Elnec DIL48/SSOP56 ZIF Flash-2 User manual

DIL48/SSOP56 ZIF Flash-2
(ord.no. 70-0099)
special adapter, assigned for AMD AM29BL802/162
Flash E ROMs in SSO 56 package
operation (mechanical) life of ZIF socket - 10.000
actuations
made in Slovakia
Ord. no 70-0099
Socket ZIF SSOP56, ClamShell or open top type
Bottom 2 rows, 2x 24 p ns, square, 0.6x0.6mm, rows spac ng
600m l
Class Spec al zed for
Subclass EPROM/Flash
Adapter manual
For ClamShell type of ZIF socket:
Insert adapter to the device programmer ZIF socket according to the picture placed near of it. If you have
some doubts about orientation of this adapter in device programmer ZIF socket, it is valid general rule, the
orientation of the text of title is the same as the text on the top of the device programmer.
Open the adapter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position
of the programmed device in adapter ZIF socket is show at picture near (mainly left above) the adapter ZIF
socket.
Visually check interconnection between device and adapter ClamShell ZIF socket. If everything looks OK, close
it and now, device is ready for programming.
Be careful, because the incorrect insertion of adapter to the device programmer ZIF socket or device to the
adapter ClamShell ZIF socket can damage the programmed device.
To take out the device, open adapter ClamShell ZIF socket and remove device from it.
For open top type of ZIF socket
Insert adapter to the device programmer ZIF socket according to the picture placed near of it. If you have
some doubts about orientation of this adapter in device programmer ZIF socket, it is valid general rule, the
orientation of the text of title is the same as the text on the top of the device programmer.
ush the top of adapter ZIF socket to open it. Insert the device into the adapter ZIF socket. The right position
of the programmed device in adapter ZIF socket is show at picture near (mainly left above) the adapter ZIF
socket. Then release adapter ZIF socket.
Visually check interconnection between device and adapter ZIF socket. If everything looks OK, the device is
ready for programming.
Be careful, because the incorrect insertion of adapter to the device programmer ZIF socket or device to the
adapter ZIF socket can damage the programmed device.
To take out the device push the top of adapter ZIF socket and remove device from it.
When you finish work with adapter, remove it from the device programmer ZIF socket.
Do not directly touch the pins of the adapter and adapter ZIF socket, because dirt may cause errors during
programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
Software note
If software version, you're using currently, doesn't contain support for this programming adapter, please
download the latest version of software - Regular or OnDemand - from our web site.

Accepted package(s)
SSOP56