Eltako GFVS-Touch IV User manual

Quick Start Guide
Eltako GFVS-Touch IV
© 2017 ELTAKO GmbH

Quick Start Guide Eltako GFVS-Touch IV
2
Contents
1. Scope of supply........................................................................................................................ 4
2. Technical data........................................................................................................................... 4
3. Connections on the Eltako GFVS-Touch IV............................................................................ 5
4. First start-up.............................................................................................................................. 7
4.1.1 Operation........................................................................................................................................ 8
4.1.2 Right mouse button........................................................................................................................ 8
4.1.3 Screen keyboard ............................................................................................................................ 8
4.1.4 Volume control ............................................................................................................................... 9
4.2 Menu................................................................................................................................................ 9
4.2.1 Eltako GFVS 4.0 software .............................................................................................................. 9
4.2.2 PCT 14............................................................................................................................................. 9
4.2.3 GFVS 4.0 settings........................................................................................................................... 9
4.2.4 BSC-BAP finder............................................................................................................................ 11
4.2.5 Remote settings ........................................................................................................................... 11
4.2.7 Date/time....................................................................................................................................... 12
4.2.8 Select language............................................................................................................................ 12
4.3 Presettings ........................................................................................................................ 13
4.3.1 License.......................................................................................................................................... 13
4.3.2 Database....................................................................................................................................... 13
4.3.3 Network......................................................................................................................................... 13
5. Eltako quickcon®technology................................................................................................. 15
6. System tools............................................................................................................................ 21
6.1 GFVS tools......................................................................................................................... 21
6.1.1 Save, restore or delete database................................................................................................. 22
6.1.2 System backup............................................................................................................................. 24
6.1.3 Delete license in case of license problems ................................................................................ 26
6.1.4 Restore factory settings............................................................................................................... 27
6.1.5 GFVS settings............................................................................................................................... 29
6.1.6 GFVS update................................................................................................................................. 30
6.2 BAP Finder.................................................................................................................................... 30
6.3 CodeMeter ......................................................................................................................... 31
6.4 Change web code ............................................................................................................. 31
6.5 Shuttle tools.................................................................................................................................. 31
7. System settings ...................................................................................................................... 32
7.1 Network settings............................................................................................................... 32
7.2 Remote settings................................................................................................................ 33
7.3 Date/time............................................................................................................................ 33

Quick Start Guide Eltako GFVS-Touch IV
3
7.4 Search monitor.................................................................................................................. 34
7.5 Display resolution............................................................................................................. 34
7.6 OSD keyboard................................................................................................................... 35
7.7 Technical Support (TeamViewer) .................................................................................... 35
7.8 Data transfer...................................................................................................................... 36
8. Switch off Eltako GFVS-Touch IV.......................................................................................... 37
9. Notes on continuous operation............................................................................................. 37
10. Conformity............................................................................................................................... 37
11. Technical Support................................................................................................................... 38

Quick Start Guide Eltako GFVS-Touch IV
4
General
Please read these instructions carefully to avoid problems when using the product. Eltako GmbH will not
assume any liability for defects arising from the improper use or non-observance of the instructions for use
(incorrect installation, incorrect start-up, maloperation, etc.).
The intended use of the GFVS-Touch IV with LAN or WLAN communication is the visualisation of sensor
information, actuator switch states and meter consumption data and the control of actuators.
1. Scope of supply
•Eltako GFVS-Touch IV
•External power supply unit
•Ethernet connecting cable 2 m RJ45
•Resources CD
•Eltako GFVS 4.0 software packet incl. license key
•Quick start guide (this manual)
•Stylus pen (on display, see Section 3.17)
2. Technical data
Processor: Intel® Celeron 3865U Dual Core 2 x 1.8 GHz
RAM: 4 GB RAM
Hard disk drive: 120 GB SSD
Display: 39.6 cm (15.6”) Touchscreen (1366 x 768)
Graphics function: Intel® HD Graphics Dynamic Video Memory Technology
Sound card: IDT92HD81 Audio Codec
Interfaces: 1 x VGA video output
1 x LAN (Gigabit Ethernet)
2 x USB 3.0
4 x USB 2.0
1 x HDMI
1 x WLAN 802.11 b/g/n
1 x line out
1 x mic in
Other components integrated: FAM-USB
2.0 Megapixel Webcam
2 x 2 W loudspeakers
VESA holder - Compatible with 100x100 mm
Software and applications: Eltako GFVS 4.0
PCT 14 software
Backup and restore function

Quick Start Guide Eltako GFVS-Touch IV
5
3. Connections on the Eltako GFVS-Touch IV
Figure 1: Front view
Figure 2: Rear

Quick Start Guide Eltako GFVS-Touch IV
6
Figure 3: Connections left/right
1 Touchscreen LCD display
2 Webcam
3 Microphone
4 LED power indicator
5 Hard disk LED indicator
6 Stereo loudspeakers
7 VGA output
8 Power supply input
9 USB 2.0 ports
10 Network port
11 USB 3.0 ports
12 HDMI port
13 Headphones/line out socket
14 Microphone input
15 Stand/carrier handle
16 On/Off button
17 Touchscreen stylus pen
18 SD card reader
19 USB 2.0 ports
20 Connection prewired for EnOcean antenna

Quick Start Guide Eltako GFVS-Touch IV
7
4. First start-up
Start-up
Plug the external power supply unit into a 230 V socket and connect it to the GFVS-Touch IV.
The blue LED indicates power supply.
You can connect a keyboard and mouse to the USB ports to configure the GFVS software.
Alternatively, you can connect a PC via remote control (VNC) via network to the Eltako GFVS-
Touch IV and carry out the configuration.
We advise you to issue a fixed IP address to use the cross-over cable, see menu option 4.2.6.
Then you can switch on the Eltako GFVS-Touch IV. During the run-up, you will see the dialog below:
As required, you can switch to recovery mode to reset the system to factory settings. If you make no
subsequent input, the Eltako GFVS-Touch IV restarts after 10 seconds.
The Eltako GFVS 4.0 software is already installed and starts automatically after switch-on:
Figure 4: Start view
Figure 5: Start the Eltako GFVS 4.0 software

Quick Start Guide Eltako GFVS-Touch IV
8
The Eltako GFVS 4.0 software starts.
A task bar appears at the bottom of the screen. Icons are displayed for network connection as well as the
date and time.
4.1.1 Operation
The touch screen can be operated just by finger pressure without a mouse or keyboard. At the top left on
the enclosure there is a stylus pen to make more detailed inputs. A virtual keyboard can be opened using
the menu. Press an object for longer to open the Context menu.
4.1.2 Right mouse button
If you press the screen for longer, the system recognises it as a right-click. This opens the GFVS menu.
Alternatively, click on the time and date section and then on the desktop. This also opens the GFVS
menu.
4.1.3 Screen keyboard
The on-screen keyboard opens from “Menu - System settings - OSD keyboard”.
Figure 7: OSD keyboard
Figure 6: The Eltako GFVS 4.0 software starts

Quick Start Guide Eltako GFVS-Touch IV
9
4.1.4 Volume control
Right-click on the time and date section to open the volume control.
Figure 8: Volume control
4.2 Menu
Open the GFVS menu by right-clicking on the background.
4.2.1 Eltako GFVS 4.0 software
If required, the Eltako GFVS 4.0 software can be started by clicking the menu option “GFVS 4.0”. Open a
detailed instruction manual using “Manuals - Eltako GFVS 4.0 manual”.
4.2.2 PCT 14
The PCT 14 (version 7.6) is integrated In the GFVS Version 4.0 and higher.
4.2.3 GFVS 4.0 settings
The option “Create log files” creates log files which track any errors and provide assistance to Technical
Support.
Adapt the size of the overview window to the connected PC client using “Overview size”.
“TeamViewer Autostart” connects the TeamViewer to the Autostart routine. A reboot is needed to
accept the setting.
Figure 9: Eltako GFVS-Touch IV menu

Quick Start Guide Eltako GFVS-Touch IV
10
Figure 10: Program settings
“Hide main window” starts the Eltako GFVS 4.0 software with the overview window. The buttons in the
main window are integrated in the “Configuration” menu.
Figure 11: Configuration menu

Quick Start Guide Eltako GFVS-Touch IV
11
4.2.4 BSC-BAP finder
The BSC-BAP finder is for configuring TF-IP-Con, BAP, BIER or IPG170(P) and is opened with menu
option “System tools - BSC-BAP Finder”.Use the menu option “Manuals - BSC-BAP Finder” to open a
detailed instruction manual.
4.2.5 Remote settings
A device-specific password was set in the as-delivered state. It is located on the rear of the device. It
can be overwritten by entering a new password.
Figure 12: Remote settings
When the password is reset, the MAC address of the active network unit is set.
Note: Change the preconfigured password immediately or deactivate the service so that
no unauthorised person can connect to the system.
Figure 13: MAC address of Ethernet interface

Quick Start Guide Eltako GFVS-Touch IV
12
4.2.6 Network settings
The configuration of network cards can be adapted using “System settings - Network settings”.
The LAN interface is set up to operate in a network with DHCP.
4.2.7 Date/time
You can change the date and time in the dialog under the menu option “System settings - Date/time”.
4.2.8 Select language
Change the language by using the menu option “System settings - Select language”. The GFVS must
be connected to change the language.
Figure 14: Network settings
Figure 15: Time and date settings
Figure 16: Language selection

Quick Start Guide Eltako GFVS-Touch IV
13
4.3 Presettings
4.3.1 License
The Eltako GFVS-Touch is delivered with an activated Eltako GFVS 4.0 license. If it is necessary to
carry out a repeat activation, an Eltako GFVS 4.0 license key is included. However, it must be
released by Eltako before activation. Contact Technical Support for this.
4.3.2 Database
PostgreSQL database is set up for data management.
4.3.3 Network
The LAN interface is set up to operate in a network with DHCP.
Go to [Link information] and an information window appears containing all active interface interfaces and
their settings.
Figure 17: Network connection

Quick Start Guide Eltako GFVS-Touch IV
14
Figure 18: Connection information

Quick Start Guide Eltako GFVS-Touch IV
15
5. Eltako quickcon®technology
This allows the simple connection of an Eltako GFVS Server to a Mobile Client without any knowledge of
how to handle IP address translations (e.g. DynDNS) or port blocking.
Important: Using the app creates data traffic which may entail additional costs
independent of the mobile radio contract.
Download the Eltako GFVS Tablet or the Eltako GFVS Mobile Client from the App Shop of your mobile
radio system (iPhone->iTunes, Android -> Google Play) and install it.
Configuration of Mobile Client and Eltako GFVS Server
First create a profile in the Eltako GFVS 4.0 software using “Configuration -Client - Profile manager”.
This defines the rights of the Mobile Client in the Eltako GVFS 4.0 software.
Figure 19: Use of encrypted links without port blocking or IP address translation
Figure 20: Profile manager

Quick Start Guide Eltako GFVS-Touch IV
16
Then create a new device in the Eltako GFVS 4.0 software using “Configuration - Client - Eltako GFVS 4.0
Mobile”.
Figure 21: Create Mobile Client
GFVS Client
Then assign the user to the corresponding access profile and save your settings. Also enter the
name of the smartphone or tablet.
Right-click on the client set up and then on “Show QR code”.
Figure 22: Name Mobile Client

Quick Start Guide Eltako GFVS-Touch IV
17
Figure 23: Assign Mobile profile
Open the GFA2 app on the appropriate device and go to “Create profile”.
Drag the bright area of the display over the displayed QR code of the GFVS server. As soon as the GFA2
recognises the QR code, the screen switches to the access profiles. Swipe left on the new access profile
set up to access the menu and rename the profile.
Figure 24: Create a profile

Quick Start Guide Eltako GFVS-Touch IV
18
Figure 25: Create a profile
Highlight the “Eltako GFVS 4.0” text to rename the profile.
Figure 26: Rename profile

Quick Start Guide Eltako GFVS-Touch IV
19
Figure 27: Rename profile
Click the icon to return to the profile overview.
Access your GFVS server by tapping the corresponding profile.
Figure 28: Select Profile

Quick Start Guide Eltako GFVS-Touch IV
20
Figure 29: Server access