ELPRO EL-CO-S001 User manual

1
SDI TO HDMI CONVERTER
Elpro Video Labs Ed.1 October 2013
ITEM NO.: EL-CO-S001
The device EL-CO-S001 converts a signal from 3G/HD/SD-SDI to HDMI enabling the users to use cost
effective HDMI display to SDI based equipment. It supports up to eight embedded audio channels.
The application can include the HD CCTV HD-SDI camera and broadcast video monitoring.
Features:
Support SDI (SMPTE 259M), HD-SDI (SMPTE 292M), 3G-SDI (SMPTE 424M).
Support video signal NTSC, PAL, 720p, 1080i, 1080p.
Support HDMI 7.1 Channel audio.
Built in SDI input equalizer to increase the working distance and signal reliability.
SDI Loop Out with Retiming function to have the best output quality.
Installation:

2
Reco end Cable:
High quality 75Ω oaxial able is recommended. Low quality coaxial cable may cause
signal loss and affect transmission distance and reliability.
Working Distance:
LED Indication:
GREEN Power
BLUE SDI signal lock
Panel View:
Trouble Shooting:
HDMI output resolution and frequency is same as SDI input. If your TV monitor not support
SDI input resolution and frequency, then it won’t have picture at the monitor. .
For example: Under HD-SDI camera application, if your TV monitor not support
1080p@25Hz or 1080p@30Hz, then the monitor won’t display.
Please adjust your HD-SDI camera output resolution to 1080i or 720p.
Specification:
ITEM NO. EL- O-S001
SDI Standard / Protocol
SDI (SMPTE 259M), HD-SDI (SMPTE 292M), 3G-SDI (SMPTE
424M)
Resolution
NTS (480i), PAL (576i),
720p@50/59.94/60Hz,
1080i@50/59.94/60Hz,
1080p@23.98/24/29.97/30/50/59.94/60Hz
SDI Input onnector BN 75Ω
SDI Output onnector BN 75Ω
HDMI Output onnector
HDMI Type A
Power onsumption 750mA (Max)
Power Supply Switching D 5V 1AMP
Temperature Operation: 0 to 55°, Storage: -20 to 85°, Humidity: up to 95%
Dimensions 67 x 110 x 27 (mm)
Weight 200 g
Max. distance via high quality 75Ω oaxial able ( Belden 1694A RG6U Testing)
SD resolution (270Mbps) 300 m
HD resolution (1.45Gbps) 100 m
Full HD resolution (2.97Gbps) 50 m