
4/6 energysistem.com
Introduction
Thank you for your trust in us and for buying the new Music Box CM1 Bluetooth. We hope you enjoy it.
MP3/WAV player with Bluetooth® technology. Enjoy your music without cables from any Bluetooth® and take it
wherever you are with its lithium rechargeable battery.
Before you start using your smartphone we recommend you to read this manual and familiarize yourself with it. It only
takes a couple of minutes and it will help you to enjoy your device with maximum performance.
## Care and maintenance Do not expose your *Box CM1 Bluetooth* to impacts, dust, direct sunlight, humidity or high
temperatures. Do not use corrosive nor abrasive cleaning products. Keep the speaker clean and dust free, use for this a
soft dry cloth. Do not disassemble the device. All reparation should be done exclusively Energy Sistem Technology, S.A.
qualified staff. Be sure to keep your Music Box CM1 Bluetooth turned off while not in use. Do not store or leave the
device disused for a long period of time with the battery completely discharged. ## Features ## Main features * Pair
the music of your smartphone or tablet via the wireless connection thanks to the Bluetooth® technology. * Total
compatibility with smartphones and tablets iOS, Android™, Windows Mobile, BlackBerry, etc. * Freedom of sound: Listen
and share your music wherever you are, without cables. * Loudspeakers with acoustic enhancement system: Clear
sound and rich bass. * Total output power (RMS): 6W. * Compact and portable design, it will allow you to take it with you
anywhere and amplify your music. * USB memory decoder: plays MP3 files from USB memory drives with capacity up to
32 GB. * 3.5 mm "Audio-In" port: listen to music with any portable player or even computer. * Rechargeable battery. *
microUSB port battery charger. ### Technical features * Bidirectional Bluetooth®. 4.0 version, up to 10m range. *
Supports A2DP and AVRCP profiles. * USB memory decoder: plays MP3 files from USB memory drives with capacity up to
32 GB. * 2.0 Loudspeakers with acoustic enhancement system. * Total output power (RMS): 6W. * Frequency response:
80 Hz ~ 20 KHz * S/N ratio: >80 dB. * 3.5 mm "Audio-In" port. * Rechargeable lithium battery. * Earphones output ###
Battery specifications * Nominal capacity: 1600 mAh. * Nominal voltage: 3.7V. * Autonomy in radio mode: 12 hours.* *
Battery life in radio mode: 10 hours.* ( * ) Approximate battery life. Higher volume means higher battery consumption.
## Product Content * Tower CM1 Bluetooth * Audio cable: 3,5mm. * Charging USB cable ## General Overview | | | |:-----
--|:-------|
|
|| ## Main Functions ### Turn ON/OFF To turn on your device, press and keep 2 seconds the ON/OFF button (4).
The POWER ON INDICATOR (11) will turn on. To turn on your device, press and keep the ON/OFF button (4) for 2
seconds. When the device is on, the POWER ON INDICATOR (11) will be illuminated.
Changing play mode
When you turn the device, pairing mode will start automatically. To change into "Audio-In" mode, you only need to
connect the audio cable (included) to the AUDIO IN CONNECTION (12).
Charging the battery
When the speaker stops emitting sound or the battery icon starts blinking, it is time to charge it. Connect the mcroUSB
end of the included USB cable to your Music Box CM1 Bluetooth (8) and the other end to any USB port that can provide
energy (PC, USB wall charger, car, etc). The LED CHARGER INDICATOR (9) will turn on in red colour and when the charge
is completed the LED will turn off.
Note: It is recommended to turn off the device when charging. Do not store or leave the device disused for a long period
of time with the battery completely discharged.
Bluetooth Pairing
Every time you turn on your Music Box CM1 Bluetooth, pairing mode will start automatically; at the same time, the
search and pairing process will start on your Bluetooth® device (smartphone, tablet, laptop, etc). Once you have
identified the Music Box CM1 Bluetooth on your device, select connect. It will immediately connect without codes. The
speaker will play a sound indicating that the connection has been established.
To pair the speaker with the last device again, you only need to turn on the Music Box CM1 Bluetooth and the
synchronization will start automatically.