Element ELE4023 User manual

Bringing Colors To Life!
USER MANUAL
4K HDMI Splitter
1 in / 2 out
ELE4023
FULL
HD 1080p 4K 3D Dolby Digital
1x2

Introduction
The ELE4023 4K HDMI Splitter distributes one Ultra Hi-Def source to multiple Ultra HD
displays simultaneously, without loss of quality or resolution. It works with any Ultra Hi-Def
source and supports resolutions up to 4K x 2k @ 60Hz.
Features
01. Input port can operate in both HDMI and MHL mode
02. Compliant with HDMI 1.4 and MHL 2.0 standards
03. Supports HDMI 2.0 / YCbCr420 / 4K2K@60hz format
04. Supports one CSC(color space conversion) matrix
05. Each output transmitter port can select bypass or CSC mode individually
06. Supports HDMI 4Kx2K video format and 3D up to 1080P/3D@60Hz
07. Supports HDCP1.4
08. Supports digital audio format DTS-HD/Dolby-trueHD/LPCM7.1/DTS/Dolby-AC3/DSD
09. Supports signal retiming
10. Supports input up to 10m AWG26 HDMI standard cable length
11. Supports output up to 10m AWG26 HDMI standard cable length
12. No loss of quality
13. Installs in minutes
14. Includes DC5V/1A power supply
What’s In The Box
01. 4K HDMI Splitter (1x2)
02. 5V Power Supply
03. User Manual
page 2
Installation
01. Connect one HDMI cable from the output of your HDMI source device to the input of
the HDMI Splitter
02. Connect one HDMI cable from the output of your HDMI splitter to the input of each
HDMI display
03. Connect the 5V power supply to the HDMI Splitter

Notes
Please use this device as instructed to prevent unnecessary damage or harm
01. Optimize storage/usage conditions. Do not place the device in a damp,
high-temperature, dusty, erosive, and/or oxidative environment.
02. Handle with care. Do not drop, shake, or hit the device.
03. Keep away from water. Do not touch the power adaptor with wet hands.
04. Proper power cord usage. Do not disconnect the power cord by pulling the cable to
remove the plug from the socket.
05. Be sure to turn the power off when the device is not in use.
06. Do not open the cover and/or touch the internal parts.
07. Be sure to use the included power adaptor.
page 3
Specifications
HDMI Resolution YCbCr420 / 4k2k@60Hz / 3D / 1080p / 1080i /
720p / 576p / 576i / 480p
Supported Audio Formats DTS-HD / Dolby-trueHD / LPCM7.1 / DTS /
Dolby-AC3 / DSD
Max Bandwidth 340 MHz
Max Baud Rate 10.2 Gbps
Input/Output TMDS Signal 0.5 - 1.5 Volts p-p (TTL)
Input/Output DDC Signal 5 Volts p-p (TTL)
Input Cable Distance ≤10m AWG26 HDMI standard cable
Output Cable Distance ≤10m AWG26 HDMI standard cable
Max Working Current 600mA
Power Adapter Input AC (50HZ, 60HZ) : 100V-240V
Power Adapter Output DC 5V/1A
Operating Temperature Range -15˚C to +55˚C
Operating Humidity Range 5 to 90%RH (No Condensation)
Dimensions (L x W x H) 2.56 x 2.44 x 0.83 (inches) / 65 x 62 x 21 (mm)
Weight 0.51 (lbs) / 230 (g)

Troubleshooting
Before powering on the device, please check the connections carefully and make sure that
all cables are properly terminated. If you still experience issues, please use the following
troubleshooting guide to help diagnose the problem.
Problem Possible Solution
No Power 1.) Make sure power cable is properly connected to the socket.
2.) Make sure the power switch is turned on.
No Picture 1.) Make sure the TV is powered on
2.) Make sure the TV is properly connected to the device
3.) Make sure the source device is powered on
4.) Make sure the source device is properly connected
5.) Make sure all connections are in good condition
6.) Make sure all cables are in good condition
7.) Make sure all the cables meet spec requirements
Obscure Picture 1.) Try disconnecting and reconnecting cables
2.) Ensure proper connection at each port
3.) Make sure all cables are in good condition
4.) Make sure all the cables meet spec requirements
page 4