Furniture of America CM2527 User manual

MODEL #
CM2527
Questions?
GIVE US CALL: 1-888-980-5122
MON-FRI 8:30AM - 5:30PM (PST)
Phillips Screwdriver
(Not Included)
(Included)
Allen Wrench
VERSION # 20-02-17
Recommended
2 - People
EASY
The Assembly Rating is a
5-point system showing the
level of effort needed to
assemble a specific product.
DIFFICULT
1 / 13

Thank you for your purchase!
We hope you enjoy this new addition to your home for many years to come.
Our commitment to providing quality products does not simply end when you purchase
our product. We fully stand behind our products from start to finish. Our customer
service department is available Monday – Friday 8:30 AM – 5:30 PM Pacific and can
help with assembly questions as well as, if necessary, replacing damaged or missing
parts. To help expedite our service, please have these assembly instructions readily
available, along with your order receipt.
E-MAIL
[e-mail]
Furniture of America
WEBSITE
www.foagroup.com
FOA Intro
FurnitureOfAmerica
foagroup
Monday to Friday
8:30AM- 5:30PM (PST)
Consumer Hotline
Toll-Free 1-888-980-5122
Prep Time!
Please review the assembly instructions and all
diagrams prior to assembling. Arrange parts as
recommended on Page 7 and group identical
hardware together to make assembling easier.
Check out our Quick Tips!
We recommend reviewing the pre-assembly
handouts. Even experts need a refresher now and
then!
Are you missing anything?
Double-check all parts, hardware and
accessories listed on Page 6 are
accounted for.
Should we send any replacements?
Are there any irregularities or flaws in the
parts? We can send replacements!
CHECK
BEFORE STARTING
2/ X13

PRE ASSEMBLY
INTRODUCTION
Suitable Location
Assembling near the area of the
intended location is highly
recommended.
Avoid Scratches
Use cardboard, blankets or a
carpeted area while assembling
furniture to prevent scratches.
Teamwork
ALWAYS have at least two people
to help with transporting and
assembling the product to avoid
potential injury and/or damage.
Flat Surface
Make sure the furniture rests on
a flat and level surface with each
leg evenly touching the floor.
Sufficient Space
Make sure you have enough
space to move around during the
assembly.
We understand building ready-to-assemble furniture can be a challenging
experience for some. To help avoid confusion, we have provided some helpful
tips that may speed up the process.
3/ 13

4/ XXXXXXX13

#1
Front Upper
Side Rails Front
Guardaril Bars
Front Low
Side Rails
Back Upper
Side Panel
Top Side Panel Bottom Side Panel Low Side Rails
Back
Guardaril Bars
Guardail
Reinforce Bars
Ladder(R) Slats
Ladder Steps
BUNKBED
CM2527
2pcs #2 2pcs #3 1pc #4 1pc
#5 1pc
Front
Guardaril Bars Ladder(L)
#6 1pc #7 1pc #8 2pcs
#9 1pc #101pc #111pc #1212pcs
#13 5pcs #14 4pcs
5 / 13

Bolt Ø5/16 X 1" Bolt 1/4 X 1-7/8"
Screw M3 x 18mm
#13
#8
#5
#1
#1
#2
#4
#9
#6
#13
#11
#14
#10
Bolt Ø1/4 X 1-3/8"
Lock
Washer 5/16"
Allen
Wrench 4mm
Screw M4 x 30mm Screw M4 x 62mm
Pat 3/4" x 3/4"
#7
#3
#A 16pcs #B 21pcs #C 8pcs #D 4pcs
#E 16pcs
Flat Washer Ø5/16"
Dowel Ø3/4" x 2-3/4"
#F 31pcs #G 8pcs #H 1pc
#I 24pcs #K 16pcs #L 8pcs
Exploded View
#12
#12
6 / 13

Carton Disignotion Part Hardware
Top Side Panel # 1
CM2527-1
Bottom Side Panel # 2
CM2527-2
CM2527-3
Low Side Rails # 3
Front Low Side Rails # 4
Front Upper Side Rails
Front Guardaril Bars
Back Upper Side Panel
Back Guardaril Bars
# 5
# 6
# 7
# 8
Front Guardaril Bars
Guardail Reinforce Bars
Ladder(R)
Ladder Steps
Ladder(L)
# 9
# 10
# 11
# 12
Slats
# 13
# 14
#A x 16 pcs
#B x 21 pcs
#C x 8 pcs
#D x 4 pcs
#E x 16 pcs
#F x 31 pcs
#G x 8 pcs
#H x 1 pc
#I x 24 pcs
#K x 16 pcs
#L x 8 pcs
CM-BK903 is packed in 2 cases
7 / 13

#1
#E
#H
#A
#F
#1
#4
#3
#E
#H
#A
#F
ASSEMBLY INSTRUCTIONS
1
#1 x 2pcsPart
#3 x 1pc
Part
#4 x 1pcPart
#A x 8pcs
Hardware #E x 8pcs
Hardware
#F x 8pcsHardware
2
#2 2pcsPart
#5 1pcPart
#6 1pcPart
#A 8pcs
Hardware
#E 8pcs
Hardware
#F 8pcs
Hardware
#2
#2
#6
#5
8 / 13
Align side rails (#3,4) to the top side panels (#1), then secure by using
bolts (#A).
Align side rails (#5,6) to the bottom
side panels (#2).

#B
#H
#13
#9
#7
#8
#10
#11
#14
#H
#C
#F
3
#7 x 1pcPart
#8 x 2pcs
Part
#9 x 1pcPart
#B x 10pcs
Hardware
#F x 10pcs
Hardware
#13 x 5pcsPart
4
#10 x 1pc
Part
#C x 8pcs
Hardware
#11 x 1pc
Part
#14 x 4pcsPart
ASSEMBLY INSTRUCTIONS
9 / 13
Align reinforce bars (#13) to the guardrail bars (#7,8,9),
then secure by using bolts (#B) with washers (#F).
Align ladder rungs (#14) to the ladder rails
(#10,11), then secure by using bolts (#C).

6
5
#Gx 8pcs
Hardware
#K x 16pcs
Hardware
ASSEMBLY INSTRUCTIONS
#K
#G
#B
#H
#F
#B x 5pcs
Hardware
#F x 5pcs
Hardware
10 / 13
Align brackets (#G) to the bed, then secure
by using screws (#K).
Secure reinforce bars (#13) to bed by using bolts (#B)
with washers (#F).

#K
#Lx 8pcs
Hardware
#D
8
#Dx 4pcs
Hardware
7
ASSEMBLY INSTRUCTIONS
11 / 13
Insert dowels (#D) to the bottom bunk, then align
top bunk to the bottom bunk.
Secure bunk beds by using screws (#K).

#I
9
10
#I x 24pcsHardware
#12 x 12pcsPart
ASSEMBLY INSTRUCTIONS
#B
#B x 6pcs
Hardware
#H
12 / 13
Align slats (#12) to bunk bed,
then secure by using screws (#I).
Align ladder to the bunk bed, then
secure by using bolts (#B).

1
3
/13