Table of Contents
Table of Contents
1. Introduction
1.1. General............................................................................................................ 5
1.2. Scrapping and recycling.................................................................................. 5
1.3. Warranty.......................................................................................................... 6
1.4. Technical support and spare parts.................................................................. 6
1.5. Product approval............................................................................................. 7
1.5.1. EU Declaration of Conformity.................................................................. 7
2. Safety
2.1. General............................................................................................................ 8
3. Design and function
3.1. General............................................................................................................ 9
3.2. EC-Oil.............................................................................................................. 10
4. Installation
4.1. Identification.....................................................................................................11
4.2. Mechanical.......................................................................................................12
4.3. Electrical and hydraulics..................................................................................12
4.4. On completion................................................................................................. 13
5. Operation
5.1. Before and during use.....................................................................................14
5.1.1. Before use............................................................................................... 14
5.2. Excavator/Backhoe loader...............................................................................15
5.3. Tiltrotator..........................................................................................................15
5.4. Attachment.......................................................................................................16
5.4.1. After attachment.......................................................................................16
5.5. Handling loads.................................................................................................17
5.6. Driving..............................................................................................................18
5.7. Detaching.........................................................................................................18
6. Maintenance
6.1. General............................................................................................................ 19
6.2. Daily inspections..............................................................................................20
6.3. Special maintenance....................................................................................... 21
6.3.1. EC-Oil.......................................................................................................21
6.4. Checks every 500 operating hours................................................................. 22
6.5. Lubricate every 40 operating hours.................................................................23
6.5.1. Pallet fork greasing..................................................................................23
6.6. Tightening torque.............................................................................................23
7. Decals
7.1. Warning decals................................................................................................24
7.1.1. Warning decals in cab............................................................................. 24
7.1.2. Symbol legend......................................................................................... 24
3
