Electrolux PURE i9 User manual

Instruction Book
GB INSTRUCTION BOOK
FR MDE D’EMPLOI
BG   
CZ PŘÍRUČKA K POUŽITÍ
DE ANLEITUNG
DK VEJLEDNING
EE KASUTUSJUHEND
ES
MANUAL DE INSTRUCCIONES
FI OHJEKIRJA
HR KNJIŽICA S UPUTAMA
HU HASZNÁLATI ÚTMUTATÓ
IT ISTRUZIONI
LT INSTRUKCIJŲ KNYGELĖ
LV LIETOŠANAS PAMĀCĪBA
NO BRUKSANVISNING
PL INSTRUKCJA OBSŁUGI
RO MANUAL DE INSTRUCIUNI
SR 
RU
  
SE BRUKSANVISNING
SI NAVODILA ZA UPORABO
SK NÁVOD NA POUŽÍVANIE
TR TALİMAT KİTAPÇIĞI
UA 

ENGLISH
FRANÇAIS
БЪЛГАРСКИ
ČEŠTINA
DEUTSCH
DANSK
EESTI
ESPAÑOL
Click! SUOMI
HRVATSKI
MAGYAR
ITALIANO
LIETUVIŠKAI
LATVIEŠU
NORSK
POLSKI
CONTENTS
ROMÂNĂ
SRPSKI
РУССКИЙ
SVENSKA
SLOVENŠČINA
SLOVENČINA
TΫRKCE
УКРАЇНСЬКА

3www.electrolux.com
OVERVIEW OF THE ROBOT
HOW TO USE THE ROBOT VACUUM CLEANER
HOW TO CONNECT TO THE ”PUREI9” APP
TIPS ON HOW TO GET THE BEST RESULTS
EMPTYING THE DUST CONTAINER
CLEANING THE FILTER
MAINTENANCE
CHANGING THE BATTERIES
ERROR HANDLING
TROUBLESHOOTING
SAFETY PRECAUTIONS
CONSUMER INFORMATION AND SUSTAINABILITY POLICY
Click!
TABLE OF CONTENTS:

4www.electrolux.com
Overview of the robot
Description of your robot vacuum cleaner
1 Display / Control panel
2 ECO function button
3 SPOT cleaning button
4 Play/Pause button / O button (long press)
5 Home button
6 Clock
7 Dust container indicator
8 WIFI connection indicator
9 Scheduled cleaning indicator
10 Warning indicator
11 Battery status indicator
12 Fan unit
13 Air outlet
14 Bumper
15 Side brush
16 3DVision System (Camera)
17 Main wheels
18 Charging connectors
19 Brush roll lid
20 Brush roll
21 Battery compartments
22 Dust container release button
23 Dust container lid
24 Filter
25 Filter frame (and mesh net)
26 Dust container
27 Charging base
28 Charging connectors
29 Power adaptor and cord
* Accessories may vary from model to model.
1717
21
19
15 20
18
12
22
23
24
25
26
14
15
13
16
27 29
28
6
7
9
10
11
8
24135
22

5www.electrolux.com
How to use the robot vacuum cleaner
Installation of the robot vacuum cleaner
1.Place the Charging base on the oor against the
wall. Plug the adaptor to the power jack on the
side of the base. Connect the Power cord plug to the
main socket.Wind up excessive cord on the back of
the base. Make sure there is an empty area of 0.5 m
on the sides and 1.5 m in front of the Charging base.
WiFi model: Place the base in range of the WiFi
router.
2.Place the side brush.
Note: If the robot is used to clean rooms with wall-to-
wall carpet, remove the side brush for best cleaning
results.t
Battery/Charging status
3.Place the robot on the Charging base.
The Battery icon will pulse, to indicate that the
robot is recharging.
1.Red battery (A) indicates that the robot needs to
get charged.
Red light pulse (B): The robot is charging – Low
charging level.
White light pulse (C):The robot has charged
enough to be used. (Press Play/Pause button to
clean.)
White light (D): The robot is ready for use.
Full charging time is ~3 hours.
0.5 m
1.5 m
0.5 m
A B C D

6www.electrolux.com
How to use the robot vacuum cleaner
Battery/Charging status
2.To preserve the battery life and performance:
- Always keep the robot charging when not in use.
- Charge it as soon as possible in the charging base
after the cleaning cycle.Waiting too long might
aect the batteries.
3.Storage (not plugged): In case the robot is stored
without being charged for a longer period of time,
remove the batteries and store them separately.
(Charge batteries before removing them).
To remove the batteries see “Changing the batteries”
on page 15.
How to connect to the ”PUREi9”APP
1.Download the ”PUREi9”App in the App Store
or Google play and then follow the instruction to
create the account and connect to the robot.
Note: Make sure that the phone is connected to the
home WiFi (2.4 GHz).
2.During the process the App will ask you to
turn the robot upside down to activate theWiFi
module and scan the serial number bar code (A) or
enter it manually (B).Then continue following the
instruction from the App.
Note: before turning the robot, make sure that it has
been switched on for at least one minute.
2.4 GHz
5 GHz
B
A
We recommend to download the App and update the software before the first use.

7www.electrolux.com
How to use the robot vacuum cleaner
How to connect to the ”PUREi9”APP
3.When the setup is completed, turn the robot
back to its normal position.TheWiFi symbol (A)
will be lit up to indicate that the robot is connected
to your home network. Note: it could take a few
moments for the robot clock to automatically
synchronise with your mobile device.
Note: Pulsing WiFi symbol indicates that the robot is
trying to connect to the network.
Cleaning schedule
Cleaning can be scheduled in the APP (Days & time)
Cleaning modes
1.Press Play/Pause button (A) to start cleaning.
After a few seconds of start-up, cleaning will be
commenced.The robot will start cleaning alongside
walls, working its way inwards.
Note: Press “Play/Pause” (A) briefly to pause
cleaning, or press and hold to terminate cleaning.
2.Large rooms will be divided into cells of at
most 2 x 2.3 m.
Note: The cleaning pattern is more efficient if the
robot is started next to a wall.
A
PUREi9
A
~2.3m

8www.electrolux.com
Should recharging be needed during cleaning,
the home button will light up and the robot will
return to the charging base. Home button (A) is lit.The
battery and Play/Pause button (B) ash to indicate
that the robot is charging and that it will resume
where it stopped.
The robot will recharge up to 90% to resume cleaning
quicker. Charging time is ~2 hours.
How to use the robot vacuum cleaner
Auto Docking/Charging
When cleaning is completed, the robot
automatically returns to the charging base.
Note: If the robot is not started from the charging base,
it will return to the start position when finished.
Auto charging during cleaning cycle
Crossing threshold
ECO Mode
Before crossing a threshold or climbing
over any obstacle, the robot will stop and
check:
- the heights (A & B) on both sides of the
threshold/obstacle
- that the area on the other side is clear to
operate (C)
ECO mode: For a lighter cleaning, press the
ECO button to reduce the power, prolong
the running time and reduce noise level.The
robot will stay in ECO mode until the button is
pressed again.
2h
B
A
AB
C

9www.electrolux.com
How to use the robot vacuum cleaner
Docking
Stop cleaning and send the robot to the
charging base: Press the Home button. If the robot
is not started from the charging base, it will return to
the starting position.
SPOT Cleaning
SPOT cleaning (small area, ~1 m): Place the robot
facing the spot and press the SPOT button. The robot
will will clean the area twice.
Tips on how to get the best results
Preparing the cleaning area
Before cleaning, remove smaller and fragile objects such as clothing, curtain strings, papers and power
cords from the oor. If the device passes over a power cord and drags it, there is a risk that an object could
be pulled o a table or shelf.
Larger/taller objects such as chairs can be left as the robot will clean around them.
Strong light, Mirrored walls, oor-to-ceiling windows and very shining objects could disturb the 3DVision
system.
Limiting the cleaning area
The robot will clean all oors it can access.To limit the cleaning area, simply close doors or put an obstacle
in the way.
Dust emptying between scheduled cleanings
To get the most out of scheduled cleaning, empty the dust container regularly.

10www.electrolux.com
40 cm
22 mm
A
E
95 mm
D
C
B
D
C
AB
(A) Leave a space of 40 cm around furniture without legs.
(B) The robot easily crosses thresholds with a height up to 22 mm.
(C) It cleans under furniture with more than 95 mm space under.
(D) Place the charging base on the left side of a door.
(E) The robot detects stairs and steep clis.
Carpets: The robot cleans
- short-pile carpets: (A) in the same pattern as the room
- medium-pile carpets : (B) rst around it (C) and comes back later to clean the carpet separately
- high-pile carpets: (D) are not cleaned.When the robot reaches the edge it continues with the rest of
the cleaning.
Tips on how to get the best results
Preparing the cleaning area