Elkay Lustertone DLRQ331910 User manual

Cutout in No. of
Countertop 11/2" Dia.
U-Channel Quick-Clip®Overall Inside Each Bowl (11/2" Radius Faucet Minimum Ship.
Model Model L W L W D Corners) Holes Cabinet Wt.
Number Number A B C D E L W 4" Center Size Lbs.
DLR251910 –25 191/210 14 101/8243/8187/81, 2, MR2, 3, 4 or 5 30 23
DLR291810 –29 18 12 12 10 283/8173/81, 2, MR2, 3, 4 or 5 33 22
DLR331910 DLRQ331910 33 191/214 14 101/8323/8187/81, 2, MR2, 3, 4 or 5 36 23
DLR332210 DLRQ332210 33 22 131/216 101/8323/8213/81, 2, MR2, 3, 4 or 5 36 243/4
DLR332212 DLRQ332212 33 22 131/216 121/8323/8213/81, 2, MR2, 3, 4 or 5 36 243/4
DLR372210 DLRQ372210 37 22 16 16 101/8363/8213/81, 2, MR2, 3, 4 or 5 42 29
DLR432210 DLRQ432210 43 22 19 16 101/8423/8213/81, 2, MR2, 3, 4 or 5 48 323/4
DLR432212 DLRQ432212 43 22 19 16 121/8423/8213/81, 2, MR2, 3, 4 or 5 48 323/4
GENERAL
Highest quality sink bowls seamlessly formed of #18 gauge,
type 304 (18-8) nickel bearing stainless steel. Self-rimming.
DESIGN FEATURES
Bowl Depths: 10" [DLR291810]; 10-1/8" [all others]; 12-1/8"
[DLR(Q)332212 and DLR(Q)432212].
Coved Corners: 1-3/4" vertical and horizontal radius.
Bowl and Faucet Deck Recess: 3/16" below outside edge of
sink.
Finish: Exposed surfaces are hand blended to a lustrous
highlighted satin finish.
Underside: Fully undercoated to dampen sound and prevent
condensation.
OTHER
Drain Opening: 3-1/2".
NOTE: Unless otherwise specified, sink is furnished with 4 faucet
holes as shown.
These sinks comply with ANSI Standard A112.19.3M.
Elkay2222 Camden Court
Oak Brook, IL 60523 Printed in U.S.A. ©2004 Elkay
(Rev. 3/04) 1-19G
www.elkayusa.com
Model DLR(Q)3322104
1-3/4" R
1-3/4" R
E
4" 4" 4"
D
B
CC A
1-1/4"
In keeping with our policy of continuing product improvement, Elkay reserves the right to change
product specifications without notice. This specification describes an Elkay product with design, quality and functional benefits to the user. When making a comparison of other producers’ offerings, be certain these features are not
overlooked.
ALL DIMENSIONS IN INCHES, TO CONVERT TO MILLIMETERS MULTIPLY BY 25.4.
SINK DIMENSIONS (INCHES)*
*Length is left to right. Width is front to back.
Lustertone®Deep Double Bowl Sink
Models DLR and DLRQ Series
®
SPECIFICATIONS
HOLE DRILLING
CONFIGURATIONS
4"
4"
4" 4"
4" 4" 4"
4" 4" 4" 4"
1
2
MR2
3
4
5
Quick-Clip®Mounting System
U-Channel Type Mounting System