Endor Fantec ClubSport BMW M3 GT2 User manual

TUNING OPTIONS
QuickGuide
www.fanatec.com
Tuning Button
FunkySwitch
Fanatec®is a registered trademark of Endor AG
Designed and developed by Endor AG in Germany
E.ON-Allee 3 - 84036 Landshut - Germany
Telephone: [phone] Fax: [phone]
Email: [email protected]
Internet: www.fanatec.com - www.endor.ag
In order to enter the Tuning Menu, press the Tuning button. To
navigate inside the menu, use the right FunkySwitch™. Press it up
or down to access 5 setup proles. Press FunkySwitch™ right or
left to go through the various tuning options and rotate the
FunkySwitch™ to change option values.
Tuning Button
CENTRE CALIBRATION
SHIFTER CALIBRATION
In order to enter shifter calibration mode, simultaneously press
the Tuning Menu Button and the button highlighted below.
If a centre calibration is needed (e.g: after rmware update
of ClubSport Wheel Base) when using the steering wheel
you need to enter the Tuning Mutton by pressing the Tuning Menu
Button. When the Tuning Menu is active, press the analogue stick
and the FunkySwitch™ at the same time as illustrated below to
calibrate the wheel centre.

MODES
BUTTON MAPPING
PS 22
9 Touch
Pad
Button
Joy Joy
+ 26 + GSB 2*
8 L2
6 L1
12 L3
7 R2
Options 10
R1 5
D-Pad + 25
4
2
11 R3
1
3
* Game Specic Button
Tuning Button
- Remove storage pin. - Compress and hold the
Quick Release mechanism.
- Slide it on the
ClubSport Wheel Base axle.
- Insert the storage pin.
- Release the Quick Release mechanism. - Release the Quick Release mechanism.
- Compress and hold the
Quick Release mechanism.
- Place the rim face down on table.
- Align ClubSport Wheel Base axle,
to correct position.
- Slide it o the
ClubSport Wheel Base axle.
In order to switch between modes simultaneously press and hold
the two buttons highlighted below, for one second.
The wheel base LED indicates the active mode:
-Red indicates PC mode
-Blue indicates PS4™ mode*
-Purple indicates compatibility mode*
* Not applicable for every Fanatec wheel
base. Please check the individual user
manual of your Fanatec wheel base.
ATTACHING THE STEERING WHEEL DETACHING THE STEERING WHEEL