Electrolux E7SI1-82LG User manual

3485 E 02 01 1119
Instruction book
Mode d’emploi
Refine 700 Steam iron
E7SI1-82LG
For more information visit
electrolux.com
E N STEAM IRON
F R FER À REPASSER
AR  

2www.electrolux.com
Outdoor Special
setting
Special
setting
Cotton
Wool
Linen
Delicate
A
B
C
1 2
A
B
C
D
O
P
Q
G H J J
M
L
F
KE
IR
N

3www.electrolux.com
B
A
A
B
30 sec
8 min
30 sec
Auto-Off Auto-ON
7
6
9
10a 10b 11
8
3
12
4 5

4www.electrolux.com
A
B
3 M
electrolux.com/shop
Ref: EDC03 ,900 923 064
14
17
15
16
C
D
A
B
13

5www.electrolux.com
Visit our website to:
Get usage advice, brochures, trouble shooter,
service information: www.electrolux.com
Register your product for better service:
www.electrolux.com/productregistration
Buy accessories and consumables for your appliance:
www.electrolux.com/shop
CONTENTS
ENGLISH 6
FRANÇAIS 11
17
WE’RE THINKING OF YOU
Thank you for purchasing an Electrolux appliance. You’ve chosen a product that
brings with it decades of professional experience and innovation. Ingenious and stylish,
it has been designed with you in mind. So whenever you use it, you can be safe in the
knowledge that you’ll get great results every time.
Welcome to Electrolux.
CUSTOMER CARE AND SERVICE
When contacting Service, ensure that you have the following data available:
- Model Number
- PNC number
- Serial number
The information can be found on the rating plate.

6www.electrolux.com
ENGLISH
Thank you for choosing an Electrolux product. In order to ensure the best results, always use original Electrolux
accessories and spare parts. They have been designed especially for your product. This product is designed with
the environment in mind. All plastic parts are marked for recycling purposes.
It may be possible that your steam iron does not produce steam immediately after lling it with water. The reason for
this is that air trapped in the inner system can delay this function a few seconds. Please be patient and try it again by
pressing the steam on/o button. For your convenience the steam will be produced after you release the steam on/
o button for a few seconds and it is not necessary to press the button all the time. Find out your rhythm for the best
steaming result.
COMPONENTS
A. Hot soleplate indicator
B. Water spray nozzle
C. Light indicator for heat-up/cool-down
D. Headlight illuminating ironing area
E. Temperature selector
F. Water lling container
G. Steam jet button
H. Spray button
I. Steam on/o button
J. Power cord
K. Flush Clean button
L. Soft Water Activator, replaceable
M. Water tank with max level indicator
N. Cord wrap facility
O. RESILIUM anodized ski-sloped soleplate
P. Water ll & Water Softener System cover
Q. Iron heel
R. Steam button lock
Picture page 2-4
GETTING STARTED AND OPERATING INSTRUCTIONS
1 Before rst use. Remove all adhesive remains and gently rub with a dampened cloth. Rinse water tank to
remove foreign particles. Position the steam iron horizontally on the ironing-board or on a heat resistant, secure
surface at the same height as an ironing-board. Unwind and straighten the power cord.
2 Fill the steam iron with water. Make sure, the plug is outside the power outlet. Raise the heel of the iron, open
the lling aperture cover (P). Use the water lling container provided (F), pour water to maximum level (M). Close
the cover (P). This product is appropriate for use with tap water. It is recommended to use Electrolux AquaSense
ltered water resp. a mix of 50% distilled, 50% tap water if the tap water is particularly hard.
Always rell the water tank to MAX level using cold water.
Caution! Never operate the appliance without any water in the tank.
This product is equipped with a detachable Soft Water Activator (L), we recommend to replace the Soft Water
Activator every 3 months.
Before starting ironing, please test your iron on an old towel to ensure that no residues inside the iron are
transferred to your garments. If necessary, wipe the soleplate with a slightly damp cloth.
3 Connect the steam iron to the mains supply. Select the ironing programme from the temperature selector (E)
on the steam iron. The light indicator (C) on the iron will pulsate when preheating. When turned on for the rst
time, temporary vapours/odours may occur. The iron is equipped with an auto-steam function, which automati-
cally adjusts the steam output to the selected ironing programme supporting best ironing results.
4 As soon as the selected temperature has been reached, the lights indicator (C) is on permanently and the head-
light (D) turns on. Now the iron is ready to be used.
5 To activate the steam function, press and hold the steam on/o button (I). To stop the steam function, release
the steam on/o button.
6 To use the continuous steam function, slide the steam button lock (R). To stop the continuous steam function,
slide the steam button lock.
7 For extra steam, press the steam jet button for one second.
Iron with extra steam: Press the steam buttons the same time for improved crease removal. When releasing the
buttons, use up the steam before putting the iron back on its heel.
Caution! Never release steam while the iron is standing on its heel.
Dry ironing: When not pressing steam buttons, the iron will be in dry mode.
8 Using the spray mist. Pre-damp fabrics by pressing the spray button several times to release a ne mist; ensure
the tank is at least half full.
9 Steam hanging items. The vertical steam function is ideal for curtains and suits. Hold the iron at a distance of
10-20 cm and press the steam jet button.

7www.electrolux.com
FR
AR
GB
10 The iron is equipped with 3-way auto-o function. If the iron is left unattended on soleplate or the side, it au-
tomatically turns o after 30 seconds. If left unattended on the heel it automatically turns o after 8 minutes. To
turn it on again, move the iron. A short beep can be heard before the iron is switched o by itself. To reactivate
the iron, move it shortly and it is back to working mode.
11 To switch-o the steam iron, turn the temperature selector to position 0, a short beep can be heard and all
lights will turn o. Disconnect the mains plug. Never pull the supply cord. Instead, grasp the plug and pull.
Empty the water tank and let the iron cool completely before storage.
12 Always store the iron on its heel with the cord twisted loosley around the cable wrap facility. To clean exterior
surfaces, use damp soft cloth and wipe dry. Do not use any chemical solvents, as they may damage the surface.
CLEANING (DO NOT USE ANY DETERGENT)
13 Flush Clean (K). Fill the tank with water to max level (M) and select“Linen”programme. When headlight ashes,
unplug the iron. Hold the iron over a sink, press the Flush Clean button (K). Use a full tank of water. Release button to
stop Flush Clean function. Repeat the procedure if necessary.
NOTE: DO NOT USE ANY DESCALING FLUID, VINEGAR OR CITRUS ACID!
14 Soft Water Activator (L)
is recommended right after Flush Clean. Open water lling cover (P) and pull the Soft
Water Activator (L) out for disposal. Replace with new Water Softener System Electrolux EDC03/900923064.
Both Flush Clean & Water Softener System in combination ensure a clean, soft steam for best ironing results and
longer lifetime of your steam iron.
15 Cleaning the soleplate (O). To remove burnt residues, iron over a damp cloth while the iron is still hot.
To keep the soleplate smooth, avoid contact with metal objects. Never use scouring pads or harsh cleaners as
they may damage the surface.
HOT SOLEPLATE INDICATOR (A)
16 Your appliance is equipped with hot soleplate indicator ThermoSafe™ which detects when the soleplate is hot by
changing its colour from black to red.
Note! During heat-up time, the soleplate might be hot even though the sticker didn’t turn red. Once the temper-
ature of the soleplate is < 40°C, the colour changes back to black showing the iron is ready to be stored away.
Enjoy your new Electrolux product!
SAFETY ADVICE
Read the following instruction carefully before using machine for the rst time.
• This appliance can be used by children aged from 8 years and above and persons
with reduced physical, sensory or mental capabilities or lack of experience and
knowledge if they have been given supervision or instruction concerning use of
the appliance in a safe way and understand the hazards involved.
• Children shall not play with the appliance.
• Cleaning and user maintenance shall not be made by children without
supervision.
• Keep the iron and its cord out of reach of children less than 8 years of age when it
is energized or cooling down.
• The surfaces are liable to get hot during use .
• This product is appropriate for use with tap water. It is recommended to use
Electrolux AquaSense ltered water, taking out impurities like limescale. If the

8www.electrolux.com
tap water is particularly hard, use a mix of 50% distilled water and 50% tap
water.
• The appliance may only be connected to a power supply whose voltage and
frequency comply with the specications on the rating plate!
• The iron is not to be used if it has been dropped, if there are visible signs of
damage on the iron or its cord or if it is leaking.
• The appliance must only be connected to an earthed socket. If necessary an
extension cable suitable for 16 A can be used.
• If the appliance or the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualied person, in order to avoid
hazard.
• The iron must be used and rested on a stable surface.When placing the iron on
its stand, ensure that the surface on which the stand is placed is stable.
• Never leave the appliance unattended while connected to the supply mains.
• The appliance must be switched o and the mains plug withdrawn each time
after use, before cleaning and maintenance.
• The plug must be removed from the socket outlet before the water reservoir is
lled with water.
• The mains cable must not come into contact with any hot parts of the appliance.
• Do not immerse the appliance in water or any other liquid.
• Do not exceed the maximum lling volume as indicated on the appliances.
• The lling aperture must not be opened during use.
• Before relling of the water reservoir, please remove plug from socket.
• Do not pour vinegar, descalers or other scented substances into the tank.
Otherwise the warranty may be revoked.
• This appliance is intended for domestic use only.The manufacturer cannot accept
any liability for possible damage caused by improper or incorrect use.

9www.electrolux.com
FR
AR
GB
IRONING CHART
FABRIC TEMPERATURE SETTING IRONING RECOMMENDATION
Acrylic Outdoor / Delicate Dry iron inside out.
Acetate Outdoor / Delicate Dry iron inside out while still damp or use spray to
dampen.
Nylon & Polyester Outdoor / Delicate Iron inside out while still damp or use spray to dampen.
Rayon Outdoor / Delicate Iron inside out.
Viscose Outdoor / Delicate Iron inside out.
Silk Outdoor / Delicate Iron inside out. Use an ironing cloth to prevent shiny
iron marks.
Cotton blends Outdoor / Delicate Check the label and follow the manufacturer’s
instructions. Outdoor setting is recommended for this
kind of ber.
Water-repellent
breathable fabrics
(excluding PVC-coatings)
Outdoor Gently wash and air-dry your outdoor garments
according to their care label instructions. Carefully and
slowly dry iron the outside to reach all parts of your
garment in order to reactivate the DWR (Durable Water
Repellency) treatment and restore the water repellency
of your garment*. You can use this setting after washing
and air-drying your outdoor garment or anytime you
want to restore the water repellency of certain areas of
your garment.
* Better than air drying only for water - repellent
outdoor garments
Wool & Wool blends Wool Iron inside out or use ironing cloth.
Cotton Cotton Dry iron while still damp or use spray to dampen. Use
maximum steam.
Corduroy Cotton Steam iron inside out or use ironing cloth.
Linen Cotton or Linen Iron inside out or use ironing cloth to prevent shiny iron
marks, especially with dark-colored fabrics. Dry iron
while still damp or use spray to dampen. Use maximum
steam.
Denim Cotton or Linen Use maximum steam. Apply maximum steam by
pressing and holding the steam on/o button.
Please follow the instructions of your garment care label.
Varied ironing speed and fabric dampness might cause optimal setting to dier from the recommendations in the
table!

10 www.electrolux.com
TROUBLESHOOTING
PROBLEM POSSIBLE CAUSE SOLUTION
Soleplate is not heating even
though iron is turned on.
Connection problem Check main power supply cable, plug and
outlet.
Temperature control is in“Outdoor”
position. Select higher programme like“ Cotton”.
Iron does not produce steam. Not enough water in tank. Fill water tank (see“Getting started”, no 2).
Selected temperature is lower than
that specified to use with steam. Increase temperature to at least “
Cotton”.
Steam jet and vertical steam
jet function does not work.
Steam jet function was used very
frequently within a short period.
Put iron on horizontal position and wait
before using steam jet function.
Iron is not hot enough. Adjust the proper temperature to steam
ironing (up to “Cotton”). Put iron in
vertical position and wait until temperature
indicator light turns o.
Water leaks from the soleplate
during ironing.
The iron is not hot enough. Select the Cotton setting (“Cotton” to
maximum) suitable for steam ironing.
Put the iron on its heel and wait until the
headlight is on before you start ironing.
Flakes and impurities come
out of the soleplate during
ironing.
You have used hard water, which has
caused scale akes to develop in the
water tank. Clean the iron according
to Cleaning section.
Press and hold the steam button for about
one minute to get steam. Then hold one
more minute in order to clean the steam
generating system. Before starting ironing,
please test your iron on an old towel to
ensure that no residues inside the iron are
transferred to your garments.
Water leaks from the soleplate
while the iron is cooling down
or after it has been stored.
The iron has been put in horizontal
position while there is still water in
the water tank.
Empty the water tank.
Brown streaks come out of the
soleplate while ironing and
stain the linen.
You may have used chemical
descaling agents dierent from the
recommendation.
To prevent this from happening, it is
recommended to exchange the Soft Water
Activator according to the indications.
Fabric bers have accumulated in
the holes of the soleplate and are
burning.
Clean the soleplate with a damp soft cloth.
Fabrics might not be properly rinsed
or the garments are new and have
not been washed before ironing.
Please rinse the fabrics properly before
ironing.
DISPOSAL
This symbol on the product indicates that this product contains a battery which shall not be disposed with
normal household waste.
This symbol on the product or on its packaging indicates that the product may not be treated as household
waste. To recycle your product, please take it to an ocial collection point or to an Electrolux service center
that can remove and recycle the battery and electric parts in a safe and professional way. Follow your
country’s rules for the separate collection of electrical products and rechargeable batteries.
Electrolux reserves the right to change products, information and specications without notice.