ENER-J Ultra Slim User manual

LED Floodlight Pre Wired with
(WS1057) Wi-Fi +RF 500W Receiver
in 1 box allowing you to switch
on/off this LED Floodlight with
ENER-J’s Eco Range Wireless Kinetic
Switch (not included) as well as APP
Control Remotely via ENER-JSMART
App or Voice Control with Amazon
Alexa or Google Home
SKU EWS1069
The new ENER-J Ultra Slim LED Floodlight comes with an integrated ENER-J controller that can be paired with the ENER-J
wireless switches. A floodlight can be controlled by a maximum of 10 separate switches, and a switch can pair with up to
10 Receivers. Also, Smart control via your app remotely or voice control with Amazon Alexa and Google Home.
DESCRIPTION
50W LED Floodlight Pre-Wired with
WiFi+RF Receiver
works with

This ultra slim, newly designed flood light range is the latest in our outdoor LED range of lighting pre wired
with a 500W ECO range RF+WiFi receiver
Our Eco Range receiver allows floodlight to be switched without extra wiring using a Eco Range Kinetic
Switch (not included)
A floodlight can be controlled by a maximum of 10 separate switches, and a switch can pair with up to 10
Receivers
Switch on/off your LED Floodlight remotely via Free to Download and use ENERJSMART app or Voice Control
with Amazon Alexa or Google Assistant
Pre wired with 60cm cable, installation is both quick and easy
Applications include gardens, bushes/shrubs, security lighting, porch lighting, area floodlighting, factories,
offices. The possibilities are endless.
Shatter-resistant tempered glass. Die-cast aluminum casing. Includes adjustable bracket. Comes pre-wired
with 60cm length of rubberized cable.
Features:
Technical Specifications:
Dimensions
Power
Voltage
CCT
Lumens
Weight
Beam Angle
Warranty
190×151×27mm
50W
220—240V AC
6500k
4000Lm
2.3Kgs
110°
2 Years
Control Method Pairing with a ENER-J Wireless switch.
SKU EWS1069
INSTALLATION INSTRUCTIONS:
Shut off Power Mount the bracket on the wall
OFF
1 2

6
Stuck? Confused?
Contact our Technical Support team on:
T: [phone] E: [email protected]
Lines are open Mon - Fri (8am to 4pm)
SKU EWS1069
Dimension
Terminate loose ends of wire to an
appropriate IP Rated junction box
or similar, ensuring Live, Earth and
Neutral polarities are observed.
Live - Brown/Red
Neutral - Blue/Black
Earth - Yellow/Green
Connect the fitting to its bracket. Turn On Power and test the luminaire
ON
3
4 5
Please read these instructions before commencing installation & retain them for future reference.
Important information
It is recommended that floodlights are installed by a qualified electrician ensuring the installation complies to
current IEE wiring regulations & local building control.
These products are designed for connection to a 220-240V mains supply.
We will not accept responsibility for any claims arising from a poor installation.