
8/10 energysistem.com
Call control (Hands-free function)
You can control your calls from the speaker itself. To do so, pair the Fabric Box with your smartphone.
When receiving a call, the song you are listening to stops and the ringing tone sounds instead. Press the Play/ Pause/
Call control/ TWS (4) to answer an incoming call and press it once again to hang up. The song will automatically resume
afterwards.
Press and hold Play/ Pause/ Call control/ TWS (4) when receiving an incoming call to reject it.
Note: If you receive an incoming call while TWS function is enabled, you will only hear the voice of the person who calls
through the speaker connected to your smartphone (left channel).*
TWS (True Wireless Stereo)
This option makes it possible to wirelessly connect another Fabric Box to hear music with twice as much power and
create a stereo sound system made up of two different channels: left and right.
To do so, switch on one of the Fabric Box and connect it to your smartphone via Bluetooth. Once you've done this,
switch on the other Fabric Box, enable Bluetooth mode and press and hold Play/ Pause/ Call control/ TWS (4) for 2
seconds. You will hear a sound confirming that both devices have been successfully synchronized.
From that moment on, you can start Bluetooth playback to hear music through both speakers at the same time. The
first connected speaker will be fed with the left channel (L) and the other one with the right channel (R).
If you want to disable this function, press and hold Play/ Pause/ Call control/ TWS (4) and both devices will be
disconnected.
Switch to the next/ previous track and adjust volume from any speaker while TWS mode is enabled. If you turn up the
volume of any of the speakers, you will be turning up the volume of both of them at the same time.
Note: *This is only possible if Bluetooth mode is enabled. In all other playback modes (USB, microSD, FM radio or line-
in) a TWS connection is not possible.
Auxiliary audio input
Your Fabric Box also features an Audio-in (7) for 3.5 mm mini jack to connect your external devices using an audio
cable.
Note: It is not possible to control music playback from the speaker while using this mode. You will have to use the
music player to control playback functions.
FM radio
Before using the FM radio function, it is necessary to carry out a search of all stations available. The radio stations will
be saved to the speaker's internal memory. It is therefore not necessary to carry out a new search each time you switch
it on. You will only have to do this if you place the device in a new location or if you change the frequency of the saved
radio station.
In order to carry out a search of all radio stations, press Change function (2) until the FM radio mode appears on screen.
Press and hold Change function (2) for 2 seconds. The Function indicator (6) flashes repeatedly while carrying out a
search. Once the process is completed, the LED flashes slowly. The process may take a few minutes. Once the search
has been completed, press and hold Volume +/ Next (5) or Volume -/ Back (3) to select the radio station that you want
to hear from all saved radio stations.
If you place the speaker somewhere else, you will have to carry out a new search to obtain a proper radio wave
reception.
Your Fabric Box will save the last selected radio station when you turn it off and on once again.