Elkay Sink LRQ250 User manual

Cutout in No. of
Countertop 11/2" Dia.
U-Channel Quick-Clip®Inside Inside (11/2" Radius Faucet Minimum
Model Model Overall Left Bowl Right Bowl Corners) Holes Cabinet
Number Number L W L W D L W D L W 4" Center Size
LR250 LRQ250 33 22 14 18 77/8131/216 77/8323/8213/81, 2, S2, 3 or 4 36
LRAD250 LRADQ250 33 22 14 18 ** 131/216 ** 323/8213/81, 2, S2, 3 or 4 36
LR250L –33 22 131/216 77/814 18 77/8323/8213/81, 2, S2, 3 or 4 36
GENERAL
Highest quality sink formed of #18 gauge, type 304 (18-8)
nickel bearing stainless steel. Self-rimming.
DESIGN FEATURES
LR(Q) Bowl Depth: 7-7/8".
LRAD(Q) Bowl Depth: 5-1/2", 6" or 6-1/2".
Coved Corners: 1-3/4" vertical and horizontal radius.
Bowl and Faucet Deck Recess: 3/16" below outside edge of
sink.
Finish: Exposed surfaces are hand blended to a lustrous
highlighted satin finish.
Underside: Fully undercoated to dampen sound and prevent
condensation. LR(Q)250(L) underside is fully protected by heavy
duty Sound Guard®undercoating.
These sinks comply with AMSE A112.19.3.
OTHER
LR250L, LR(Q)250 and LRAD(Q)250 drain openings are 3-1/2"
and located as illustrated. Note LRAD(Q)250 small bowl drain is
located centered left-to-right and off-center front-to-back as
illustrated. Suffix L (left) or R (right) denotes location of the
small bowl.
NOTE: Unless otherwise specified, sink is furnished with 4
faucet holes as shown.
OPTIONAL ACCESSORIES
Rinsing Baskets: LKWRB1418SS (large bowl), LKWRB1316SS
(small bowl), LKWERBSS (either bowl).
Bottom Grids: LKWBG1316SS [LR(Q)250(L)] (small bowl),
LKWOBG1316SS [LRAD(Q)250] (small bowl).
Cutting Boards: CB1613 (small bowl), CB1713 (small bowl),
CBR1316 (small bowl), CBR1418 (large bowl), CBS1316 (small
bowl), or CBS1418 (large bowl).
Elkay2222 Camden Court
Oak Brook, IL 60523 Printed in U.S.A. ©2007 Elkay
(Rev. 4/07) 1-59H
elkayusa.com
Model LRQ2504
Model LR250L4
In keeping with our policy of continuing product improvement, Elkay reserves the right to change
product specifications without notice. This specification describes an Elkay product with design, quality and functional benefits to the user. When making a comparison of other producers’ offerings, be certain these features are not
overlooked.
ALL DIMENSIONS IN INCHES, TO CONVERT TO MILLIMETERS MULTIPLY BY 25.4.
THIS PRODUCT, AS CONSTRUCTED IS SUBJECT TO INTERPRETATION OF A.D.A. REQUIREMENTS.
THE UNOBSTRUCTED KNEE SPACE REQUIRED TO SATISFY A.D.A. STANDARDS MAY NOT BE DESIRABLE.
SEE OTHER SIDE FOR PRODUCT DIMENSIONS.
SINK DIMENSIONS (INCHES)*
*Length is left to right. Width is front to back.
**Available in 5-1/2", 6" and 6-1/2" depths. Please consult your sales representative for other depths or modifications.
Lustertone®Double Bowl Sinks
Models LR250L, LR250 and LRQ250
Models LRAD250 and LRADQ250 – A.D.A. Compliant
®
SPECIFICATIONS
Quick-Clip®Mounting System
U-Channel Type Mounting System

Elkay2222 Camden Court
Oak Brook, IL 60523
elkayusa.com
Printed in U.S.A.
©2007 Elkay
1-59H (Rev. 4/07)
1
S2
2
4
3
1
S2
2
4
3
HOLE DRILLING CONFIGURATIONS
Left Version Right Version
Model LR
(
Q
)
2504 Illustrated
5"
5"
14" 13-1/2"
1-1/4"
33"
4"2"
1-3/4" R
1-3/4" R
4" 4"
7-7/8"
16" 22"
18"
2-1/4"
Model LR250L4 Illustrated
5"
5"
14"13-1/2"
33"
4"
1-3/4" R
1-3/4" R
4"4"
7-7/8"
16"
22" 18"
2-1/4" 2"
1-1/4"
Model LRAD
(
Q
)
250554 Illustrated
5"
5"
5"
14" 13-1/2"
1-1/4"
33"
4"2"
1-3/4" R
1-3/4" R
4" 4"
5-1/2"
16" 22"
18"
2-1/4"
Lustertone®Double Bowl Sinks
Models LR250L, LR250 and LRQ250
Models LRAD250 and LRADQ250 –A.D.A. Compliant
®
SPECIFICATIONS