ENGO CONTROLS E10W230WIFI Installation instructions

FULL MANUAL
E10W230WIFI / E10B230WIFI
| Internet controlled thermostat, WiFi

TABLE OF CONTENTS
1. Introduction...............................................................................................................................................................4
1.1 Product Compliance ......................................................................................................................................................................4
1.2 Safety Informations.......................................................................................................................................................................4
2. Product Overview .......................................................................................................................................................5
2.1 Package content............................................................................................................................................................................6
2.2 Proper thermostat location ...........................................................................................................................................................6
2.3 Wall mounting ..............................................................................................................................................................................7
3. Connection description ...............................................................................................................................................8
3.1 Connection diagram for gas boiler.................................................................................................................................................8
3.2 Connection diagram to pump / actuator .......................................................................................................................................9
3.3 Connection diagram to the control box .......................................................................................................................................10
4. About ENGO ..............................................................................................................................................................11
4.1 Wi-Fi installation guidelines........................................................................................................................................................11
4.2 Mobile device requirements........................................................................................................................................................11
4.3 About ENGO Smart app (general information) ............................................................................................................................12
5. First power on...........................................................................................................................................................13
5.1 LCD icon description ....................................................................................................................................................................14
5.2 Button description.......................................................................................................................................................................14
6. ENGO Smart app installation......................................................................................................................................15
7. Installation of the Wi-Fi thermostat in the app ...........................................................................................................16
8. Operation in the app .................................................................................................................................................19
8.1 General information....................................................................................................................................................................19
8.2 App icons description ..................................................................................................................................................................19
8.3 Control ........................................................................................................................................................................................20
8.3.1 Setpoint temperature change ....................................................................................................................................20
8.3.2„Power”function ........................................................................................................................................................21
8.3.3 Manual mode.............................................................................................................................................................23
8.3.4 Schedule mode ..........................................................................................................................................................24
8.3.5 Holiday mode.............................................................................................................................................................28
8.3.6 FROST mode...............................................................................................................................................................29
8.3.7 Diagrams....................................................................................................................................................................30
8.4 Settings (installer parameters)....................................................................................................................................................31
8.4.1 Child lock function .....................................................................................................................................................31
8.4.2 Backlight brightness ..................................................................................................................................................32
8.4.3 Max temp. limit..........................................................................................................................................................33
8.4.4 Min temp. limit ..........................................................................................................................................................34
8.4.5 Sensor Selection.........................................................................................................................................................35
8.4.5.1 Internal temperature sensor (IN) ..............................................................................................................35
8.4.5.2 External temperature sensor (OUT)...........................................................................................................36
8.4.6 Temperature correction ..............................................................................................................................................37
8.4.7 Control type (algorithm) ............................................................................................................................................38
8.4.8 Device state on power................................................................................................................................................40
8.5 E10 thermostat management in the Engo Smart app .................................................................................................................41
8.5.1 Change the name, icon and location of the thermostat..............................................................................................41
8.5.2 Device information.....................................................................................................................................................43
8.5.3 Tap-To-Run and Automation ......................................................................................................................................44
8.5.4 Oine notication.....................................................................................................................................................49

8.5.5 Share device...............................................................................................................................................................50
8.5.6 Create group ..............................................................................................................................................................52
8.5.7 FAQ & Feedback..........................................................................................................................................................54
8.5.8 Add to home screen ...................................................................................................................................................55
8.5.9 Check device network ................................................................................................................................................56
8.5.10 Device update ..........................................................................................................................................................57
9. Alarms / Push notications / Emergency states ...........................................................................................................58
10. Remove device........................................................................................................................................................60
11. Cleaning and maintenance ......................................................................................................................................61
12. Technical Informations ............................................................................................................................................61
13. Warranty ................................................................................................................................................................62

4E10W230WIFI(E10B230WIFI) - FULL MANUAL
This product complies with the essential requirements and other relevant provisions of Directives 2014/53/EU and 2011/65/EU.
• Before starting installation work and before using the product, read the entire manual.
• The information contained in the instructions is essential for proper functioning.
• To avoid accidents resulting in personal injury and material damage, please follow all safety precautions, specied in this manual.
• The device should not be used by people with limited mental, sensory or mental abilities, without experience, of insucient knowledge as well as
children.
• Do not use an unassembled device (eg without a cover).
• The device may only be opened by a qualied person.
• Keep electrical devices out of the reach of children and ensure that they do not play with it. Children should not be left unattended. If necessary,
disconnect the control system for the entire room.
• Do not leave the packaging, cabinet, or any loose parts of the device unattended, as they pose a risk to children.
WARNING!
• Installation must be carried out by a qualied person with appropriate electrical qualications in accordance with standards and regulations in force in
the given country and in the EU.
• Never try to connect the device other than as described in the manual.
• Before assembly, repair or maintenance as well as during any connection works it is absolutely necessary disconnect the mains supply and make sure
that the terminals and electric wires are not live.
• The device may not be exposed to extreme temperatures, strong vibrations or subjected to mechanical shock.
• The device should not be used in unfavorable environmental conditions or in rooms where there is a concentration of ammable gases, fumes or dust.
WARNING!
• There may be additional protection requirements for the entire installation that the installer is responsible for maintaining.
1. Introduction
1.1 Product Compliance
1.2 Safety Informations
Care for the natural environment is of paramount importance to us.The awareness that we manufacture electronic devices obliges us
to dispose of used electronic components and devices safely. Therefore the company has received a registration number issued by the
Chief Inspector for Environmental Protection.The crossed out symbol the trash can on the product means that the product must not be
disposed of with ordinary waste containers. Sorting waste for recycling helps to protect the environment. It is the user’s responsibility
to surrender used equipment to a designated collection point for recycling waste from electrical and electronic equipment.

5
E10W230WIFI(E10B230WIFI) - FULL MANUAL
E10W / E10B
E10 is a wired temperature thermostat with a WiFi and Bluetooth module. It enables economic and ecological control of any type of heating. Provides
remote control of the heating system using the ENGO Smart / Tuya Smart app. It is characterized by a clear menu and a multitude of useful functions.
Programming the E10 is very simple and allows you to adjust the heating cycle to the user’s daily rhythm. The model is available in white and black.
Using ENGO Smart, we can manage smart home devices working on the basis of various communication standards - Zigbee, Bluetooth or Wi-Fi. We can
control the equipment from anywhere.We also have the option to control several devices at the same time.
A big plus is the ability to create rules based on, among others about time, location or current air temperature. There is also an option to assign access
rights to specic people - for example family members. ENGO Smart is a free app, available for both Android and iOS users.
Product features:
• minimalistic design
• adjust the brightness of the display
• ability to share a device to multiple users
• possibility of connecting an external temperature sensor
• diagrams with temperature history (available in the app)
• multiple functions available from the ENGO Smart / Tuya Smart app
• possibility to set the minimum and maximum setpoint temperature range
• push notications from the app
• very easy to use
2. Product Overview

6E10W230WIFI(E10B230WIFI) - FULL MANUAL
2.1 Package content
1) E10W / E10B thermostat
2) Quick Guide
3) Mounting screws
2.2 Proper thermostat location
Please note:
The recommended height for mounting the E10W / E10B thermostat is approx. 1.5 m above the ground, away from any sources of heat
or cool. It is not recommended to install the thermostat on an outside wall, in a draft or in a place where it will be exposed to direct
sunlight.
1 2
3
Quick Guide
Wi-Fi Temperature thermostat (ENGO/TUYA App)
E10W230WIFI
E10B230WIFI
Ver.1
Release date: I 2022
Distributor:
QL CONTROLS Sp z o.o. Sp. k.
43-262 Kobielice
4 Rolna St.
Poland www.engocontrols.com

7
E10W230WIFI(E10B230WIFI) - FULL MANUAL
2.3 Wall mounting
To properly mount the thermostat on the wall, please follow the steps below:
Use a screwdriver to unscrew the screw at the
bottom of the thermostat to detach the rear part.
Make sure that the wires are not under 230V AC.
Connectthe thermostat accordingtothe wiring diagram. Put the thermostat in the box.
Screw the thermostat to the mounting box. Slide the front of the thermostat onto its back
and tighten the screw from the bottom.
Turn on the power.
The thermostat is now ready for operation.
1
3
5 6
2
4
3

8E10W230WIFI(E10B230WIFI) - FULL MANUAL
3. Connection description
3.1 Connection diagram for gas boiler
L, N - power supply
COM, NO - voltage-free output
S1, S2 inputs - output for temperature sensor
- fuse
Legend:
Boiler - Boiler connection*
- Boiler’s contacts for ON/OFF
thermostat (according to the
boiler’s instructions)
Temperature sensor
L
AC 230V
COM
NO
N
N
L
S1
S2
L
N
E10W230WIFI
BOILER CONNECTION

9
E10W230WIFI(E10B230WIFI) - FULL MANUAL
Legend:
3.2 Connection diagram to pump / actuator
Pump
Valve
Temperature sensor
L, N - power supply
COM, NO - voltage-free output
S1, S2 inputs - output for temperature sensor
- fuse
L
AC 230V
N
COM
NO
N
L
S1
S2
E10W230WIFI MAX
3(1)A

10 E10W230WIFI(E10B230WIFI) - FULL MANUAL
3.3 Connection diagram to the control box
L, N - power supply
COM, NO - voltage-free output
S1, S2 - output for temperature sensor
SL1...SL8 - 230V control input in the control box
- fuse
Legend:
Temperature sensor
NOCOM
LN
S1
S2
N
N
SL1
SL1
L
E10W230WIFI
ECB08M230
listwa sterująca
1 - 8 Strefy

11
E10W230WIFI(E10B230WIFI) - FULL MANUAL
4. About ENGO
4.1 Wi-Fi installation guidelines
4.2 Mobile device requirements
• Make sure that the Wi-Fi network where you want to install the app broadcasts in the 2.4 GHz frequency.
• We recommend turning o mobile internet (cellular data) on your phone during conguration.
• It is recommended to use the encryption of the Wi-Fi network at the WPA-Personal level.
FOR A MOBILE DEVICE WITH ANDROID:
Android version 5.0 or higher
FOR A MOBILE DEVICE WITH IOS SYSTEM:
IOS version 9.0 or higher
Parameters Specication
Frequency band (GHz) 2.4GHz
WLAN standard IEEE 802.11 b/g/n
Protocols IPv4/IPv6/TCP/UDP/HTTPS/TLS/MulticastDNS
Protection WEP/WPA/WPA2/AES128
Supported type STA/AP/STA+AP

12 E10W230WIFI(E10B230WIFI) - FULL MANUAL
4.3 About ENGO Smart app (general information)
The heart of the ENGO system is its ENGO Smart app. It allows you to combine the functionality of many devices in an accessible way. It allows
you to connect to devices marked with the logs„Powered by Tuya”or„Powered byTuya: Intelligence Inside”.
Remote control is carried out via the Tuya cloud, which connects to the user’s phone, so that the user of the device does not have to rent a server
room or write software for it. Why can’t the phone connect directly to the device? Such a necessity is due to the fact that it would require an appropriate
router with a xed IP address, so the cellular network will not work, and even with such a router, its conguration would be quite complicated and
would require some sacrices as regards the security of the link, because you would have to allow the devices from outside the house connected to it.
The rst connection and conguration can be performed manually according to the instructions displayed in the app, but there is also an option
to automatically scan for congurable devices. After that, the device automatically connects with the app and is visible on the list.
Each of the owned devices can be optionally assigned to the room in which it is located, which makes it easier to nd out when our home is
truly intelligent. All devices, regardless of whether they belong to specic rooms, are assigned to one of the houses that can have more than one. This
assignment is not pointless, as the app knows where the device is located and can provide information about the current weather.
Thanks to this data, you can create so-called scenes, i.e. automate repetitive activities and thus save time. For example, you can set in the app
that if the temperature drops below fteen degrees, the heating will turn on or that the light will come on when the sun goes down.
But what if you need to automate something independent of the weather?The ENGO app also satisfy such a need, and it does so by using scenes
that can be run with a single tap, or scenes that trigger when the state of one of the added devices changes. Example: we are leaving the house and we
want the power to be cut o from the smart socket to which the iron is connected, and ve minutes after that, all lights in the house turn o. It can be
easily congured and started with one tap. It is similarly simple to solve the problem of turning o the light in the bedroom - if the bedside lamp is turned
on, it can be set to turn o the light in the bedroom.
COMPATIBILITY WITH TUYA DEVICES (examples):
Smart plugs Smart bulbs Cameras Doorbells

13
E10W230WIFI(E10B230WIFI) - FULL MANUAL
5. First power on
The thermostat is powered by 230V. When properly connected to the power supply, the thermostat will start up showing all the icons and then go to the
main screen.
IN ORDER TO TURN ON THE THERMOSTAT IT
IS NECESSARY CONNECT IT TO 230V...
...THE MAIN SCREEN IS APPEARED.
...THE DISPLAY WILL SHOW ALL THE ICONS...
3
1 2
3

14 E10W230WIFI(E10B230WIFI) - FULL MANUAL
5.1 LCD icon description
5.2 Button description
Reset
Button Function
Change the parameter value down
Change the parameter value up
Enter the pairing mode /Thermostat factory reset
+
Thermostat’s reboot
1. Heating icon
2. Frost protection mode
3. Floor temperature protection
4. Internet
5. Connection withWi-Fi
6. Temperature scale (Celsius)
7. Current / setpoint room temperature
1. “DOWN”button
2. “UP”button
3. “RESTART”button
6
7
5
231
4321

15
E10W230WIFI(E10B230WIFI) - FULL MANUAL
6. ENGO Smart app installation
DOWNLOAD THE ENGO SMART APP:
1. FOR A MOBILE DEVICE WITH ANDROID:
2. FOR MOBILE DEVICE WITH IOS SYSTEM:
Method 1: Scan the QR code with the device’s scanner, download and install the app.
Method 1: Scan the QR code and follow the directions to get to the AppStore, download and install the app.
Method 2: Open the Google Play Store on your smartphone, search for and install the„ENGO Smart”app.
Method 2: Open Apple’s„AppStore”on iPhone, search for„ENGO Smart”app, download and install.
Please note! Please enable storage / location / camera permissions during installation. Otherwise, problems may arise during use / operation.
Please note! Make sure your router is within range of your mobile phone. Make sure you are connected to the Internet. This will reduce the pairing time
of the device.
DOWNLOAD FROM: DOWNLOAD FROM:

16 E10W230WIFI(E10B230WIFI) - FULL MANUAL
7. Installation of the Wi-Fi thermostat in the app
REGISTER THE NEW ACCOUNT:
To register a new account, please follow the steps below:
1
3
2
4
Click„Register”to create
new account.
Enter the verication code received
in the email.
Remember that you only have
60 seconds to enter the code!
Then set the login password.
Enter your e-mail address to which
the verication code will be sent.

17
E10W230WIFI(E10B230WIFI) - FULL MANUAL
PODŁĄCZ REGULATOR DO WI-FI:
3 sec. 3 sec.
3
1 2
4
Turn on Wi-Fi and Bluetooth on your
smartphone. It’s best to connect
mobile to the Wi-Fi network to which
you want to assign the thermostat.
In the app, select:
„Add Device”.
Then choose:
„Auto Scan”.
Make sure the thermostat is powered
on. Then press and hold the buttons
on the thermostat for approx. 3 sec.
until the display shows „PA”. Then
release the keys. The pairing mode
will be started up.

18 E10W230WIFI(E10B230WIFI) - FULL MANUAL
After nding the thermostat,
go„Next”.
Engo
65
9
7
10
8
Select the Wi-Fi network in which
the thermostat will operate and
enter the password of this network.
Name the device
and click „Done”.
Wait for the app to congure the
thermostat with the selected Wi-Fi
network.
The thermostat has been installed
and displays the main interface.
Go„NEXT”.
3

19
E10W230WIFI(E10B230WIFI) - FULL MANUAL
8. Operation in the app
8.1 General information
8.2 App icons description
In this chapter, you can learn how to use the Wi-Fi thermostat in connection with the ENGO Smart app. To be able to control the thermostat via the
Internet, you will need an Internet connection and the ENGO Smart app. Controlling the thermostat via the app from a mobile device (IOS, Android) gives
you a lot of freedom and the ability to remotely manage the temperature from anywhere.
View of the E10 thermostat menu in the ENGO Smart app:
Thermostat operation mode indicator
Thermostat status indicator
Setpoint temperature slider
Thermostat name change tool
“UP”button change the
parameter value up
User settings
(including advanced installer parameters)
Room temperature
“DOWN”button change the
parameter value down
Control - there are basic thermostat
control functions, e.g. changing the
work mode, setting the schedule,
etc.
Return
Thermostat’s name
Setpoint temperature

20 E10W230WIFI(E10B230WIFI) - FULL MANUAL
Make a new temperature setting by
moving the slider along the bar.
The thermostat started sending
a signal for heating, which was
signaled by a change of working
status to„Heating”...
1
4
2 3
Enter the thermostat interface.
...and the heating icon appears on
the display of the thermostat.
8.3.1 Setpoint temperature change
Changing the temperature setpoint is done by moving the cursor left / right in the app. On the screen, the actual temperature setpoint is represented by
the number displayed in larger font.
3
8.3 Control