Elnec 70-0070 User manual

DIL28/TSOP28 ZIF 11.8mm
(ord.no. 70-0070)
universal adapter, assigned for devices in TSOP28
package (for example EPROMs, EEPROMs, serial
LASHs, SRAMs)
operation (mechanical) life of ZI socket - 10.000
actuations
made in Slovakia
Ord. no 70-0070
Socket ZIF TSOP28, open top type
Bottom 2 rows, 2x 14 pins, square, 0. x0. mm, rows spacing
500mil
Class Universal
Subclass DIL/TSOP
Adapter manual
Insert adapter to the device programmer ZI socket according to the picture placed near of it. If you have
some doubts about orientation of this adapter in device programmer ZI socket, it is valid general rule, the
orientation of the text of title is the same as the text on the top of the device programmer.
Push the top of adapter ZI socket to open it. Insert the device into the adapter ZI socket. The right position
of the programmed device in adapter ZI socket is show at picture near (mainly left above) the adapter ZI
socket. Then release adapter ZI socket.
Visually check interconnection between device and adapter ZI socket. If everything looks OK, the device is
ready for programming.
Be careful, because the incorrect insertion of adapter to the device programmer ZI socket or device to the
adapter ZI socket can damage the programmed device.
To take out the device push the top of adapter ZI socket and remove device from it.
When you finish work with adapter, remove it from the device programmer ZI socket.
Do not directly touch the pins of the adapter and adapter ZI socket, because dirt may cause errors during
programming of device.
or handling with the device we recommended to use a vacuum pick up tool.
If programming yields isn't 100% when using programming adapter or if some unreliability appears, try to
connect one 22n -100n multilayer capacitor (that meet the EIA X7R or Z5U specification) between leads of
adapter connected to pins VCC and GND pins of programmed chip.
Software note
If software version, you're using currently, doesn't contain support for this programming adapter, please
download the latest version of software - Regular or OnDemand - from our web site.

Accepted package(s)
TSOP28