Eneo NXP-880F21 User manual

EN
User Manual
1/2.8” Network Board Camera,
1920x1080, Day&Night,
D-WDR, PoE, 12V
NXP-880F26
NXP-880F21

2
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EX-
POSE THIS PRODUCT TO RAIN OR MOISTURE. DO NOT INSERT ANY
METALLIC OBJECT THROUGH THE VENTILATION GRILLS OR OTHER
OPENNINGS ON THE EQUIPMENT.
CAUTION
EXPLANATION OF GRAPHICAL SYMBOLS
The lightning flash with arrowhead symbol, within an equilateral triangle, is in-
tended to alert the user to the presence of dangerous voltage within the products
enclosurethat maybeof sufficient magnitudeto constitutea risk of electricshock
to persons.
The exclamation point within an equilateral triangle is intended to alert the user
to the presence of important operating and maintenance (servicing)instructions
in the literature accompanying theproduct.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING: TO REDUCE THE RISK OF ELECTRICSHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICABLE PARTSINSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL

3
FCC COMPLIANCE STATEMENT
CE COMPLIANCE STATEMENT
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
WARNING
This is a Class A product. In a domestic environment this product may cause
radio interference in which case the user may be required to take adequate
measures.
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil nume
`
rique de la classe A est conforme a
´
la norme NMB-003 du
Canada.
CAUTION: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
FCC INFORMATION: This equipment has been tested and found to
comply with the limits for a Class A digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commer-
cial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the in-
struction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful in-
terference in which case the user will be required to correct the interference
at his own expense.
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) this device may not cause harmful inter-
ference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.

4
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus nearwater.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturers in-
structions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produceheat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized
plug has two blades with one wider than the other. A grounding type plug has two blades
and a third grounding prong. The wide blade or the third prong are provided for your safety,
If the provided plug does not fit into your outlet, consult an electrician for replacement of the
obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, conve-
nience receptacles, and the point where they exit from theapparatus.
11. Only use attachments/accessories specified by themanufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified
by the manufacturer, or sold with the apparatus. When a cart is used.
Use caution when moving the cart/apparatus combination to avoid in-
jury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for
long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is re-
quired when the apparatus has been damaged in any way, such as
power-supply cord or plug is damaged, liquid has been spilled or ob-
jects have fallen into the apparatus, the apparatus has been exposed to rain or moisture,
does not operate normally, or has beendropped.
15. CAUTION −THESE SERVICING INSTRUCTIONS ARE FOR USE BY QUALIFIED
SERVICE PERSONNEL ONLY. TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT
PERFORM ANY SERVICING OTHER THAN THAT CONTAINED IN THE OPERATING IN-
STRUCTIONS UNLESS YOU QRE QUALIFIED TO DOSO.
16. Use satisfy clause 2.5 of IEC60950-1/UL60950-1 or Certified/Listed Class 2 power
source only.
17. ITE is to be connected only to PoE networks without routing to the outsideplant.

5
Contents
1 Network Connection & IP assignment 6
2 Operation 7
2.1 Access from a browser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
2.2 Access from the internet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
2.3 Setting the admin password over a secure connection . . . . . . . . . . . . . 8
2.4 Live View Page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
2.5 Playback............................................................................................................................12
2.6 Network Camera Setup...................................................................................................14
2.6.1 Basic Configuration.............................................................................................14
2.6.2 Live View...............................................................................................................18
2.6.3 Video & Image......................................................................................................19
2.6.4 Audio .....................................................................................................................28
2.6.5 Event .....................................................................................................................30
2.6.6 System ..................................................................................................................54
2.7 Help....................................................................................................................................75
A Appendix 76
A.1 Troubleshooting.....................................................................................................................76
A.2 Alarm Connection.............................................................................................................77
A.3 Preventive Maintenance..................................................................................................77
A.4 System Requirement for Web Browser.........................................................................78
A.5 General Performance Considerations...........................................................................78

6
1 Network Connection & IP assignment
The eneo scanning device tool is used to locate all eneo network cameras in a local
network. The tool does not need to be installed with a setup program. The program exe-file
can be started directly from the CD with a simple double click to use the program
.
After pushing the button „Find eneo devices“ you will get a list of cameras connected to the
local network. Highlight your camera in the list and open a context menu with a click of the
right mouse button.
Select the „Editing the camera IP address“ option to open a window for setting the cameras
IP properties. When you are done click the „Activate“ button to update the camera settings.
For further information, please refer to the eneo Scan Device Tool Quick Start Guide.

7
2 Operation
The network camera can be used with Windows operating system and browsers. The rec-
ommended browsers are Internet Explorer, Safari, Firefox, Opera and Google Chrome with
Windows.
NOTE: To view streaming video in Microsoft Internet Explorer, set your browser to allow
ActiveX controls.
2.1 Access from a browser
1. Start a browser (Internet Explorer).
2. Enter the IP address or host name of the network camera in the Location/Address field
of your browser.
3. You can see a starting page. Click Live View, Playback, or Setup to enter web page.
4. The network cameras Live View page appears in yourbrowser.

8
2.2 Access from the internet
Once connected, the network camera is accessible on your local network (LAN). To access
the network camera from the Internet you must configure your broadband router to allow
incoming data traffic to the network camera. To do this, enable the NAT traversal feature,
which will attempt to automatically configure the router to allow access to the network cam-
era. This is enabled from Setup > System > Network > NAT. For more information, please
see “3.5.7 System > Network > NAT” of User’s Manual.
2.3 Setting the admin password over a secure connection
To gain access to the product, the password for the default administrator user must be set.
This is done in the “Admin Password” dialog, which is displayed when the network camera
is accessed for the setup at the first time. Enter your admin name and password, set by the
administrator.
NOTE: The default administrator user name and password is “admin”. If the password is
lost, the network camera must be reset to the factory default settings. Please see “Resetting
to the factory defaultsettings.”
To prevent network eavesdropping when setting the admin password, this can be done via
an encrypted HTTPS connection, which requires an HTTPS certificate (see NOTEbelow).
Tosetthe passwordvia a standardHTTPconnection,enteritdirectlyinthefirst dialogshown
below. To set the password via an encrypted HTTPS connection, please see “3.5.7 System
>Security > HTTPS” of User’s Manual.
NOTE: HTTPS (Hypertext Transfer Protocol over SSL) is a protocol used to encrypt the
traffic between web browsers and servers. The HTTPS certificate controls the encrypted
exchange ofinformation.

9
2.4 Live View Page
The Live Viewpagecomesinseveralscreenmodes: 1920x1080,1280x1024,1280x720(960),
1024x768, 704x480(576), 640x480(360) and 320x240. Users are allowed to select the most
suitable one out of those modes. Adjust the mode in accordance with your PC specifications
and monitoring purposes.
1) General controls
Live ViewPage PlaybackPage Setup Page Help Page
The video drop-down list allows you to select a customized or pre-
programmed video stream on the Live View page. Stream profiles are con-
figured under Setup > Basic Configuration > Video & Image. For more in-
formation, please see “3.5.1 Basic Configuration > Video & Image” of Users
Manual.
The resolution drop-down list allows you to select the most suitable one out
of video resolutions to be displayed on Live View page.
The protocol drop-down list allows you to select which combination of pro-
tocols and methods to use depending on your viewing requirements, and
on the properties of your network.

10
2) Control toolbar
The live viewer toolbar is available in the web browser page only. It displays the following
buttons:
The Stop button stops the video stream being played. Pressing the key againtoggles
the start and stop. The Start button connects to the network camera or starts playing
a video stream.
The Pause button pauses the video stream being played.
The Snapshot button takes a snapshot of the current image. The location where the
image is saved can be specified.
The Digital Zoom button activates a zoom-in or zoom-out function for video image on
the live screen.
The Full Screen button causes the video image to fill the entire screen area. No other
windows will be visible. Press the ‘Esc’ button on the computer keyboard to cancel full
screen view.
The Manual Trigger button activates a pop-up window to manually start or stop the
event.
The Lens Control button allows user to control Zoom and Focus manually. (This Icon
appears for motorized lens model only.)
• Focus: Click “-” button for far focus and click
“+” button to nearfocus.
• Zoom: Click “-” button to zoom out and click
“+” button to zoom in. The focus is moved
slightly after adjusting zoom; adjust the focus
again, asnecessary.
• Smart Focus User can get automated focus
here.
The Smart Focus button activates smart focus function which set the focus to the
optimum position. (This Icon appears for motorized lens model only.)
The Relay Output button manually triggers relay out. (This Icon appears only if “En-
able alarm out” is selected in “Event Out - AlarmOut”.)
The VCA button shows/hides VCA rule setting and detected objects.
The Speaker button activates/deactivates externalspeaker.