Elo TouchSystems EMV Cradle for Ingenico RP457c User manual

Revision A
P/N E748012
www.elotouch.com
© 2018 Elo Touch Solutions, Inc. All rights reserved.
The information in this document is subject to change without notice. Elo Touch Solutions, Inc. and its Affiliates (collectively “Elo”) makes no
representations or warranties with respect to the contents herein, and specifically disclaims any implied warranties of merchantability or fitness
for a particular purpose. Elo reserves the right to revise this publication and to make changes from time to time in the content hereof without
obligation of Elo to notify any person of such revisions or changes.
No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or
computer language, in any form or by any means, including, but not limited to, electronic, magnetic, optical, chemical, manual, or otherwise
without prior written permission of Elo Touch Solutions, Inc.
Elo (logo) and Elo Touch Solutions are trademarks of Elo and its Affiliates.
North America
800-ELO-TOUCH
Tel [phone]
Fax [phone]
[email protected]
Europe
Tel [phone]
Fax [phone]
[email protected]
Asia-Pacific
Tel [phone]
Fax [phone]
[email protected]
Latin America
Tel [phone]
EloSales.LAT[email protected]
Elo Touch Solutions Technical Support
Online self-help:
www.elotouch.com/support
Quick Installation Guide
EMV Cradle for
Ingenico RP457c
Revision A
P/N E748012
1x
1x USB cable
1x
4x

Please go to www.elotouch.com/support to verify you have the latest drivers before installing this device.
Installation
Slide cover bracket over RP457c and ensure mounting holes line up
Connect USB cable to RP457c
Secure cover to bracket using two screws.
1
2
3
4
5
6
Remove the peripheral cover from the touch display and secure bracket with two screws
Connect USB cable touch display
Slide RP457c into bracket and verify each edge engages with bracket