Electrolux WARMER DRAWER User manual

318201031 rev. A (04/13)
EN WARMER DRAWER USE AND CARE GUIDE

2
©2013 Electrolux Home Products, Inc. All rights reserved. Printed in China.
Finding Information
ThankyouforchoosingElectrolux,thenewpremium
brand in home appliances. This Use & Care Guide is
part of our commitment to customer satisfaction and
product quality throughout the service life of your
new appliance.
We view your purchase as the beginning of a
relationship.Toensure our abilityto continue serving
you,pleaseusethis page to record importantproduct
information.
Keep a record for quick
reference
Please read & save this guide
Questions?
Serial Plate Location
For toll-free telephone support in the U.S. and
Canada: 1-877-4ELECTROLUX (1-877-435-3287)
For online support and Internet production information
visit http://www.electroluxappliances.com
You will find the model and serial number printed on
the serial plate. The serial plate is located along the
interior right side trim and visible when the warmer
drawer is opened.
Remember to record the serial number for future
reference.
Purchase date
Electrolux model number
Electrolux serial number
Table of contents
NOTE
Registering your product with Electrolux enhances
our ability to serve you. You can register online at
www.electroluxappliances.comorbydroppingyour
Product Registration Card in the mail.
Serial Plate Location
Serial Plate Location..................................................2
Important Safety Instructions.................................3-4
Before Setting Warmer Drawer Control....................5
• Arranging Warmer Drawer Rack Positions............5
Setting Warmer Drawer Controls...........................5-7
• To Operate the Warmer Drawer.............................5
• Humidity Controller Feature...................................5
• To Set the Controls................................................6
• To Power-Up the Controls .....................................6
• To Set the Target Temperature..............................6
• To Warm Serving Bowls and Plates ......................6
• Indicator Light........................................................6
• Auto-Shutdown......................................................6
• Recommended Food Settings...............................6
• Preparing Bread Dough for the Warmer Drawer ...7
• To Enable the Bread Proof Feature.......................7
General Care and Cleaning.....................................8-9
• To Remove and Replace the Warmer Drawer.......8
• Cleaning Various Parts of Your Appliance.............9
Solutions to Common Problems.............................10
• Drawer is not leveled...........................................10
• Cannot move appliance easily.............................10
• Warmer drawer does not operate........................10
Warranty information ...............................................12

3
• Removealltapeandpackagingwrapbefore
usingtheappliance.Destroythecartonand
plasticbagsafterunpackingtheappliance.
Never allow children to play with packaging
material.Donotremovethemodel/serialplate
attached to the cooktop.
• ProperInstallation-Besureyourappliance
is properly installed and grounded by a
qualified technician in accordance with
the National Electrical Code ANSI/NFPA
No. 70 - latest edition in the United States,
or CSA C22.1, Part 1 in Canada, and local
coderequirements.Installand/oradjustonly
per installation instructions provided in the
literature package for this appliance.
Ask your dealer to recommend a qualified
technician and an authorized repair service.
Know how to disconnect the electrical power to
the drawer at the circuit breaker or fuse box in
case of an emergency.
•User servicing—Do not repair or replace
anypartoftheapplianceunlessspecifically
recommended in the manuals. All other
servicing should be done only by a qualified
technician,Thismayreducetheriskofpersonal
injury and damage to the appliance.
•Never modify or alter the construction of a
cooktop by removing panels, wire covers
or any other part of the product.
What you need to know about safety instructions
Warning and Important Instructions appearing in this guide are not meant to cover all possible
conditions and situations that may occur. Common sense, caution and care must be exercised
when installing, maintaining or operating a microwave.
ALWAYS contact your dealer, distributor, service agent or manufacturer about problems or condi-
tions you do not understand.
Recognize Safety Symbols, Words, Labels
WARNING — Hazards or unsafe practices
which COULD result in severe personal injury
or death.
• ALL WARMER DRAWERS CAN TIP.
• INJURY TO PERSONS COULD RESULT.
• INSTALLANTI-TIPDEVICEPACKEDWITHWARMER
DRAWER.
• SEE INSTALLATION INSTRUCTIONS.
TO REDUCE THE RISK OF TIPPING OF THE WARM-
ERDRAWER,THEDRAWERMUSTBESECUREDBY
PROPERLYINSTALLEDANTI-TIPLOCKINGPLATES
PROVIDED WITH THE DRAWER. TO CHECK IF THE
LOCKING PLATES ARE INSTALLED PROPERLY,
GRASP THE HANDLE OF THE OPEN DRAWERAND
SEE IF THE DRAWER WILL SLIDE OUT OF THE
OPENING OR TIP OUT. REFER TO THE INSTAL-
LATION INSTRUCTIONS FOR PROPER LOCKING
PLATE INSTALLATION.
To reduce the risk of fire, electrical shock, or injury when using your appliance, follow
basic precaution including the following:
CAUTION — Hazards or unsafe practices
which COULD result in minor personal injury.
Important Safety Instructions
• StorageonAppliance—Flammablematerials
should not be stored in the drawer. This
includes paper, plastic and cloth items, such
as cookbooks, plasticware and towels, as well
as flammable liquids. Do not store explosives,
such as aerosol cans, on or near the cooktop.
Flammable materials may explode and result
in fire or property damage.

4
• Do not use the warmer drawer for
storage.
• Stepping,leaningorsittingonthedooror
drawer can result in serious injuries and
may also cause damage to the warmer
drawer. Do not allow children to climb or
play around the drawer. An open drawer,
when hot, may cause burns.
• Never use your appliance for warming or
heating the room.
•GlazedCookingUtensils—Onlycertaintypes
ofglass,glass/ceramic,ceramic,earthenware,
or other glazed utensils are suitable for use
without breaking due to the sudden change
in temperature. Check the manufacturer’s
recommendations.
•Use Care When Opening Warmer Drawer—
Stand to the side of the unit when opening
the door of a hot drawer. Let hot air or steam
escape before you remove or replace food in
the warmer drawer.
• PlacementofWarmerDrawerRacks—Always
place rack in desired location while drawer is
cool. If rack must be moved while hot, use
extremecaution.Usepotholdersandgraspthe
rack with both hands to reposition. Do not let
potholders contact the hot element or interior
ofthewarmerdrawer.Removeallutensilsfrom
the rack before removing rack.
• DoNotUseWateronGreaseFires—Smother
thefireorflameorusedrychemicalorfoam-
type extinguisher.
IMPORTANTINSTRUCTIONSFORCLEANING
YOUR WARM & SERVE DRAWER
•Clean the drawer regularly to keep all parts
free of grease that could catch fire. Do not
allow grease to accumulate. Greasy deposits
could catch fire.
•Kitchen cleaners/aerosols—Always follow
themanufacturer’srecommendeddirectionsfor
use.Beawarethatexcessresiduefromcleaners
and aerosols may ignite causing damage and/
or injury.
NOTE
Save these important safety instructions
for future reference.
IMPORTANT SAFETY NOTICE
The California Safe Drinking Water and Toxic
Enforcement Act requires the Governor of
California to publish a list of substances known
tothestatetocausecancer,birthdefectsorother
reproductive harm, and requires businesses to
warn customers of potential exposure to such
substances.
Important Safety Instructions
•Do Not Leave Children Alone—Children
shouldnotbeleftaloneorunattendedinthe
area where appliance is in use. They should
never be allowed to sit or stand on any part of
the appliance.
•DO NOT TOUCH INTERIOR SURFACES OF
THE WARMER DRAWER. Surfaces may be
hot even though they are dark in color. During
and after use, do not touch, or let clothing or
other flammable materials touch these areas
until they have had sufficient time to cool.
•Wear Proper Apparel—Loose-fitting or
hanging garments should never be worn
while using the appliance. Donotlet clothing
or other flammable materials contact hot
surfaces.
•Use Only Dry Potholders—Moist or damp
potholders on hot surfaces may result in
burns from steam. Do not let the potholders
touchhotheatingelements. Donot useatowel
or other bulky cloth instead of a potholder.
•Do Not Heat Unopened Food Containers—
Build-upofpressuremaycausethecontainer
to burst and result in injury.
•IMPORTANT—Donotattempttooperatethe
warmerdrawer during a power failure. If the
powerfails,alwaysturnthecontroloff.Ifthe
drawerisnotturnedoffandthepowerresumes,
the drawer may begin to operate again. Food
left unattended could spoil.
•Protective Liners—Do not use aluminum
foil to line warmer drawer. Any other use of
protective liners or aluminum foil may result in
poor performance or damage to the appliance.
Only use aluminum foil as recommended for
baking if used as a cover placed on the food.

5
Before Setting Warmer Drawer Control
Setting Warmer Drawer Controls
Upright Position Downward Position
Figure 1
Figure 2
Arranging Warmer Drawer
Rack Positions
To Operate the Warmer Drawer Humidity Controller Feature
The rack can be used in 2 ways:
• In the upright position to allow low profile food
items to be placed both under and on top of the
rack (for example, rolls or biscuits on top of the
rack and a casserole dish under).
The purpose of the warmer drawer is to keep hot
cooked foods at serving temperature. Always start
with hot food. It is not recommended to heat cold
food in the warmer drawer.
All food placed in the warmer drawer should be
coveredwithalidoraluminumfoiltomaintainmoisture
and softness. Do not cover crisp foods. Do not use
plastic wrap to cover food. Plastic may melt onto
the drawer and be very difficult to clean.
Use only dishware, utensils and cookware
recommended for oven use in the warmer drawer.
This feature may be used to control humidity in the
Warmer Drawer. The control knob is located on the
inner front panel of the Warmer Drawer.
• In the downward position to allow you to place
light weight food items and empty dishware (for
example, rolls or pastries and dinner plates).
Alwaysusepotholdersorovenmittswhenremoving
food from the warmer drawer as cookware and
plates will be hot.
Use the warmer drawer to keep hot foods hot such
as: vegetables, gravies, meats, casseroles, biscuits
and rolls, pastries and heated dinner plates.
The warmer drawer is equipped with a catch which
may require extra force when opening and closing
the drawer.
For dry heat: Slide
the humidity control
knob in the direction
of less moist (Figure
1). This allows more
of the moist heat to
escape and provides a
dryer environment for
the food in the Warmer
Drawer.
For moist heat: Slide
the humidity control
knob in the direction
of more moist (Figure
2). This will help keep
thefoodintheWarmer
Drawer from drying
out. Both heat and
moisturewillbeapplied
to the Warmer Drawer
cavity.

6Setting Warmer Drawer Controls
The digital controls
are used to set the
temperature of the
warmer drawer. It is
located at the right
side of the warmer
drawer in the open
position.
On the first power-up or after a power interruption,
the unit will flash “88:88°” in the display. Press
the ON-OFF pad twice. The display will show
“----”, prompting to press another pad. If no other
pad is touched, the unit will power off after a few
seconds.
The indicator light is located in the lower center
part of the front drawer glass. It turns on when the
control is set, and stays on until the unit is turned
off. Make sure indicator light is off when removing
food from the drawer.
This unit is programmed to automatically shutdown
after 4 hours it is left on. The element will stop
warmingthedrawer,theindicatorlightwillturnoffand
the electronic display will show an “OFF” message,
to remind the user that the unit auto-shutted off by
itself.
Heat bowls and plates on the 140°F setting. Place
empty dishes on the rack to raise them off drawer
bottom. To further heat dishes or to heat fine china,
check with the manufacturer for maximum heat
tolerance.
To select the lowest (90°F) warming temperature
available, press the -lo pad and wait for the a few
seconds for the acceptance delay. A second press
of -lo will lower the temperature to Bread Proof,
displayed by a “brPF” in the screen. The Bread
Proof function can also be accessed at any time by
pressing the pad.
To select the highest (210°F) warming temperature
available, press the +hi pad and wait for the few
seconds acceptance delay.
For any temperature between the lowest (90°F) and
the highest (210°F), press the +hi or -lo pads until
the desired temperature is displayed. The pads will
adjust the target temperature by 10°F steps each
time it is pressed.
When the desired temperature is set, wait a few
seconds for the controls to accept the input. The
display will show the temperature rising to the
target temperature and will sound a chime when it is
reached. It is recommended to let the unit pre-heat
for 10-15 minutes before placing meal in it.
To Set the Controls
To Power-Up the Controls
Indicator Light
Auto-Shutdown
Recommended Food Settings
To Warm Serving Bowls and
Plates
To Set the Target Temperature
Food Item Setting
Bacon 190°F
Biscuits 170°F
Casseroles 170°F
Eggs 170°F
Empty Dinner Plates 140°F
Fish, Seafood 170°F
Fried Foods 190°F
Gravies, creams, sauces 170°F
Ham 170°F
Hamburger Patties 190°F
Pancakes, Waffles 190°F
Pastries 170°F
Pies 170°F
Pizza 190°F
Pork Chops 190°F
Potatoes (baked) 190°F
Potatoes (mashed) 170°F
Poultry 190°F
Roasts (Beef, Pork, Lamb) 170°F
Rolls, soft 140°F
Rolls, hard 170°F
Vegetables 170°F

7
At anytime when the unit is ON, press the pad
on the warmer drawer digital controls. The display
will show “brPF”, indicating that the warmer drawer
is in Bread Proof mode. Wait a few seconds for the
controls to accept the input.
The Warmer Drawer has a Bread Proof feature
that can be used to help prepare bread dough. The
recommended length of time to keep bread dough
in the Warmer Drawer is about 45-60 minutes. Be
sure however to follow the recipe’s recommended
times.
The unrisen bread dough should be placed in a
large bowl since the dough will nearly double in
volume. Place the Warmer Drawer Rack in the
downward position (see Figure 1). Before placing
in the Warmer Drawer, cover the bowl with a moist
cloth or use wax paper that has been coated with a
non-stick type cooking spray.
To Enable the Bread Proof
Feature
Preparing Bread Dough for
the Warmer Drawer
Setting Warmer Drawer Controls
Figure 1
NOTE
The bread proof function uses low warming tem-
perature which could happen to be lower than
your room temperature. The drawer will not work
as a cooling device and will not be able to lower
the temperature under the ambient temperature.

8General Care & Cleaning
To Remove Warmer Drawer:
1. Turn power off before removing the warmer
drawer.
2. Open the drawer to the fully opened position.
3. Locate glide lever on each side of drawer, pull up
on the right glide lever and push down on the left
glide lever (See Figure 1).
4. Pull the drawer away from the range.
To Replace Warmer Drawer:
1. Pull the plastic slider to the front of the
glide slots on each side of the drawer cavity
(See Figure 2).
2. Alignthe glide on each side of thedrawer with the
drawer cavity glide slot.
3. Push the drawer into the drawer cavity until glide
levers “click” (approximately 2”). If you do not
heartheglidelevers“click”orthedrawerdoes
not feel seated remove the drawer and repeat
steps 1 thru 3.
To Remove and Replace the
Warmer Drawer
Turn the warmer drawer to OFF before removing
the drawer. DO NOT touch the warmer drawer
element. The element may still be hot enough to
cause burns, even if it is dark in color.
ElectricalShockHazard canoccur
and result in serious injury or death.
Disconnect appliance from electric
powerbeforecleaningandservicing
the warmer drawer.
Figure 2
Figure 1
Lever
Lever
Left glide
Right glide
Pull up lever
with finger
Pull down lever
with finger

9
General Care & Cleaning
Cleaning Various Parts of Your Appliance
Surfaces How to Clean
Plastic
Membrane Keypad Clean with a cloth soaked in soapy water. Rinse with a clean water and a dishcloth.
Note: Humidity controller knob can not be removed.
Stainless Steel
Door & Drawer Body Cleaners made especially for stainless steel are recommended.Always follow the manufacturer’s instructions. Be sure to rinse the cleaners. DO
NOT clean the door gasket. The door gasket is essential for a good seal.
Care should be taken not to rub, damage or remove the gasket.
Porcelain Enamel
Body Parts and Cavity Gentlescouringwithasoapyscouringpadwillremovemostspots.Rinse with a 1:1 solution of clear water and ammonia. If necessary, cover dif-
ficult spots with an ammonia-soaked paper towel for 30 to 40 minutes.
Rinse with clean water and a damp cloth, and then scrub with a soap-
filled scouring pad. Rinse and wipe dry with a clean cloth. Remove all
cleaners or the porcelain may become damaged during future heating.
DO NOT use spray oven cleaners.
Warmer Drawer Rack The rack may be removed for cleaning. Clean by using a mild, abrasive
cleaner following manufacturer’s instructions. Rinse with clean water
and dry
Before cleaning any part of the drawer, be sure control is turned OFF and the drawer is COOL.
REMOVE SPILLOVERS AND HEAVY SOILING AS SOON AS POSSIBLE. REGULAR CLEANINGS WILL
REDUCE THE NUMBER OF MAJOR CLEANINGS LATER.

10 Solutions to Common Problems
Before you call for service,review the following list. It may save you time & expense. The list includes
common occurrences that are not the result of defective workmanship or materials in this appliance.
Before you call
Problem Solution
Drawer is not
leveled • Poor installation. Place a level on the cutout bottom. Make sure bottom is level.
• Be sure cutout bottom is strong and stable enough to adequately support drawer
(and wall oven, if applicable).
Cannot move
appliance easily • Appliance must be accessible for service.
• Cabinets not square or are built in too tightly. Contact builder or installer to make
appliance accessible.
Warmer drawer
does not operate • Make sure cord/plug is plugged tightly into outlet.
• Service wiring is not complete. Contact your dealer, installing agent or authorized
servicer.
• Power outage. Check house lights to be sure. Call your local electric company for
service.