EMA M-CX-EN-V1.5 User manual

M-CX-EN-V1.5
3
Capacitive proximity sensors can sense metals and non-metals, such
as wood, ceramics, water, oil, and etc. They are mainly used to detect
liquids, solids in funnels, storage tanks, and granaries.

5
4
sensor
Type & Dimension

7
6
Sensitivity

9
8
Min.Max.
Sensitivity
too tight
In order to ensure the reliable operation for a long time, the following
regular examinations should be performed:
Check the attached wires and connecting parts if any looseness bad
contact or wire disconnected exists.
Check if there is any accumulation of metallic powder attached.
Installation
S-Sensing range; D-Diameter of sensor.
Maintenance

11
M-CD-EN-V1.5
operating.
① wire mounting ② screws mounting

12 13
＞20mm
empty adjustment full adjustment
（Fig.1） （Fig.2）
During the calibration No object or interference source
is behind the pipe.
When setting empty adjustment, keep the medium away
sensing face over 20mm.
Setting Steps: empty adjustment(Fig.1) full adjustment(Fig.2)
PNP mode of connection
NPN mode of connection

14 15
Default setting is under Unlock mode when power is ON.
The user can calibrate empty adjustment and full
adjustment directly. The user can also lock the product in
manual if needed.

16
keep flashing slowly, than