Elmo Tt-l1 User manual

INSTRUCTION MANUAL

ＶＩＳＵＡＬＰＲＥＳＥＮＴＥＲ

TT-L１

Please read this instruction manual carefully before using this product.

(previously LX-1 and TT-LX1)

IMPORTANT SAFEGUARDS

Please read all precautions and warnings before using the product.

The information is provided to ensure proper operation of this product and will prevent

you or others from personal injury or loss of assets.

Review the following symbols so that you understand them before reading the rest of

the manual.

Please read carefully and keep the manual in a safe place for future reference.

Warning

Ignoring the warning and operating the system incorrectly

subjects the user to possible risk of injury or death.

Attention

Ignoring the warning and operating the system incorrectly

subjects the user to risk of injury or loss of assets.

Meaning of Symbols

Name: Caution

Meaning: Indicates that the user must, without fail, pay careful attention to any

sentences or illustrations marked with a Caution symbol.

Name: Prohibited

Meaning: Indicates that the user must pay careful attention to any sentences or

illustrations marked with a Prohibited (do not do) symbol.

Name: Do not use in a bathroom or shower cubicle

Meaning: Indicates that using the product in a bathroom or shower cubicle could

result in injuries through a fire or electric shock, and is strictly prohibited.

Name: Do not touch

Meaning: Indicates that touching the area could result in injuries through electric

shock, and is strictly prohibited.

Name: Do not disassemble

Meaning: Indicates that disassembling the product could result in injuries through

electric shock, and is strictly prohibited.

Name: Compulsory

Meaning: Indicates that the user must pay careful attention to any sentences or

illustrations marked with a Compulsory (must do) symbol.

Name: Unplug the power plug from the outlet

Meaning: Indicates that the user must unplug the power plug from the outlet.

Warning

If for any reason smoke comes out of the product, or you notice any unusual odors

or sounds, immediately turn off the power switch on the product and then unplug

the power plug from the outlet.

Continuing to use the product while it is operating unusually could result in a fire or

electric shock. Check that smoke is no longer coming out of the product, and then

contact your local dealer to request maintenance.

Do not attempt to service this product yourself.

If for any reason liquid is spilled into the product, immediately turn off the power

switch on the product and then unplug the power plug from the outlet.

Contact your local dealer immediately. Continuing to use the product in this

condition could result in a fire or electric shock.

If for any reason foreign objects enter the product, immediately turn off the power

switch on the product and then unplug the power plug from the outlet.

Contact your local dealer immediately. Continuing to use the product in this

condition could result in a fire or electric shock.

(Be extra careful if there are children in the area when using the product.)

If for any reason there is a breakdown causing no images to be projected, turn off

the power switch on the product and then unplug the power plug from the outlet.

Then contact your local dealer to request maintenance. Continuing to use the

product in this condition could result in a fire or electric shock.

If for any reason the product is dropped or the cabinet is damaged, turn off the

power switch on the product and then unplug the power plug from the outlet. Then

contact your local dealer. Continuing to use the product in this condition could result

in a fire or electric shock.

If the power cable or the cable of the AC adapter is damaged (e.g. if the inside of

the cord is exposed or broken), contact your local dealer and request a

replacement.

Continuing to use the product in this condition could result in a fire or electric shock.

Do not remove the back panel, cabinet, or cover from this product.

Doing so may expose you to dangerous voltage and could result in electric shock.

Contact your local dealer for any internal inspections, maintenance, or repair.

Do not remodel this device.

This could result in a fire or electric shock.

Do not place this product on an uneven surface of unstable stand. It could fall or

topple over and result in an injury.

Be sure to use the power cable and the AC adapter supplied with the product.

Otherwise, a fire or electric shock could occur.

The supplied power cable and the AC adapter are designed to be used for the LX-1

only. Do not use them for other products.

Do not spill water or insert any foreign objects into this product.

This could result in a fire or electric shock. Do not use this product in rainy weather,

during a snowfall, on the coast, or on a water front.

Do not place any heavy objects on the power cable or the AC adapter. Do not place

this product on top of the power cable or the AC adapter. Do not cover the power

cable or the AC adapter.

The cable could be damaged and result in a fire or electric shock. (If the cable is

covered by a carpet, there are times when you may not notice that a heavy object

has been placed on the cable.)

Do not damage, process, pinch, twist, pull, or heat the power cable or the AC

adapter.

The cable could be damaged and result in a fire or electric shock.

Do not use this product in a bathroom or shower cubicle.

This could result in a fire or electric shock.

If there is dust on the prongs of the power plug or the connector surface, turn off the

power switch on the product, unplug the power plug from the outlet, and then

remove the dust.

The drop in insulation for the power plug could result in a fire.

Do not touch the product, the connector cable, the power cable, or the AC adapter

during a thunder storm. This could result in an electric shock.

Attention

Whenever moving the product, turn off the power switch on the product and then

unplug the power plug from the outlet. Move after checking that the external

connection cable is disconnected. Otherwise, the cable could be damaged and

result in a fire or electric shock.

For safety reasons, if this product is not used for a long time, be sure to unplug the

power plug from the outlet. Otherwise, it could result in a fire.

Do not disconnect the power cable or the AC adapter by pulling the cable.

Otherwise, the cable could be damaged and result in a fire or electric shock.

Disconnect by holding both ends of the power plug or the AC adapter.

If the product is placed on a stand with casters, make sure the caster's brakes are

on. It could result in an injury if it moves and falls.

Do not place the product in a damp or dusty location.

This could result in a fire or electric shock.

Do not place the product in a location where it could be exposed to smoke, steam,

or water droplets such as on a kitchen counter or near a humidifier. This could result

in a fire or electric shock.

Do not sit on, or place any heavy objects on, this product. Be extra careful if there

are any small children in the area when using the product.

It could result in an injury if it falls or breaks.

Do not place the power cable or the AC adapter next to a heater.

The cable covering could melt and result in a fire or electric shock.

Do not connect or disconnect the power cable or the AC adapter with wet hands.

Otherwise, it could result in an electric shock.

Make sure the power plug is securely inserted into the outlet.

If it is not inserted correctly, it could generate excess heat and dust could enter

which could result in a fire.

Also, touching a prong of the power plug could result in an electric shock.

Do not use a loose outlet.

Excess heat could be generated and result in a fire. Request a replacement outlet

from your local dealer or electrical appliance store.

BEFORE YOU USE

■Be sure to use the power cable or the AC adapter supplied with the product. Do not use them

with other products.

■Be sure to use the AC adapter applicable to your local power specifications. If the product was

sold in Japan, use the AC adapter sold with the product with 100 VAC and 50 or 60 Hz.

■When storing the product, do not leave it under direct sunlight or by heaters. It may be

discolored, deformed, or damaged.

■Do not place this product in any humid, dusty, salt bearing wind, or vibrating locations.

Use it under the following environmental conditions:

Temperature: 0°C - 40°C

Humidity: 30% - 85% (No condensation)

■Use a soft, dry cloth for cleaning.

Do not use any volatile solvent such as thinner or benzene.

■Luminescent and Black Spots

There may be some pixels that do not properly operate due to the use of CMOS Area Image

Sensors made-up of many pixels.

Though luminescent or black spots may be found on the screen, it is a phenomenon peculiar

to the CMOS Area Image Sensors and is not a malfunction.

■Follow the guidelines below to prevent the unit from dropping or overturning.

• Use the product on a stable base, desk, or table. Do not place the product on an unstable

base or slanted location.

• Place or wire the product to prevent the power cable, the AC adapter cable or the video

cable from pulling.

■Carry the product by holding the lower part of the main unit in both hands. Never hold the

product by the column or the camera head.

■Pay careful attention when using (including setting-up and storing) or transferring the product

to prevent the camera head from receiving any shocks.

■Be careful not to pinch your fingers when moving the arm or camera head.

■Do not point the lens directly to the sun. It could degrade the imaging capability.

■Do not look directly into the LED light. If you look directly into it at close range, your eyes may

be injured.

■If this product is used for longer than the warranty period, its performance and quality may

deteriorate due to the lifetime of its parts. For parts replacement (on chargeable basis), consult

the dealer from whom you purchased this product or our branch/office near your location.

■Menu and Icons

Some functions of this product may not be set or used depending on the operation mode or

menu settings.

■Copyright

Unless used for personal use, it is prohibited strictly under copyright law to use any photo files

without the prior consent of the copyright holder. Even if using for personal use, be careful that

there could be a situation where video or audio recording is restricted or illegal.

■The contents of this document are subject to change without notice. The latest version can be

obtained from the following Website:

http://www.elmousa.com

http://www.elmoeurope.com

■It is prohibited under copyright law to use or copy any part or the whole of this document

without our prior written consent.

■ELMO shall not be liable for any claim for damage or loss of earnings or any claim raised by a

third person due to the use, malfunction or repair of this product.

HANDLING PRECAUTIONS

The followings are special precautions against mishandling of the product, which may cause

serious damages to the product. Pay close attention to them.

⑤Camera head

Make sure to return the camera head to the

initial position before moving

the camera head.

Otherwise, the camera

head could be damaged.

①Installation

Do not place the product on an unstable place or

slanted surface.

②Carrying the product

Carry the product by holding the lower

part of the main unit in both hands.

Be careful not to give an impact to

the column or the camera head.

④Cabling of the AC adapter

Do not wrap the power cable tightly around the

AC adapter. By doing so may cause cable

disconnection.

③Zoom operation

Rotate the zoom dial gently. Otherwise the zoom

dial may be broken.

■TABLE OF CONTENTS

IMPORTANT SAFEGUARDS·································································································································· 2

BEFORE YOU USE····················································································································································· 6

HANDLING PRECAUTIONS ··································································································································· 8

■TABLE OF CONTENTS········································································································································ 9

➊PREPARATION····················································································································································· 11

➋BASIC OPERATIONS········································································································································· 12

2-1 DOCUMENT CAMERA ··································································································································· 12

■PART NAMES ·······················································································································································12

■OPERATING PANEL ··········································································································································13

■REAR PANEL AND CABLE CONNECTION ······························································································14

■MOVING PARTS OF THE LX-1 ····················································································································16

2-2 SUPPLIED ACCESSORIES·························································································································· 17

■IMAGE MATE 4 ····················································································································································17

2-3 SHOOTING IMAGES ······································································································································· 18

■SETTING UP THE LX-1 ···································································································································18

■TURNING THE POWER ON/OFF··················································································································19

■ADJUSTING THE SIZE ·····································································································································20

■AF（AUTO FOCUS）············································································································································21

■ADJUSTING THE BRIGHTNESS···················································································································22

■TURNING THE LED ON/OFF·························································································································23

■CHANGING THE OUTPUT DESTINATION ·······························································································24

2-4 CHANGING THE SETTINGS························································································································ 25

■HOW TO CHANGE THE SETTINGS······································································································25

■LIST OF MENU ICONS·································································································································25

■DESCRIPTIONS OF EACH MENU·········································································································26

➌ADVANCED OPERATIONS ····························································································································· 28

3-1 CONNECTING TO A COMPUTER VIA THE USB CABLE ····························································· 28

➍ABOUT IMAGE MATE 4···································································································································· 30

4-1 INSTALLING IMAGE MATE 4 ····················································································································· 30

■INSTALLATION PROCEDURE·······················································································································30

4-2 USING IMAGE MATE 4 ·································································································································· 31

■HOW TO SELECT THE CAMERA·················································································································31

■MENU WINDOW OF IMAGE MATE 4 ···········································································································32

➎ABOUT THE SETTING TOOL························································································································ 34

5-1 STARTING THE SETTING TOOL·············································································································· 34

5-2 USING THE SETTING TOOL ······················································································································ 34

➏OTHERS··································································································································································· 35

6-1 SHOOTING FORWARD OR BACKWARD······························································································· 35

6-2 ABOUT THE BASE PLATE·························································································································· 35

■HOW TO CHANGE THE POSITION BASE PLATE················································································35

6-3 DISPLAYING ENLARGED IMAGESUSING A MICROSCOPE························································ 36

■PROCEDURE·························································································································································36

■EXITING THE MICROSCOPE MODE···········································································································37

6-4 FIRMWARE UPDATE PROCEDURE········································································································· 38

6-5 CAPTURING A3 SIZED DOCUMENTS ··································································································· 39

➐TROUBLE SHOOTING······································································································································· 40

7-1 SYMPTOMS AND CONFIRMATION········································································································· 40

➑SPECIFICATIONS················································································································································ 42

8-1 GENERAL····························································································································································· 42

8-2 MAIN CAMERA·················································································································································· 42

8-3 ILLUMINATION DEVICE································································································································ 43

8-4 TRADEMARKS AND LICENSES ················································································································ 44