Elements CVMG800VTPL User manual

1-11
Item #: CVMG800VTPL
Margo Vanity Table
ASSEMBLY INSTRUCTIONS
WARNING:
RISK OF FIRE
LED LIGHT BULB
120V E26/MAX 25
WATT (Per Light Bulb)
Recommendation:Replace clear 4W/6W LED filament bulb equivalent 40W/60W Incandescent.
Light bulbs are located inside the drawer.

ASSEMBLY INSTRUCTIONS
Item #: CVMG800VTPL
Please identify and locate all assembly parts (see parts list) before discarding any packing materials.
Some parts may have become loose during transit.
1PCVANITY TOP1
QTY
DESCRIPTIONNO. SKETCH
1PCLEFT FRAME2
1PCRIGHT FRAME3
4
MADE IN TAIWAN
PARTS LIST
2-11
5 1PCBACK FRAME
1PCCROSSBAR

6
QTY
DESCRIPTIONNO. SKETCH
7
1PCGLASS
8
1PCMIRROR
9
MADE IN TAIWAN 3-11
10
2PCSSUPPORT CROSSBAR
11
2PCSDRAWER PULL
2PCSCAP
1PCPOWER OUTLET
(Install inside the drawer.)
(Install inside the drawer.)

12
QTY
DESCRIPTIONNO. SKETCH
13
14 2PCSCHAIR FRAME
15
MADE IN TAIWAN 4-11
8PCSLIGHT BULB
16
17 8PCS
MEDIUM BOLT
1/4" x 30mm
1PCSTOOL CUSHION
4PCSCHAIR CROSSBAR
12PCS
SHORT BOLT
1/4" x 12mm

18
QTY
DESCRIPTIONNO. SKETCH
19
20 2PCS
SCREW
3.5 x 12mm
21
MADE IN TAIWAN 5-11
18PCS
LONG BOLT
1/4" x 35mm
22
23 4PCS
LARGE SQUARE CAP
25 x 25mm
2PCS
HANDLE BOLT
5/32" x 22mm
6PCSGLASS TIP
4PCS
RETANGULAR CAP
13 x 26mm
(Install inside the drawer.)

24
QTY
DESCRIPTIONNO. SKETCH
25
6-11
4PCS
SMALL SQUARE CAP
20 x 20mm
4PCS
ALLEN KEY
4mm
NOTE: Do not tighten until each step is completed or instructed.
3
2
23
23
5
18
18
16
16
Step 1: 1. Insert Large Square Cap (23) onto the Left Frame (2) and Right Frame (3).
2. Attach Crossbar (4) to the Left Frame (2) and Right Frame (3) using Short Bolt (16)
with Allen Key (25).
3. Attach Back Frame (5) to the Left Frame (2) and Right Frame (3) using Long Bolt (18)
with Allen Key (25).
4

7-11
Step 3: Install Drawer Pull (10) and Cap (11) to the Drawer using Handle Bolt (19).
18
18
17
17
17
17
1
1
19
19
10
10
11
11
Step 2: Turn the Vanity Top (1) upside down on a protective surface. Attach the base
on the Vanity Top (1) using Medium Bolt (17) and Long Bolt (18) with Allen Key (25).

8-11
Step 4: Install Glass Tip (21) on the Vanity Top (1). And then place the Glass (6) on the
Glass Tip (21).
Step 5: Insert Retangular Cap (22) on the Support Crossbar (9). Place Mirror (7) on the Step4.
Attach Supprt Crossbar (9) to the Vanity Top (1) and Mirror (7) using Long Bolt (18) with Allen
Key (25).
6
21
21
21
22
22
22
22
18
7
18
9
9

9-11
Step 7: Install Light Bulbs (12) to the Mirror (7) as shown.
Light Bulbs (12) are located insdie the drawer.
Step 6: Install Power Outlet (8) to the Left Frame (2) using Screw (23) with Allen Key (25).
8
20
12
12
7
2

10-11
Step 8:
Attach Chair Crossbar (15) to Chair Frame (14) usnig Short Bolt (16) with Allen Key (25).
16
16
16
16
16
16
16
15
15
14
14
Complete. Congratulations on your assemble success.

11-11
Complete. Congratulations on your assemble success.
Step 9: Insert Small Square Cap (24) onto the Chair Frame (14). Attach Step 8 to the Stool
Cushion (13) using Medium Bolt (17) with Allen Key (25).
24
24
17
17
13