Electrolux E36GF76JPS2 User manual

Use _ Ca re Gu ide
36" Gas Ralsgc

2Fin in information
MAKEA RECORD
[] [] [] [] [] [] [] []
Brand
Purchase Date
Model Number
Serial Number
FORFUTUREUSE
[] [] [] [] [] m [] [] [] [] m [] I []
The serial and model numbers may be found as
shown at right.
Serial Plate Location
This unit can only be used with Natural Gas.
[] [] I I [] [] [] I [] I ill [] []
For toll-free telephone support in the U.S. and Canada:
1=877-4ELECTRO LUX (1-877=435=3287)
For online support and internet product information:
www.electroluxicon,corn
[] [] [] [] [] [] I [] []
@2010 Electrolux Home Products, Inc.
Post Office Box 212378, Augusta, Georgia 30917, USA
All rights reserved. Printed in the USA

Finqing Information 3
TABLEOFCONTENTS
! [] [] [] [] i [] _ [] I [] I [] [] [] [] [] [] I [] [] []
Finding Information.............................................2-3
Makea RecordforFutureuse..................................2
Questions?...............................................................2
Safety....................................................................4-9
ImportantSafetyInstructions....................................4
LiquefiedPetroleum(Propane)GasConversion......9
GroundingInstructions.............................................9
RangeFeatures.....................................................10
36"RangeFeatures...............................................10
Surface Cooking ..............................................11-16
Flamesize...............................................................11
ProperBurnerAdjustments.....................................11
BurnerLocations.....................................................11
PlacementofBurnerHeadsand Caps...................12
PlacementofBurnerGrates...................................12
SurfaceCookingUtensils.......................................13
UsingtheGridde....................................................13
UsingtheWokStand..............................................14
UsingtheSimmerPlate..........................................15
SettingSurfaceControls.........................................16
Getting Started.................................................17-18
BeforeSettingOvenControls............................17-18
Setting the OvenControls..............................19-23
OvenContrd Features...........................................19
GettingStarted.......................................................19
Baking.....................................................................19
BakingProblems....................................................20
ConvectionBaking..................................................21
ConvectionRoasting..............................................21
Broiling....................................................................22
SettingBroil............................................................23
Care& Cleaning...............................................24-32
UsingtheSelf-GeanFeature................................24
StartingtheOvenSelf-CleanCycle........................25
GeneralCleaning....................................................26
CareandCleaningdStainlessSteel.....................27
CleaningtheBurnerGrates,BurnerCaps,
BurnerHeads....................................................27-28
CooktopCleaningandMaintenance......................29
Cleaningrecommendationsfor theCeramic
GlassCooktop...................................................29-30
ToRemoveandReplacetheOvenDoor................31
SpecialDoorCareInstructions...............................31
OvenLight..............................................................32
Solutions to CommonProblems....................33-35
SurfaceBurnersDoNotLight.................................33
BurnerFlameonlyLightsHalfWay
AroundBurner........................................................33
BurnerFlameisOrange.........................................33
ScratchesorAbrasionsonCeramicGlassCooktop
Surface...................................................................33
MetalMarksonCeramicGlassCooktopSurface.....33
BrowStreaksandSpeckson Ceramic
GlassCooktopSurface...........................................34
AreasofDiscdorationonCeramic
GlassCooktopSurface...........................................34
Appliancenot Level................................................34
PoorBakingResults...............................................34
EntireOvenDoesNotOperate...............................34
OvenLightDoesNotWork.....................................35
FanNoiseDuringCookingOperation.....................35
OvenSmokesExcessivelyDuringBroiling.............35
Self-CleaningCycleDoesNotWork.......................35
SoilNotCompletelyRemovedAfter Self-cleaning
Cycleis Completed.................................................35
FlamesInsideOvenor SmokeFromVent..............35
WarrantyInformation...........................................36

afety
IMPORTANT8AF Y INSTRUCTIONS
m [] [] [] ! [] [] [] [] [] [] [] m I ! [] [] m m m
This manualcontainsimportantsafety symbolsandinstructions.Pleasepayattention to these
symbols andfollow all instructionsgiven.
A WARNING
This symbol will help alert you to situations that may cause serious bodily harm, deathor property
damage.
A CAUTION
This symbol will helpalert you to situations that maycausebodily injury or property damage.
[] []
A WARNING
To reducethe risk offire, electrical shock, or injury when using your range,follow basic precaution
including the following:
A WARNING
If the information in this manual is not followed exactly, a fire or explosion may resultcausing
property damage, personal injury or death.
FOR YOUR SAFETY:
-- Do not store or use gasoline or other flammable vapors and liquids in the vicinity ofthis
or any other applianceo
-- WHAT TO DO iF YOU SMELL GAS:
•Do not try to light any appliance.
° Do not touch any electrical switch; do not useany phone in your building.
.Immediately call your gas supplier from a neighbor's phone. Follow the gas supplier's
instructions.
°If you cannot reach your gas supplier, call the fire department.
-- Installation and service must be performed by a qualified installer, servicer or the gas
supplier.
. Remove all tape and packaging wrap before using the appliance. Destroy the carton
and plastic bags after unpacking the appliance. Never allow children to play with
packaging material.
• Proper Installation=Be sure your appliance is properly installed and grounded by a
qualified technician in accordance with the National Fuel Gas CodeANSi Z223.1/NFPA
No.54 in the United States, or in Canada CAN/CGA B149.1, and CAN/CGA B149.2,
and the National Electrical Code ANSi/NFPA No. 70mlatest edition in United States,
or in Canada CSA Standard C22.1, Canadian Electrical Code, Part 1, and local code
requirements. Install and/or adjust only per installation instructions provided inthe literature
package for this range.
• In case of an emergency, know howto disconnect the electrical power to the
appliance at the circuit breaker or fuse box and how to turn off the gas supply at
the main shut off valve.

Safety 5
• User ServicingmDo not repair or replace any part of the appliance unless
specifically recommended in the manuals. All other servicing should be done only by
a qualified technician to reduce the risk of personal injury and damage to the range.
•Never modify or alter the construction of arange by removing leveling legs,
panels, wire covers, anti-tip bracketslscrews, or any other part of the product.
A WARNING
*All rangescantip.
, Injuryto persons could result.
, Install anti-tip device packedwith range.
, See Installation Instructions.
To reducethe risk oftipping, the rangemust be secured by properlyinstalled
anti-tip bracket(s) providedwiththe range.Tocheck ifthe bracket(s) isinstalled
properly, removethe lower panel orstorage drawerand verify that the anti-tip
bracket(s) isengaged.Referto the Installation Instructions for properanti-tip
bracket(s) installation.
WARNING
- Stepping, leaning orsittingonthedoor ofthis rangecan result inserious injuriesand mayalso cause
damageto the range.Do notallowchildrentoclimbor playaroundtherange.Theweightof a childon an
opendoormaycausetherangetotip,resultinginseriousburnsorotherinjury.An opendoor,whenhot,may
causeburns.
- Donot use the ovenfor storage.
- NEVERusethis appliance asa space heaterto heat orwarmthe room. Doingso mayresultin carbon
monoxidepoisoningandoverheatingoftheoven.
A CAUTION
Donot store itemsof interestto children in the cabinetsabovethe appliance. Childrenclimbing onthe
cook'topto reachitems could be seriously injured.
•Storage in or on Appliance=-Flammable materials should not be stored in an
oven, near surface burners or in the drawer (if equipped). This includes paper,
plastic and cloth items, such as cookbooks, plasticware and towels, as welt as
flammable liquids. Do not store explosives, such as aerosol cans, on or near the
appliance. Flammable materials may explode and result in fire or property damage.
• Do not leave children alone--Children should not be left alone or unattended in
the area where appliance is in use. They should never be allowed to sit or stand on
any part of the appliance.
•DO NOT TOUCH SURFACE BURNERS, AREAS NEAR THESE BURNERS, OVEN
HEATING ELEMENTS OR INTERIOR SURFACES OF THE OVEN. Both surface
burners and oven heating elements may be hot even though they are dark in color
Areas near surface burners may become hot enough to cause burns. During and after
use, do not touch, or let clothing or other flammable materials touch these areas until
they have had sufficient time to cool. Among these areas are the cooktop, surfaces
facing the cooktop, the oven vent openings and surfaces near these openings, oven
door and window.

6afety
•Wear proper apparel--Loose-fitting or hanging garments should never be worn
while using the appliance. Do not let clothing or other flammable materials contact hot
surfaces.
• Do not use water or flour on grease fires--Smother the fire v_th a pan lid, or use
baking soda, a dry chemical or foam=type extinguisher.
• When heating fat or grease, watch it closely. Fat or grease may catch fire if allowed
to become too hot.
A WARNING
Incase of fire or gasleak, be sure to turn off the main gas shutoff valve.
• Use only dry potholders--Moist or damp potholders on hot surfaces may result
in burns from steam. Do not let potholders touch hot heating elements. Do not use a
towel or other bulk,/cloth instead of a potholder.
• Do not heat unopened food containers--Buildup of pressure may cause container
to burst and result in injury.
• Remove the oven door from any unused range if it is to be stored or discarded.
I[VIPORTANTmDo not attempt to operate the oven during a power failure. If the power
fails, always turn the oven off. If the oven is not turned off and the power resumes, the
oven may begin to operate again. Food left unattended could catch fire or spoil.
A WARNING
Useproper flame size--Adjustflame size soit does not extendbeyond the edge ofthe utensil. The
useof undersizedutensilswillexposea portionoftheburnerftametodirectcontactandmayresultin ignition
ofclothing.Properrelationofutensiltoflamewillalsoimprovecookingefficiency.
WARNING
Donotusestovetopgrillson theburnergratesofsealedgasburners.Ifyouusea stovetopgrill ona sealed
gasburner,itwillcauseincompletecombustionandcanresultin exposuretocarbonmonoxidelevelsabove
allowablecurrentstandards.Thiscanbe hazardoustoyourhealth.
A CAUTION
Electronic controllers can be damagedby cold temperatures.Whenyou use your appliance for the
first time, or if it hasnot been usedfor a longperiod of time, makesure that it has beenexposed to a
temperature above0°CI32°Ffor at least 3hours before connecting it to the power supply.
IMPORTANT INSTRUCTIONS FOR USING YOUR COOKTOP
•Know which knob controls each surface heating unit. Always turn the knob to the
LITE position when igniting the burners. Visually check that burner has lit. Then adjust
the flame so it does not extend beyond the edge of the utensil.
• Use proper pan size. This appliance is equipped with one or more surface burners of
different sizes. Select utensils having flat bottoms large enough to cover the surface
burner. The use of undersized utensils will expose a portion of the surface burner to
direct contact and may result in ignition of clothing. Proper relationship of utensil to the
surface burner wilt also improve efficiency.

Safety 7
• Utensil handles should be turned invcard and not extend over adjacent surface
burners--To reduce tile risk of burns, ignition of flammable materials, and spillage due
to unintentional contact with the utensil. The handle of the utensil should be positioned
so that itis turned inward, and does not extend over adjacent surface burners.
, Never leave surface burners unattended at high heat settings--Boilovers cause
smoking and greasy spitlovers that may ignite, or a pan that has boiled dry may melt.
• Protective liners--Do not use aluminum foil to line oven bottom or any other part of the
appliance. Only use aluminum foil as recommended for baking if used as a cover placed
on the food. Any other use of protective liners or aluminum foil may result in a risk of
electric shock or fire or short circuit.
•Glazed cooking utensils--Only certain types of glass, glass!ceramic, ceramic,
earthenware, or other glazed utensils are suitable for rangetop service without breaking
due to the sudden change in temperature. Check the manufacturer's recommendations
for rangetop use.
•Air curtain or other overhead range hoods, which operate by blowing a downward
air flow on to a range, shall not be used in conjunction with gas ranges other than
when the hood and range have been designed, tested and listed by an indepen=
dent test laboratory for use in combination with each other.
• Do not use decorative surface burner covers. If a burner isaccidentally" turned
on, the decorative cover will become hot and possibly melt. Burns wilt occur ifthe hot
covers are touched. Damage may also be done to the cooktop or burners because
the covers may cause overheating. Air will be blocked from the burner and cause
combustion problems.
•Do not clean or operate a broken cooktop--tf cooktop should break, cleaning
solutions and spillovers may penetrate the broken cooktop and create a risk of electric
shock. Contact a qualified technician immediately.
• Clean cooktop glass with caution--If a wet sponge or cloth is used to wipe spills on a
hot cooking area, be careful to avoid a steam burn. Some cleaners can produce harmful
fumes if applied to a hot surface.
-Avoid scratching the cooktop glass with sharp objects.
iMPORTANT iNSTRUCTiONS FOR USING YOUR OVEN
- Use care when opening oven door or warmer drawer (if equipped)--Stand to the
side of the range when opening the door of a hot oven. Let hot air or steam escape
before you remove or replace food in the oven! warmer drawer.
•Keep oven vent ducts unobstructed. The oven vent is located under the cooktop
Touching the surfaces in this area when the oven is operating may cause severe burns.
Also, do not place plastic or heat-sensitive items on or near the oven vent. These items
could melt or ignite.
A WARNING
Nevercoveranyslots,holesor passagesin theovenbottomor coveran entirerackwith materialssuch
asaluminumfoil. Doingso blocksairflow throughtheovenand maycausecarbonmonoxidepoisoning.
Aluminumfoilliningsmayalsotrapheat,causingafire hazard.
Placement of oven/warmer drawer (if equipped) racks. Always place oven racks in
desired locationwhile oven/warmer drawer (if equipped) is cool. If rack must be moved
while oven is hot use extreme caution. Use pothotders and grasp the rack with both
hands to reposition. Do not let potholders contact the hot heating elements in the oven/
warmer drawer (if equipped). Remove all utensils from the rack before moving.

afety
* Do not use the broiler pan without its insert. The broiler pan and its insert allow
dripping fat to drain and be kept away from the high heat of the broiler.
*Do not cover the broiler insert 'with aluminum foil, Exposed fat and grease could
ignite.
.Do not touch a hot light bulb with a damp cloth. Doing so could cause the bulb to
break. Disconnect the appliance or turn off the power to the appliance before removing
and replacing light bulb.
iMPORTANT iNSTRUCTiONS FOR CLEANING YOUR RANGE
*Clean the range regularly to keep all parts free of grease that could catch
fire. Exhaust fan ventilation hoods and grease filters should be kept clean. Do not
allow grease to accumulate on hood or filter. Greasy deposits in the fan could catch
fire. When you are flaming food under the hood, turn the fan on. Refer to the hood
manufacturer's instructions for cleaning.
SELF CLEANING OVENS
*In the self-Cleaning cycle only clean the parts listed in this Use and Care Guide.
Before self cleaning the oven, remove the broiler pan and any utensils or foods from the
oven.
*Do not use oven cleaners--No commercial oven cleaner or oven liner protective
coating of any kind should be used in or around any part of the oven.
* Do not clean door gasket--The door gasket is essential for a good seal. Care should
be taken not to rub, damage or move the gasket.
, Remove oven racks. Oven racks color will change if left in the oven during a self-
cleaning cycle.
CAUTION
The health of some birds is extremely sensitive to the fumes given off during the
self-cleaning cycle of the range. Move the birds to another ,well ventilated room.
iMPORTANT SAFETY NOTMCE
The California SafeDrinking Water and Toxic Enforcement Act requires the Governorof California to
publisha list ofsubstancesknowntothe stateto causecancer,birth defectsor otherreproductiveharm,
and requiresbusinesses to warn customers of potentialexposure to suchsubstances.
NOTE
Savethese importantsafety instructionsfor future reference.

Safety 9
LIQUEFmEDPETROLEUM (PROPANE)GAS CONVERSION
II Ill 111 III II [] II II [] [] II II II [] Ill 11 [] II II III [] []
This appliance can be used with Natural Gas and Propane Gas. It is shipped from the
factory for use with natural gas.
A kit for converting to LP gas is supplied with your cooktop. The kit is marked "FOR LP/
PROPANE GAS CONVERSION". Follow the installation instructions which are inside the
envelope.
The conversion must be performed by a qualified service technician in accordance with
the kit instructions and all local codes and requirements. Failure to follow instructions could
result in serious injury or property damage. The qualified agency performing this work
assumes responsibility for the conversion.
WARNING
Severeshock,or damagetothecooktopmayoccurifthecooktopisnotinstalledbya qualifiedinstalleror
electrician.
CAUTJ@N
Anyadditions,changesor conversionsrequiredin orderforthis appliancetosatisfactorilymeetthe
applicationneedsmustbe madebya qualifiedservicetechnicianin accordancewiththemanufacturer's
instructionsand allcodesand requirementsoftheauthorityhavingjurisdiction.Failuretofallowthe
instructionscouldresultin seriousinjuryorpropertydamage.Thequalified agencyperformingthiswork
assumesresponsibilityfortheconversion.
GROUNDINGiNSTRUCTIONS
[] II [] [] [] [] [] [] [] II II II [] [] II [] II II II [] II []
For personal safety, the cooktop must be properly grounded. For maximum safety, the
power cord must be plugged into an electrical outlet that is correctly polarized and properly
grounded.
DO NOT Operate the cooktop using a 2-prong adapter or an extension cord. If a 2-prong
watt receptacle is the only available outlet, it is the personal responsibility of the consumer
to have it replaced with a properly grounded 3-prong wall receptacle installed by a qualified
electrician.
See the INSTALLATION INSTRUCTIONS packaged with this range for complete installation
and grounding instructions.
A VVARNING
-Thisapplianceisequippedwitha3-pronggroundingplugforyourprotection
againstshockhazardandshouldbepluggeddirecUyintoaproperlygrounded
receptacle.DONOTcutor removethegroundingprongfrom thisplug.
- Personalinjuryordeathfromelectricalshockmayoccurif therangeis not
installedbya qualifiedinstallerorelectrician.
- Avoidfire hazardor electricalshock. DO NOTuse an adapterplug,an
extensioncord,orremovegroundingprongfromelectricalpowercord.Failure
tofollowthiswarningcancauseseriousinjury,fireor death.
Grounding
type wall
receptack
Do not, under any'_
circumstances, cut, I
remove, or bypass I
the grounding |
prong. 1"/
Power supply cord with
3-prong grounding plug

tan e Features
36" NGE FEATURES
[] [] [] [] [] [] [] [] [] [] [] !11 [] [] [] [] [] [] [] [] [] []
1. Oven Light Switch
2. Left Front Burner Control Knob
3. Left Rear Burner Control Knob
4. Center Front Burner Control Knob
5. Oven Function Control Knob
6. Oven Function Indicator Lights
7. Oven Temperature Control Knob
8. Center Rear Burner Control Knob
9. Right Front Burner Control Knob
10. Right Rear Burner Control Knob
11. Oven Vent
12. Oven Door Latch
13. Self-Clean Oven
14. Convection Fan Cover
15. Broil Burner
16. Adjustable Oven Racks
17. Door Handle
18. Stainless Steel Oven Door With Large
Window Opening
19. Stainless Steel Trim
20. Burner Grates
21. 14000 BTU Burner
22. 9500 BTU Standard Burner
23. 5000 BTU Simmer Burner
24. Glass Cooktop
25. 9500 BTU Standard Burner
26, 14000 BTU Burner
27. 18000 BTU Dual Flame Burner
28. Broiler Pan Cover
29. Broiler Pan
30. Top Burner Griddle
31. Wok Stand
32. Simmer Plate

Surface Cookin
FLAMESIZE
[] [] [] [] [] [] [] [] [] [] [] Iii [] [] II [] [] [] [] II! [] []
Formost cooking, start on the highest control setting and then turn to a lower one to
complete the process. Use the chart below as a guide for determining proper flame size for
various types of cooking. The size and type of utensil used and the amount of food being
cooked wilt influence the setting needed for cooking.
For deep fat frying_ use a thermometer and adjust the surface control knob accordingly.
If the fat is too cool, the food will absorb the fat and be greasy. If the fat is too hot, the food
will brown so quickly that the center will be undercooked Do not attempt to deep fat fry too
much food at once as the food will neither brown nor cook properly.
*Flame Size
High Flame
broiling
Medium Flame
gravies; steam
Low Flame
Type of Cooking
Start most foods; bring water to a boil; pan
Maintain a slow boil; thicken sauces,
Keep foods cooking; poach; stew
*These settings are based on using medium-weight aluminum pans with
lids. Settings may vary when using other types of pans.
Never extend the flame beyond the outer edge of the utensil. A higher flame
simply wastes heat and energy, and increases your risk of being burned by the
flame.
W
PROPER BURNER ADJUSTMENTS
[] [] [] [] [] [] [] [] [] [] [] [] [] mE [] [] I [] [] [] [] []
The color of the flame is the key to proper burner adjustment. A good flame is clear, blue
and hardly visible in a well-lighted room. Each cone of flame should be steady and sharply
defined. Adjust or clean burner if flame is yellow-orange. To clean burner, see instructions
under General Care & Cleaning.
BURNERLOCAT(ONS
[] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] []
Your cooktop is equipped with different sized burners.
The surface burners are located as follows:
a5 000 BTU (natural gas) burner at the right rear position;
a9 500 BTU (natural gas) burner at the center rear position;
two 14 000 BTU (natural gas) burners at the left rear and center front
positions;
a 18 000 BTU Dual Flame (natural gas) burner at the right front;
a9 500 BTU (natural gas) at left front position.
[] [] [] []

t 2 urface Cookin
PLACEMENTOFBURNERHEADSANDCAPS
[] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] []
For the 18 000 BTU burner:
Place the burner head over the gas orifice
(Figure 1). Be careful not to damage the
electrode while placing the burner head over
the orifice. Make sure electrode fits correctly
into slot in burner head.
Burner
Head
For all burners:
Place a burner cap on each burner head (see
Figure 2), matching the cap size to the head
size The cap for each burner has an inner
locating ring which centers the cap correctly on
the burner head. Be sure that all the burner caps
and burner heads are correctly placed BEFORE
using your appliance.
Figure1 Figure2
Make sure each burner cap is properly aligned
and level.
Turn the burner on to determine if it will light.
If the burner does not light, contact a Service
Center. Do not service the sealed burner
yourself.
PLACEMENTOFBURNERGRATES
[] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] []
Place grates on the Ceramic Glass Cooktop. Be sure they are right located
inside the stainless steel frame.
%ATTENTION: Do not slide the grates on the stainless steel frame, doing so
can damage the surface.

Surface Cookin 3
SURFACECOOKINGUTENSELS
[] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] []
_' *GOOD POOR
. Curved and warped pan bottoms.
Pans should have flat bottoms.
Check for flatness by rotating a
ruler across the bottom. There
should be no gaps between the
pan and ruler.
* Specialty pans such as lobster
pots, griddles and pressure
cookers may be used but must
conform to the above recom-
mended cookware require-
ments.
*Flat bottom and straight sides. *Pan overhangs unit by more than
2.5 cm (1").
* Tight fitting lids. !,
*Weight of handle does not tilt pan.
Pan is well balanced.
,Pan sizes match the amount of , Hea
food to be prepared and the size of
burner. .Flame extends beyond unit.
Made of material that conducts
heat well.
Easy to clean.
Note: Always use a utensil for its intended purpose. Follow manufacturer's
instructions. Some utensils were not made to be used in the oven or on the
cooktop.
USINGTHEGRIDDLE
il [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] []
Figure 1
Figure 2 Figure 3
Side with groow Flat Side
The griddle is intended for direct food cooking and can be used on both
sides (Figures 2 and 3). Do not use pans or other cookware on the griddle.
Doing so could damage the finish. With the grate in position over the burner,
set the griddle on top of the grate positioning the notches in the griddle over
the grate fingers (Figures 1 and 2).
CAUTION
Always placethe griddle on the grate beforeto turn on the burner.
Always use potholders to removethe griddle from the grate. Allow the griddle to cool before
removing. Donot set hot griddle on surfaces that cannot withstand high heat; such as countertops.
Besurethe griddle is positioned correctly and stable beforeuseto prevent hot spills and possible
burns.

t 4 urface Cookin
USINGTHEWOKSTAND
[] [] [] II [] [] [] [] [] [] [] [] [] [] [] [] [] [] !1 [] [] []
The Wok Stand provided with your cooktop is designed to allow round-bottomed woks to
be used. It is recommended that you use a 14 inch diameter (35.5 cm) or less Wok.
It is recommended that you use the right front POWER burner with the wok stand for best
performance. If properly positioned, the Wok Stand will not slide off the grate.
CAUTION
Always use potholdersto removethe wokstand from the grate. Allow thewokstand to cool
beforeremoving. Donot set hot wok standon surfacesthat cannot withstand high heat; such as
countertops.
Be surethe Wok Standis positionedcorrectly and stable before useto preventhot spills and
possibleburns.
To Properly Position the Wok Stand:
VViththe grate in position over the burner, set the Wok Stand on top of the grate positioning
the notches in the Wok Stand over the cooktop grate fingers (See Figure 1).
Figure 1
Proper use of flat-bottom wok
on Surface Burner Grate
Figure 2
NOTE
The Wokcookingperformanceisbest on the right front POWERburner
CAUTION
Be sureto ALWAYSusethe Wok Standifthe stabilityof thewok is
uncertain. If cooking large amountsof liquid food without the Wok Stand,
the wok may tip and spill overcausing burns.
Improper use of round-bottom wok
on Surface Burner Grate
Figure 3
Flat-bottom woks with large fiat
bottoms may also be used on your
cooktop Surface Burner Grates
without the Wok Stand (See Figure
2). insure the stability of the flat-
bottom wok before cooking without
the Wok Stand. If unstable, DO
NOT use the flat-bottom wok
without the Wok Stand.
Round-bottom woks (with a
support ring) should NOT be used
(See Figure 3). The supporting
ring was not designed for proper or
stable use on the Surface Burner
Grates,

Surface Cookin 5
USINGTHE SIMMER PLATE
[] [] [] [] [] I [] I I I [] [] [] I m i [] I [] i []
The simmer plate (Figure 1) is intended to diffuse lower temperature of the burner to
help cooking delicate aliment such as chocolate, milk, bechamel, etc... It can also be use
for cooking sauce during long period. With the grate in position over the burner, set the
simmer plate on top of the grate positioning the notches in the simmer plate over the grate
fingers (See Figure 2) and then place the utensil on the simmer plate.
Figure 1
Figure 2
CAUTWON
Always placethe simmer plateon the gratebefore to turn on the burner.
Always use potholders to removethe simmerplatefrom the grate. Allow the simmer plateto cool
before removing. Donot set hot simmer plateon surfaces that cannot withstandhigh heat; such as
countertops.
Besurethe simmerplate ispositioned correctly and stable before useto preventhot spills and
possible bums.

t 6 urface Cool{in
SETTINGSURFACECONTROLS
[] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] []
Your cooktop may be equipped with any combination of the following burners:
Simmer Burner: best used for simmering delicate sauces, etc.
Standard Burner: used for most all surface cooking needs.
Large Burner: best used when bringing large quantities of liquid to temperature and when
preparing larger quantities of food.
Regardless of size, always select a utensil that is suitable for the amount and type of food
being prepared. Select a burner and flame size appropriate to the pan. Never allow flames
to extend beyond the outer edge of the pan.
Your cooktop is also equipped with 270 ° rotation flame control valves. These valves
provide enhanced control of the burner flame: Each burner lights automatically from an
electric ignitor when its control knob is turned to the LITE position.
CAUT(ON
Donot placeplasticitemssuchassalt and peppershakers, spoonholders or p(ast(cwrappingson
top ofthecooktop when itis in use. Theseitemscouldmeltor ignite.Potholders,towelsor woodspoons
couldcatchfireifplacedtooclosetoa flame.
Regu(ar Burner - Fig, 1
Dual Burner - Fig. 2
To operate the surface burner:
1. Place cooking utensil on burner.
2. Push in and turn the Surface Control knob to LITE. Note: All electronic
ignitors will click at the same time. However, only the burner you are turning
on will ignite.
3. Visually check that the burner has lit.
4. Turn the control knob to the desired flame size. The control knobs do not
have to be set at a particular mark. Use the guides and adjust the flame as
needed. DO NOT cook with the Surface Control knob in the LITE position.
(The electronic ignitor will continue to click if left in the LITE position, causing
premature wear.)
In the event of an electrical power outage, the surface burners can be lit
manually. To light a surface burner, hold a lit match to the burner head, then
slowly turn the Surface Control knob to LITE Use caution when lighting surface
burners manually.

Gettin Started 17
BEFORESETTINGOVENCONTROLS
[] [] [] [] ! [] I ! [] [] [] _ [] ! [] [] m [] [] [] [] []
Oven Vent Location Oven vent
The oven is vented in the backguard.
When the oven is on, warm air is re-
leased through the vent. This venting is
necessary for proper air circulation in
the oven and good baking results.
@¢en Rack
Support Screw
Oven Rack Sup-
port Bracket
Installing Oven Rack Sup-
ports
ALWAYS INSTALL OVEN
RACK SUPPORT BEFORE
TURNING ON THE 0 VEN
(WHEN THE 0 VEN IS COOL). To remove the oven rack
supports for a self-clean cycle, remove the screw located
over the rack support on each side, pull up the support from
the oven rack support brackets to disengage supports from the
oven. If the rack supports are not removed, the self-clean cycle
won't start. Always remove the left side support first. To install
oven rack supports insert the rack supports into the rack sup-
port brackets on the oven side as shown and put back screws
at their original location.
Removing and Replacing Oven
Racks AL WAYS ARRANGE 0 VEN
RACKS WHEN THE 0 VEN IS COOL
(PRIOR TO OPERATING THE 0 VEN).
Always use oven mitts when using the
ove n.
To remove an oven rack, pull the rack
forward. Lift up the rack off the oven
rack slider. To replace an oven rack,
place the rack on the slider into the 4
pinholes located at the 4 corners of the
rack. Installed
on sliders
To remove
from
sliders
Pull oven rack forward and
lift it up of the oven rack
slider.
To place on
sliders
Removing Non-Sliding Oven Racks
Simply pull the rack and slightly tilt it upward when the rack hits its stop position.
Replacing Non-Sliding Oven Racks
Insert the rack into the oven rack supports by inserting the rack openings into the rack sup-
ports. Be sure the rack is at the same position on each oven rack support on both sides.
L[ [J[
Insert the openings
into the rack support
_ Always arrange the oven racks when the oven is cool (prior to operating the oven). Always useoven mitts when using the oven.

tGettin Started
BEFORESETTINGOVENCONTROLS(CONT'D)
I [] I I[] [] I [] [] [] [] [] [] [] [] I [] [] I [] [] [] []
1 Oven Rack
Rack
positions
Oven Rack Positions
ALWAYS ARRANGE 0 VEN RACKS WHEN THE 0 VEN
IS COOL (PRIOR TO OPERATING THE OVEN) Always
use oven mitts when the oven is hot.
Multiple Oven Racks
Always use potholdersorovenmitts whenadjusting theoven
racks. Wait until the ovenhascompletely cooledif possible.
Oven racksmay be HOTand maycause burns.
RECOMMENDED RACK POSITIONS
Rack Positions
MODE: BAKE
1 Rack: 6
Frozenpies 2 or 3
Angelfoodcake 2 or 3
Bread,Casseroles 2 or 3
Smallcutsof meator poultry 2 or 3
Turkey,Roastor Ham 1
2 Racks:
Cookies 1 & 5
Cakes 1 & 6
Croissants 1 & 6
MODE: CONVECTION BAKE
1 Rack: 6
2 Racks:
Cookies 1 & 4
Cakes 1 & 6
Croissants I & 6
3 Racks: 1,6 & 11
Note: Always use caution when removing food.
Air Circulation in the Oven
For best air circulation and baking results allow 2-4}>(5-10 cm) around
the cookware for proper air circulation and be sure pans and cookware
do not touch each other, the oven door, sides or back of the oven
cavity. The hot air must circulate around the pans and cook_t,!arein the
oven for even heat to reach around the food.

Settin the oven contro 19
CONTROLFEATURES
[] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] []
READTHE INSTRUCTIONSCAREFULLYBEFOREUSINGTHE OVEN. Forsatisfactoryuseofyouroven,
becomefamiliarwiththevariousfeaturesandfunctionsoftheovenasdescribedbelow.Detailedinstructions
for eachfeature andfunction follow later inthis Use& CareGuide.
SELECTOR CONTROL KNOB- Use to select the Bake,
Convection Bake, Convection Roast, Broil or Clean
Feature. BAKE-- Usedto select
the bake function.
CLEAN-- i
Used to /
select the © _ke
Self-Cleaning © cony_ke
cycle. ""_ _ © o_.vRo.st
BROIL-- /
Used to / © Braia
selectthe _ _ © ethan
broil function. -,_s /
_ _IH_ J" © -Lock
CONVECTION
ROAST--
Used to select
the convection
roasting mode.
OVEN TEMPERATURE CONTROL
KNOB-- Use to select the required
Bake, Convection Bake, Convection
Roast, Broil or Clean Temperature.
_"-_,.. OVEN FUNCTION INDICATOR LIGHTS---
Used to indicate which function is used.
CONVECTION BAKE-- Used to
select the Convection Bake feature.
GETTINGSTARTED
[] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] []
When the unit is first plugged in, or when the power supply to the range has been interrupted,
the indicator lights will flash and the control wilt beep. To stop the lights from flashing, turn
the selector control knob to BAKE and back to OFF.
[] [] [] [] [] II [] [] !! [] [] [] [] [] [] [] [] [] [] [] [] []
The oven can be set to bake at any temperature from 170°F to 550°F
To set the Bake Temperature to 350°F:
1. Arrange interior oven racks.
2. Turn the selector control knob to Bake.
3. The corresponding indicator light will flash.
4. Turn the temperature control knob to 350. The indicator light will stop flashing and the
oven will begin to preheat.
A beep will sound once when temperature reaches 350°R The indicator light will stay on
until the Selector or the Temperature knob is turned to the Off position.
5. Place food in oven and close oven door.
6. When baking is completed, turn the temperature and the selector control knobs to Off
position.
To change the Bake temperature (example changing from 360°F to 426°F):
1. After the oven has already been set at 350°F, and the oven temperature needs to be
changed to 425°F, turn the temperature control knob to 425°R A beep will sound when
the oven temperature reaches 425°R

ettin the oven controls
BAKINGPROBLEMS
[] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] []
For best cooking results, pre-heat the oven before baking cookies, breads, cakes, pies or
pastries, etc.
The cooking times and temperatures needed to bake a product may vary slightly from your
previously owned appliance.
Baking Problems
Cookies and biscuits
burn on the bottom.
Cakestoo dark on top or
bottom
Cakes not done in the
center
Cakes not level.
Foods not done when
cooking time is up.
Baking Problems and Solutions Chart
Causes
• Cookiesand biscuitsputintothe
ovenbeforethe preheatingtime
iscompleted.
•Ovenrackovercrowded.
• Darkpanabsorbsheattoofast.
•Cakesput intotheovenbefore
preheatingtimeiscompleted
• Rackpositiontoo highorlow.
• Oventoo hot.
,m,
•Oventoo hot.
• Incorrectpan size.
• Pannotcenteredin oven.
Rangenotlevel.
• Pantooclosetoovenwallor
rackovercrowded.
• Panwarped.
• Oventoocool.
Ovenovercrowded.
Ovendooropenedtoofrequently.
I Corrections
• Allowoventopreheatto theselectedtemperaturebeforeplac-
ingfoodin oven.
.Choosepansizesthatwill permit2"to 4"(5.1cmto 10.2cm)
ofair spaceonall sideswhenplacedin theoven.
• Usea medium-weightaluminumbakingsheet.
• Allowoventopreheatto theselectedtemperaturebeforeplac-
ingfoodin theoven.
• Useproperrackpositionfor bakingneeds.
• Setoventemperature25°Flowerthanrecommended.
• Setoventemperature25°Flowerthanrecommended.
• Usepansize suggestedin recipe.
• Useproperrackpositionandplacepan sothereis 2" to4" (5.1
cmto 10.2cm) dspaceon allsidesdpan.
• Placea markedglassmeasuringcupfilledwithwateronthe
centerofthe ovenrack.If thewaterlevelis uneven,referto
theinstallationinstructionsforlevelingthe appliance.
•Besuretoallow2" to4"(5.1cmto 10.2cm) ofclearanceon
allsidesof eachpanin theoven.
• Donotusepansthat aredentedor warped
• Setoventemperature25°F higherthansuggestedand bake
for therecommendedtime.
• Besuretoremoveall pansfrom theovenexcepttheonesto
be usedforbaking.
• Openovendooronlyaftershortestrecommendedbakingtime.