Elnec 70-0881 User manual

DIL16W/SOIC16 ZIF 300mil
(ord.no. 70-0881)
universal adapter, assigned for SOIC devices up to
16-pins
operation (mechanical) life of ZIF soc et - 10.000
actuations
made in Slova ia
Ord. no 70-0881
Socket ZIF SOIC16, open top type
Bottom 2 rows, 2x 8 pins, square, 0.6x0.6mm, rows spa ing
600mil
Class Universal
Subclass DIL/SOIC
Adapter manual
Insert adapter to the device programmer ZIF soc et according to the picture placed near of it. If you have
some doubts about orientation of this adapter in device programmer ZIF soc et, it is valid general rule, the
orientation of the text of title is the same as the text on the top of the device programmer.
Push the top of adapter ZIF soc et to open it. Insert the device into the adapter ZIF soc et. The right position
of the programmed device in adapter ZIF soc et is show at picture near (mainly left above) the adapter ZIF
soc et. Then release adapter ZIF soc et. If you use this adapter for devices with less than 16 pins, then place
device to the bottom edge of adapter ZIFsoc et. Upper contacts stay unconnected.
Visually chec interconnection between device and adapter ZIF soc et. If everything loo s OK, the device is
ready for programming.
Be careful, because the incorrect insertion of adapter to the device programmer ZIF soc et or device to the
adapter ZIF soc et can damage the programmed device.
To ta e out the device push the top of adapter ZIF soc et and remove device from it.
When you finish wor with adapter, remove it from the device programmer ZIF soc et.
Do not directly touch the pins of the adapter and adapter ZIF soc et, because dirt may cause errors during
programming of device.
For handling with the device we recommended to use a vacuum pic up tool.
If programming yields isn't 100% when using programming adapter or if some unreliability appears, try to
connect one 22nF-100nF multilayer capacitor (that meet the EIA X7R or Z5U specification) between leads of
adapter connected to pins VCC and GND pins of programmed chip.
Software note
If software version, you're using currently, doesn't contain support for this programming adapter, please
download the latest version of software - Regular or OnDemand - from our web site.

Accepted package(s)
SOIC16