Model A B C
Number in mm in mm in mm
RNSF8238 44 1118 18 457 N/A N/A
RNSF8238L 601/41530 18 457 191/2495
RNSF8238R 601/41530 18 457 191/2495
RNSF8238LR 771/41962 18 457 191/2495
Rigidbilt®Double Compartment Scullery Sink
13/4" (44mm) Radius Coved
Corner Construction
SPECIFICATIONS
GENERAL
Model RNSF___________ #16 gauge, type 304, stainless steel
scullery sink. Large die-drawn compartments 18" (457mm) x
24" (610mm) x 13-1/2" (343mm) deep. Seamless drawn 1-3/4"
(44mm) radius coved corner construction. Full length 8"
(203mm) high backsplash with 45° sloped top. 1-1/2" (38mm)
wide inward sloping top channel rims. Steel channel reinforced
drainboards have a fan-shaped pitch for drainage.
Compartments with center outlets pitched to drain. Underside
of drainboards and compartments are undercoated to provide
a sound and condensation barrier. All exposed surfaces
polished to a satin finish. Rigidbilt sinks carry the NSF
International Certification.
Sinks supported on (4) LK251 stainless steel, 1-5/8" (41mm)
O.D. tubular legs. #16 gauge wall thickness. Adjustable bullet
shaped feet.
FURNISHED WITH:
SUPPORT LEGS: LK251. (Four) Stainless steel tubular legs,
1-5/8" (41mm) O.D. Adjustable bullet feet.
SPECIFIED FITTINGS:
SUPPLY:
DRAIN:
Elkay Manufacturing Company 2222 Camden Court
Oak Brook, IL 60523 Printed in U.S.A.
©2001 Elkay Mfg. Co.
(Rev. 7/01) 4-8F
www.elkay.com
(CHECK MODEL SPECIFIED):
A
B B
2-1/4"
(57mm)
1-3/4"R
(44mm)
3-1/2" (89mm) DIA.
CSK HOLE
24"
(610mm)
29-1/2"
(749mm)
TOP
VIEW
(MODEL WITHOUT DRAINBOARDS)
12"
(305mm)
FRONT
VIEW
(MODELS WITH “LR” SUFFIX –
LEFT AND RIGHT INTEGRAL DRAINBOARDS)
(MODELS WITH “L” OR “R” SUFFIX –
LEFT OR RIGHT INTEGRAL DRAINBOARD)
A
A8"
(203mm)
1-1/2" (38mm)
DIA. 2 HOLES 3-1/2"
(89mm)
CC 1-3/4"R
(44mm)
20-1/4"
(514mm)
13-1/2"
(343mm)
8"
(203mm)
44"
(1118mm)
36"
(914mm)
Model RNSF8238LR2
(Faucet Drillings and Location as Illustrated)
Available only in sizes shown above.
Shaded area is model carried in stock with standard faucet location.
