ENER-J SHA5316 User manual

Smart WiFi Enabled
LED Panel 60x60cms
Colour Changing & Dimmable
SKU Code: SHA5316
• Warm white through to cool daylight, smooth dimming
via ENERJSMART App, this is a perfect solution for any
retail and office environment.
• Works with: - Amazon Alexa - Google Home - iOS App -
Android App
• IP20: For Indoor Use
• Variable White (2700K-6000K)
• White Plastic Frame
• Plastic Diffuser
• Up to 25,000 Hours Life
• Dimmable via APP
• 2 Year Guarantee
• Group Panels for One Simple Operation under 1 scene on
your ENERJSMART App.
Features
SKU
Model number
EAN code
Input voltage
Power
Lumens
Driver
Beaming Angle
Wireless tupe
Wireless standard
Colour temperature
Service life
Dimensions
Works with
: SHA5316
:
: 5060774550441
: AC175-265V
: 40W
: 3600lm
: Flicker Free
: 120° Stays Bright
: Wi-Fi 2.4GHz (5G not supported)
: IEEE 802.11b/g/n
: CCT colour changing &
Dimmable via App
: ≥30000 hours
: 60mm x 60mm
: Amazon Alexa, Google Home
and Google Assistant
Specifications
ENER-J's CCT Wi-Fi 600x600 LED Panel is an Easy
to install colour changing white smart panel
enabling you to change the colour of your lights
from 2700K to 6500K or switch them on/off.
[email protected]
www.ener-j.co.uk

[email protected]
www.ener-j.co.uk
• Before Installation make sure that the mains power supply
is disconnected in order to avoid accidental power surge or
shocks.
• Make sure that the electrical circuit that powers this Wi-Fi
CCT LED Ceiling Panel Light is equipped with adequate
protection (fuse).
• Never attempt to install a damaged product. If there is any
physical damaged, please return the unit back to the point
of purchase.
• Connect with mains cable (Live, Neutral and Earthing) in
the terminal cord as per the markings (See Pic below). Blue
Cable: Neutral, Brown Cable: Live and Grounding Cable:
Green or yellow.
• Close the Back cover. There is space for the cables in the
cover so it can be closed easily when the connection is
done.
• Place the Wi-Fi CCT LED Ceiling Panel Light in desired
ceiling hole and keep the springs of the Wi-Fi CCT LED
Ceiling Panel Light inside the ceiling and Ring part outside
the ceiling. Please adjust till it gets fitted properly.
Instructions for Installation
1. DOWNLOAD AND INSTALL OUR APP
Install “ENERJSMART” in your Smartphone or Tablet
devices through Google Play or iOS Play Store. Alternatively,
please scan below QR code’s.
REGISTER OR SIGN IN APP
• Select Location.
• Enter Email Address or Mobile Number.
• Verify Mobile Number or Email Address through Text
Message or our Email.
• Follow the screen instructions to login in APP.
ADD DEVICE
Before Adding Device, please Switch on/ Switch off the
light 3 times (time interval should not exceed 5 seconds).
Once you have lights blinking rapidly it means the device
is in Pairing Mode.Also make sure that your Wi-Fi router is
switched on and working ne. Need 2.4GHz Wi-Fi access to
pair this device. 5G is not supported. If you have a Wi-Fi Hub
please go in settings of your providers Hub APP and grant
2.4GHz Access
• Tap “+” located on Top Right corner.
• Select ‘Lighting Device’ from the devices in the list.
• Conrm light blinks rapidly.
• Select your Wi-Fi and put your Wi-Fi password.
• Conrm.
• Wi-Fi LED Panel Light will be added under your Devices.
2. CONTROL DEVICE
A: You can have a quick control of our ENERJSMART
LED Panel Light from the Device screen where you could
Switch on/off, Adjust the Brightness and Change the
Colour temperature from White to Warm White.
B: If you select ENERJSMART LED Panel Light then you can
access full Control Panel where there are more functions.
White Mode: Touch and get to your desired Colour you
want of your LED Panel Light. There is Brightness levels from
1% to 100%.
Left Time: This acts like a countdown. If your LED Panel
Light is switched on and you want it to get switched off
after particular time then this option is perfect.
Schedule: You can add multiple schedules in APP for
How to Pair the product to the APP
the LED Panel Light to get switched on or Switched off a
particular time of that day or every day.
C: Scene Mode: You can select Pre-Saved Scenes or Create
new.
Please click on top right corner (Pen sign) to check more
functions listed in the app.
D: Create Group: If you have 2 or more such devices (Same
model) then select this option to synchronize and
control all devices together. The Group will be created in
your Home Screen to control all devices together.
E: Share Device: You can share the device with your
friends and family. Simply click on Add and enter their
ENERJSMART APP login mobile number or email address.
They will get notication and the device will be shared
with them once they conrm it from their ENERJSMART
Account.
3. Note
1. Only Supports WLAN in 2.4 GHz, Android 4.1 and above,
iOS 8.0 and above. 5GHz Wi-Fi not supported.
2. When you connect multiple Wi-Fi Lamps, please try
and keep enough space (Advisable 15 cms) in between
the lamps as it may cause signal interference.
3. If Wi-Fi signal is weak then Wi-Fi Extender or Repeaters
will be required.

[email protected]
www.ener-j.co.uk
Thank you for choosing ENER-J!
Customer satisfaction is our TOP priority, please let us know how you felt about your experience. Happy? We are so happy that you are
pleased with our product. Feel free to express your newfound joy! Share your experience by writing a review.
Not Happy? If you are not fully satised with the item you received, have any problems like damages, or questions, please contact us.
We typically respond within 24-48 hours.
Products should be installed as per the instructions mentioned in this manual and also as per current electrical codes National Electric
Code (NEC).
To avoid the risk of re, electrical shock or injury, it is advisable that the installation is done by a trained Electrician. Also it is important
that mains power supply is switched off before the product is installed or repaired.
It is advisable to keep the manual for future reference.
Wi-Fi frequency is 2.4GHz and not 5GHz (5GHz not supported). You can do this by contacting your broadband service provider and
requesting to either switch to 2.4GHz entirely or split it between 2.4GHz and 5GHz.
If despite following the process as instructed above, you still fail to add the device, then possibly there is a rewall on your Wi-Fi router
blocking this device to be connected to your Wi-Fi Router. In such a case you would need to disable the rewall, add this device
following above process and once the device is added, enable the rewalls back again.
Caution
Please Note
Stuck? Confused?
Contact our Technical Support team on:
T: [phone]
E: [email protected]
Lines are open Mon - Fri (8am to 4pm)
Now you can use Google’s voice-activated speaker to control
your Smart Home Sockets and adaptors. With the Google
Assistant, you can turn on lights without pressing a button.
1. Setup
Start by getting the Google Home app and setting up your
Google Home if you have not done this already.
2. Add ENERJSMART Action
In the Google Home app, tap the menu icon and select Home
Control. Then tap the + button to see a list of Action tapping
ENERJSMART to select the Action.
3. Link you ENERJSMART Account
Now follow the in-app instructions to link you ENERJSMART
App account. Once complete you’ll be able to say “Okey
Google, turn my lamp on” or “Okay Google, set hallway to ON/
OFF”.
How to Pair the product to Google Home
If you’re new to Echo, it’s a super smart speaker from Amazon
that responds to your voice.
Once you’ve bought Amazon Echo and downloaded the
ENERJSMART App, you’ll need to enable...
1. Enable the ENERJSMART App
In your Alexa app, tap Skills in the menu and search for
ENERJSMART. Tap Enable.
2. Link Account
Enter your ENERJSMART App username and password and
follow the onscreen instruction.
3. Talk to Alexa
Now the fun part Ask Alexa to control your ENERJSMART
device. Check a full list of things you can control by clicking
here.
How to Pair the product to Alexa