EMAC IBX-200-VX800 User manual

1
 
 !"                 
# 

IBX-200-VX800
Quick Installation Guide
Version 1.0
May. 21, 2009
Package Contents
IBX-200-VX800 package includes the following items:
1 x IBX-200-VX800
1 x screw set
1 x 5VDC output with AC-DC adaptor
1 x 2dbi wireless antenna
(IBX-200-VX800-W-R10/1GZ/1GB
IBX-200-VX800-W-R10/500/512MB only)
1 x QIG (Quick Installation Guide)
1 x Utility CD

2
Specifications
CPU: VIA Eden ULV 1GHz/500MHz
System Chipset: VIA VX800
BIOS: AMI BIOS label
System memory: Onboard 1GB/512MB DDR2 667 MHz DRAM
Ethernet:
PCIe interface Realtek RTL8111CP GbE controller
I/O Interface:
2 x RS-232 (2 on rear)
4 x USB2.0 (2 on rear, 2 front panel)
Expansion:
1 x PCIe mini card Slot for Wireless LAN module
(
IBX-200-VX800-W-R10/1GZ/1GB
IBX-200-VX800-W-R10/500/512MB only)
Storage: 1 x CompactFlash Type II slot
Super I/O: Fintek F81216AD
Display: CRT interface integrated in VX800 with VGA port
Audio: Line In/ Mic Out by VIA VT1708 supports 7.1 channel HD
Audio Codec
Watchdog timer: Software programmable 1-255 sec.
Power supply: 5V DC input, AT/ATX mode
Chassis Construction: Aluminum Alloy, ABS
Power Consumption:
5V@ 2.9A, with 3D Mark 2001SE
Operating Temperature: 0 ~ 50°C
Operating shock: Half-sine wave shock 3G;11ms;3 shocks per axis
Operating Vibration: MIL-STD-810F 514.5C-2
Operating Humidity: 5%~95% non-condensing
Dimension: 125mm x 120mm x 44.4mm
Weight: NW: 480g, GW:1.5Kg
Mounting: Desktop, VESA 75 mount with VESA mount adaptor
EMC/Safety: CE, FCC class A

Ordering Information
IBX-200-VX800-R10/1GZ/1GB:

!""#$%%&'"#(%!"#!"#
IBX-200-VX800-W-R10/1GZ/1GB:

!""#$%%&'"#$)*'+,-
#(%!"#!"#

IBX-200-VX800-R10/500/512MB:
(.
 !""#('.$%%&'"#(%
!"#!"#

4
Jumpers setting and Connectors
LABEL FUNCTION
J_CMOS1 CMOS state setting jumper
JP3 AT/ATX Mode setting jumper
CF_MS_SEL1
CF Master/Slave setting switch
DC_JACK1 Power Supply Input
VGA1 VGA 15-pin Female Connector
V_USB_1
V_USB_2 USB Port Connector
LAN1 RJ45 LAN Connector
COM1
COM2 External Serial Port for DB-9 Connectors
USB_1
USB_2 External USB Port Connector
FP_MIC1
FP_LOUT External Audio Connector
SATA1 Serial ATA Connectors
CF1 Internal CF Card Connector
MINI-PCIE1 Internal Mini-PCIe Connector
BT1 Battery connector
PWR_BTN1 Power button connector
WLAN_LED1 Internal Wireless LED connector
JSPI1 Internal Flash SPI ROM connector

5
J_CMOS1 : Clear CMOS Setup jumper
J_CMOS1 DESCRIPTION
1-2
(default)*
Keep CMOS Setup
(Normal Operation)
Short 2-3 Clear CMOS Setup
JP3: AT/ATX Mode setting jumper
JP3 DESCRIPTION
Open
AT
Short 1-2
(default)*
ATX
CF_MS_SEL1:
CF Master/Slave setting switch
Left Right
Master
(default)*
Slave
COM1,COM2:
External Serial Port for DB-9 Connectors
PIN DESCRIPTION PIN DESCRIPTION
1 DCD# 6DSR#
2RXD 7 RTS#
3TXD 8 CTS#
4DTR# 9 RI#
5GND 10 NC
WLAN_LED1:
Internal Wireless LED connector
WLAN_LED1 DESCRIPTION
1 GND
2 VCC (+3.3V )

6
CF1: Internal CF Card Connector
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1 GND 26 CD1#
2 D3 27 D11
3 D4 28 D12
4 D5 29 D13
5 D6 30 D14
6 D7 31 D15
7 CE# 32 CE2#
8 A10 33 VS1#
9 OE# 34 IOR#
10 A9 35 IOW#
11 A8 36 WE#
12 A7 37 IRQ
13 VCC1 38 VCC2
14 A6 39 CSEL#
15 A5 40 VS2#
16 A4 41 RESET#
17 A3 42 WAIT#
18 A2 43 INPACK#
19 A1 44 REG#
20 A0 45 BVD2
21 D0 46 BVD1
22 D1 47 D8
23 D2 48 D9
24 IOCS16# 49 D10
25 CD2# 50 GND2
JSPI1:Internal Flash SPI ROM connector
PIN NO. DESCRIPTION
PIN NO. DESCRIPTION
1 3.3V 2 GND
3 CS0# 4 CLK
5 SO0 6 SI
7 N/C 8 N/C

7
Board Layout: Jumper and Connector Locations

8

9

10
Dimensions (Unit: mm)