Elkay EFSBP33 User manual

Back and/or Side Panels for EFS Floor Sinks
Models EFSBP25, EFSSP23,
EFSBP33 and EFSSP21
®
SPECIFICATIONS
GENERAL
#18 gauge, type 304 (18-8) 12” (305mm) high stainless steel
back and/or side panels for EFS floor sinks. Exposed surfaces
are blended to a uniform satin finish. 1/2" (13mm) returns on all
four sides. Furnished with concealed wall hangers so no
exposed screwheads. (Installer is to caulk between panel and
EFS floor sink, and between back and side panels [if side
panel(s) is used].)
(CHECK MODEL(S) SPECIFIED)
EFSBP25 Back Panel for EFS2523C
EFSSP23 Side Panel for use with EFSBP25
Back Panel for EFS2523C*
EFSBP33 Back Panel for EFS3321C
EFSSP21 Side Panel for use with EFSBP33
Back Panel for EFS3321C*
*Two side panels required for fully recessed floor sink installation.
Elkay 2222 Camden Court
Oak Brook, IL 60523
PART NO. 74180027
Printed in U.S.A.
©2003 Elkay
(2/03) 18-22
www.elkay.com
Model EFSSP21 Model EFSBP33
Model ABCDEFGH
Number in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm
EFSBP25 25 635 12 305 20 508 103/16 259 107/16 265 133/4349 25/867 1/213
EFSSP23 223/8568 12 305 20 508 103/16 259 107/16 265 133/4349 25/867 1/213
EFSBP33 33 838 12 305 20 508 103/16 259 107/16 265 133/4349 25/867 1/213
EFSSP21 203/8518 12 305 20 508 103/16 259 107/16 265 133/4349 25/867 1/213
HHGGF
A
A
E
D
B
WALL
HANGER
C
H
3/8" (10mm) TURNDOWN
WALL
WALL HANGER
B
H
SIDE VIEW
DIMENSIONS
Model EFSBP33
Model EFSSP21
Model EFSSP21