Englefield MILANO User manual

Bath Screen
i
Style may vary

2
IMPORTANT
•The toughened glass (EN12150) in our shower enclosures and bath screens is
completely safe providing that it is installed with care and according to our guidelines
•Care must be taken when handling and installing the glass to ensure that it doesn’t
experience any sharp impacts or severe fluctuations in temperature that could cause
a stress point to develop within it. For health and safety we advise that two people
perform the installation of the product.
•Toughened glass is intrinsically physically and thermally stronger than standard glass
to ensure that it is safe for use in the bathroom. In the unlikely event that the glass
does break because of the above reasons then it will do so into small, thumbnail sized
blunt fragments
PRE-INSTALLATION CHECKS
•Ensure that you have received the correct product by referring to the labels on the
product packaging.
•Check the contents of the pack carefully before installation.
•Take special care when unpacking the contents from the packaging, especially the
toughened glass components.
•Carefully check all the components you have received for damage or defects before
you start installation – we cannot accept responsibility for any defects or damage that
you may find once installation has started
•Please take time to read and understand all the instructions supplied with the product
prior to starting installation.
•Ensure that there are no hidden pipes or cables before you carry out any drilling.
•Do not attempt to make any alterations to the toughened safety glass itself as this
could damage it.

Installation
Tools required for installing:
3
3mm6mm
Silicone
2
3
x2

Parts included:
x3 x3
x3
x3
x2 x2
4
ABC
DEF
GHI
JKL

1
2
5

3
4
6
x3
6mm

7
5
6
F
L
I
H
J
F
x3
C

7
8
8
K
F
F
I
H
J

9
10
9
G
3mm
A
B
B

10
11
12
Silicone
24hr

Care and Cleaning:
Soap
Abrasive
Shower Gel
11
If you require any additional information or have any issues with this product please refer to the website.