laws,
ordinances, directives and standards in
force in the country of use are to be
followed (safety regulations, proper
recycling in accordance with the
regulations, etc.)
Important! Installation may only be carried
out by a qualified electrician.
The minimum distances to other appliances
and units are to be observed.
Anti-shock protection must be provided by
the installation, for example drawers may on-
ly be installed with a protective floor directly
underneath the appliance.
The cut surfaces of the worktop are to be
protected against moisture using a suitable
sealant. The sealant seals the appliance to
the work top with no gap. Do not use silicon
sealant between the appliance and the work
top.
Avoid installing the appliance next to doors
and under windows. Otherwise hot cook-
14 electrolux technical data / disposal / installation instructions

ware may be knocked off the rings when
doors and windows are opened.
Caution! Warning! Risk of injury
from electrical current.
UThe electrical mains terminal is live.
UMake electrical mains terminal free of volt-
age.
UFollow connection schematic.
UObserve electrical safety rules.
UEnsure anti-shock protection by installing
correctly.
UThe appliance must be connected to the
electrical supply by a qualified electrician.
ULoose and inappropriate plug and socket
connections can make the terminal over-
heat.
UHave the clamping connections correctly
installed by a qualified electrician.
UUse strain relief clamp on cable.
UA ventilation gap of 5 mm underneath the
cooktop must be left.
Caution! The surface temperature
exceeds 95°C. To avoid a hazard,
underbench access must be restric-
ted
Electrical Connection
Before connecting, check that the nominal
voltage of the appliance, that is the voltage
stated on the rating plate, corresponds to the
available supply voltage. Also check the
power rating of the appliance and ensure that
the wire is suitably sized in accordance with
local wiring rules to suit the appliance power
rating. The rating plate is located on the lower
casing of the hob. The heating element volt-
age is AC230V~. The appliance also works
perfectly on networks with AC220V~ or
AC240V~. Means for disconnection must be
incorporated in the fixed wiring in accord-
ance with local wiring rules.The hob is to be
connected to the mains using a device that
allows the appliance to be disconnected
from the mains at all poles with a contact
opening width of at least 3 mm, eg. auto-
matic line protecting cut-out, earth leakage
trips or fuse. If this appliance’s mains cable
is damaged, it must be replaced by a special
cable (type H05BB-F Tmax 90°C; or higher).
The latter is available from the Customer
Care Department. The connection must be
carried out as shown in the diagram. The
connecting links should be fitted according
to the connection diagram sticker on the
back of the appliance. Note for single phase
connection the link supplied in the terminal
box needs to be fitted between terminals 1
and 2. The earth lead is connected to termi-
nal
. The earth lead must be longer than
leads carrying electric current. The cable
connections must be made in accord-
ance with regulations and the terminal
screws tightened securely. Finally, the
connecting cable is to be secured with the
mains cable cleat and the covering closed by
pressing firmly (lock into place). Before
switching on for the first time, any protective
foil or stickers must be removed from the
glass ceramic surface.
Warning! Once connected to the
mains supply check that all cooking
zones are ready for use by briefly
switching each on in turn at the
maximum setting.
UA duplicate rating label is supplied
with this unit. For easy identification of
this unit after installation, stick it to a
readily available surface adjacent to
the cooktop.
Sticking on the seal
UClean the worktop around the cutout area.
UStick the single-sided adhesive sealing
tape provided on the underside of the hob
around the outside edge ensuring that it is
not stretched. The two ends of the tape
should join in the middle of one side. After
trimming the tape (allow it to overlap by 2-3
mm), press the two ends together.
15installation instructions electrolux

Assembly
12
min. 38
min. 5
min. 25
min. 5
min. 20
Warning! Surface temperatures of
base exceed 95°C, under bench
access must be restricted by use of
non-combustible barrier on
installation
16 electrolux assembly

17warranty electrolux

18 electrolux warranty

ehed63cs.pmd 14/1/2553, 10:592

ehed63cs.pmd 14/1/2553, 10:593