Elnec 70-0915 User manual

DIL24W/TSSOP24 ZIF 170mil
(ord.no. 70-0915)
universal adapter, assigned for TSSOP devices up to
24 pins (for example EM Microelectronic EM6xxx
series, AM /Anachip/Atmel/Gould/ CT PLD)
operation (mechanical) life of Z F socket - 10.000
actuations
made in Slovakia
Ord. no 70-0915
Socket ZIF TSSOP24, open top type
Bottom 2 rows, 2x 12 pins, square, 0 6x0 6mm, rows spacing
600mil
Class Universal
Subclass DIL/(T)SSOP
Adapter manual
nsert adapter to the device programmer Z F socket according to the picture placed near of it. f you have
some doubts about orientation of this adapter in device programmer Z F socket, it is valid general rule, the
orientation of the text of title is the same as the text on the top of the device programmer.
Push the top of adapter Z F socket to open it. nsert the device into the adapter Z F socket. The right position
of the programmed device in adapter Z F socket is show at picture near (mainly left above) the adapter Z F
socket. Then release adapter Z F socket. f you use this adapter for devices with less than 24 pins, then place
device to the bottom edge of adapter Z Fsocket. Upper contacts stay unconnected.
Visually check interconnection between device and adapter Z F socket. f everything looks OK, the device is
ready for programming.
Be careful, because the incorrect insertion of adapter to the device programmer Z F socket or device to the
adapter Z F socket can damage the programmed device.
To take out the device push the top of adapter Z F socket and remove device from it.
When you finish work with adapter, remove it from the device programmer Z F socket.
Do not directly touch the pins of the adapter and adapter Z F socket, because dirt may cause errors during
programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
f programming yields isn't 100% when using programming adapter or if some unreliability appears, try to
connect one 22nF-100nF multilayer capacitor (that meet the E A X7R or Z5U specification) between leads of
adapter connected to pins VCC and GND pins of programmed chip.
Software note
f software version, you're using currently, doesn't contain support for this programming adapter, please
download the latest version of software - Regular or OnDemand - from our web site.

Accepted package(s)
TSSOP8
TSSOP14
TSSOP16

TSSOP20
TSSOP24