ENERpower XH18-LCD User manual

XH18
-
LCD Display Manual
Turn on the display for operating interface
1.
1.
Power button/front light button. Pres
s to turn on the
display. Interface starts with
“
welcome
”
and then gets
into
operationinterface.Longpress
toturnoff.Screenshutoff
after
showing
“
thank you
”
.
2. Press to switch between single
mileage and total mileage.
3 . ODO is total mileage. TRIP is single mileage. Default is ODO.
4. Mileage figur
e
5. Mileage unit Km/h o
r Mile/h.(MPH)
6. Power assist Levels. Switch t
hrottl
e for levels change from
1
to 4.
7. Speed indicator. Default un
it is Km/h. Press
simultaneously for set-up to switch between Km and Mile.
and

8. Speed indicator f
igure.
9. Power indicator. Green color for normal and r
ed color for power
shortage.
10. Erro indicator. Erro code for sp
ecific malfunction. Red color
11. Front light indicator. Default
is close. Press
on/off front light.
to turn
12.Walk assisance (6km). Default i
s close. Turn throttle in
-
wards
for 2 seconds to turn on Walk assistance function. Loose the
throttle to close.
Note: Set
-
up to be done for * items.
2.
At operating interface, press
and simultaneously for set-up.
1. Enter set
-
up interface.

2. Press to back and return to operation interface. Pre
ss to
set up.
3. For example
：
After entering the set
-
up interface, default is to
setupwheelsizes.Switchthrottletoincreaseorreducesizefigure.
Press
to set up Walk assistance function (6km/h). Switch
throttle for on/off choices. Press
interface.
to r
eturn operation
6km/h
off/on
unit
mode
km/mile
night/day
These three set up using throttle to switch choices.
Night/day choice for different back lights.