Empire EARS AUDIO User manual

EMPIRE EARS AUDIO GUIDE
GETTING TO KNOW YOUR IN-EARS
HOW TO WEAR
Warning: Please turn the volume down on source before inserting IEM. Don’t take chances with permanent
irreversible hearing loss. Turn it down.
Note: Handle IEMS with care. They are breakable.
Step 1
Turn the CIEM forward, then
gently insert it into your ear
canal.
Step 2
Gently rock in-ear back and
forth, until completely snug
in the ear.
Step 3
Secure cable behind ear.
Step 4
Cinch cable for best
isolation.
For Universal IEMS
Before insertion, be sure to secure tip onto IEM. If using final Audio Type E tips, squeeze tip before
insertion into ear.
DO
1. Clean after each use. Wax buildup damages drivers and they will
need to be replaced. This is not covered under warranty.
2. Store in Empire Ears protective case when in-ears are not in use..
3. Read full warranty info. The more informed you are, the better
you can take care of your in-ears. With proper care your in-ears
can last for many years.
DON’T
1. Expose device to moisture.
2. Remove IEM by pulling on cable.
3. Wear IEM if it has microfractures, as it can break during use.
4. Allow IEM to hit hard surfaces, or knock into each other, as this
can create microfractures or break the device.
5. Attempt to fix, alter, or disassemble device. Doing so will void all
warranties.

EMPIRE EARS AUDIO GUIDE CONT.
LISTEN RESPONSIBLY
HOW TO ATTACH
HOW TO DETACH
HOW TO CARE
ATTACHING & DETACHING CABLE
CLEANING
Locate the sound bores at the end
of the canal on your IEM. Using the
loop side of cleaning tool, point
your IEM downwards, and begin to
scoop out any internal debris.
POLISHING
Use only microfiber cloths or non-
alcoholic wipes to clean the shell.
Never submerge IEM in liquids.
SCRUBBING
Debris will begin to surface and
may leave particles in surrounding
areas. Use the brush end of the
tool to scrub o any remaining
debris.
STEP 1
Match the right ear with the right cable (red dot).
STEP 2
Insert the cable by sliding it until it feels
snug. The colored dot on top of the
connector should always point upwards.
This indicates that the positive and negative
are inserted correctly.
STEP 3
Follow same process for left side (blue dot).
WRAP & STORE
Cinch the cable all the way up,
then loosely wrap it around your
four fingers. Carefully store your
neatly wrapped Empire IEMS inside
your carrying case.
Sound
Pressure Level
DB(A)
Permissable Noise
Exposure Duration
(Per Day)
90 8 hrs
95 4 hrs
100 2 hrs
105 1 hrs
110 30 min
Source SPL (dBA)
Faintest Audible Sound 0
Whisper 20
Quiet Residence 30
Soft Stereo in Residence 40
Speech Range 50-70
Cafeteria 80
Pneumatic Jackhammer 90
Loud Crowd Noise 100
Accelerating Motorcycle 100
Rock Concert 120
Jet Engine
(75 Feet away) 140
HOW TO INSTALL TIPS
To install tips, slide your selected tip
over the nozzle until it feels snug.
To remove, gently twist and pull
from nozzle.
Grasp the base of cable by port and gently pull
outward while wiggling back and forth in an up
and down motion.
DO NOT attempt to remove by pulling on the
cable or you might damage the cable port and
device.
Inserting The final Audio Type E Tips
All of our custom IEMS use recessed sockets. When using an aftermarket
cable, please ensure that it’s designed for a recessive socket. If not, you
risk damaging your device, if it doesn’t securely fit.

EMPIRE EARS AUDIO GUIDE CONT.
WARRANTY
UNIVERSAL PRODUCTS
Defects Or Workmanship Warranty
Empire custom products are warranted against material defects and workmanship defects for a period of twenty-four (24)
months, and twelve (12) months for universal products, from the original shipping date or manufacture date, whichever is later.
This warranty does not cover:
• Cables and accessories.
• Loss and damage.
• Problems resulting from using aftermarket cables and accessories.
• Abuse, misuse, accidents, improper storage, and usage under conditions which the product is not intended for.
• Problems resulting from any unauthorized repairs or modifications to the product.
• Wax build up or moisture issues.
• Deterioration of product’s color and/or physical condition resulting from normal wear and tear; such deterioration is not
considered defect.
• Shipping and handling
Voiding Limited Warranty
Tampering with your Empire Ear product, including modifications or disassembly, or attempts to disassemble or repair, by you
or any person or company other than our authorized service facility, will automatically void all warranties.
CUSTOM PRODUCTS
Limited Manufacturer’s Warranty
Limited Thirty (30) Day Fit Warranty – Custom Products
• At our discretion, Empire Ears will repair or remake custom products with fit problems up to two (2) times within thirty (30)
days from the original shipping date or manufacture date, whichever is later, at no additional cost.
• Under this warranty, all fit issue remakes will be remade according to the original purchase color selected ONLY. Color
changes will be permitted ONLY if Empire Ears has made a manufacturing error or the color does not match the original
purchase order.
• Remake service is not available simply to change the color of your custom in-ears. Therefore, please select your model
and colors carefully before making your purchase.
• Fit problem remake requests that arise after the thirty (30) day period will incur a remake fee.
• Warranty does not include shipping and handling fees.
Repair or remake fit problems covered under this warranty include:
• Fit is too tight, tall, low, or deep.
• Loose fit or poor seal.
• The helix area is too thick or wide.
• Uncomfortable or painful to wear.
• Does not sit properly in the ear.