Enigma Care ENB-301 Series User manual

ENB-301 Electric Home Care Bed
Introduction
TEL: [phone]
No.50-5, Ln. 320, Sec. 1, Shatian Rd., Dadu Dist., Taichung
City, 432 Taiwan (R.O.C.)
FAX: [phone]
2.
These nursing bed is a bed specially designed for hospitals, nursing
homes, assisted living facilities, outpatient clinics, and in home health
care.
These beds have special features both for the comfort and well-being
ofthe patient and for the convenienceof healthcare workers.Common
features include adjustable height for the entire bed, the head, and the
feet, adjustable side rails, and electronic buttons to operate both the
bed and other nearby electronic devices.
This operating manual will help you get to know the function of our
nursing beds and, in addition, describes •assemblingthe nursing bed.
• operating the adjustment controls
• care and maintenance of the nursing bed
Operation and construction ofthebeds isexplained usingphotographs
of the ENB-301 nursing bed version. If there are differences between
this and other bed versions in either operation or construction, the text
will draw your attention to this.
Themanual has been drawn up using information available at the time
of printing withregard toconstruction and operation of thenursing bed.
Wereserve the right to make changes due to technical improvements.
If you have any other questions about this nursing bed, please contact
your supplier.

ENB-301 Electric Home Care Bed
Contents
TEL: [phone]
No.50-5, Ln. 320, Sec. 1, Shatian Rd., Dadu Dist., Taichung
City, 432 Taiwan (R.O.C.)
FAX: [phone]
3.
1.0 Safety instructions.........................................................................4
1.1 Symbols used..........................................................................4
1.2 Proper use...............................................................................4
1.3 General information..................................................................5
1.4 Notes on electrical fittings… .......................................................... 6
1.5 Notes for nursing personnel, attendants and operator..................6
1.6 Notes on setting up the nursing beds….........................................7
1.7 Notes on maintenance and inspection… .......................................7
2.0 Nursing bed models.......................................................................8
3.0 TRANSPORT AND STORAGE.........................................................9
4.0 Components.................................................................................. 10
5.0 Fittings: bed frame........................................................................10
5.1 Side rails................................................................................10
5.2 Mattress support..................................................................... 11
5.3 Movable head and foot boards……………………………………..12
6.0 Fittings: Electrics..........................................................................13
6.1 Lift motor................................................................................ 13
6.2 Hand set.................................................................................13
6.3 Mattress support motor............................................................ 14
7.0 Setting up the nursing bed............................................................ 15
7.1 Connecting the lift motor, hand set mattress support motor and
accumulator box..................................................................... 15
8.0 Operating the nursing bed............................................................ 16
8.1 General notes on operation.....................................................16
8.2 Operating the nursing bed adjustments - hand set....................17
8.3 Operating the brakes ..............................................................18
9.0 Cleaning ........................................................................................ 19
10.0 Disposal ........................................................................................ 20

ENB-301 Electric Home Care Bed
Safety information
TEL: [phone]
No.50-5, Ln. 320, Sec. 1, Shatian Rd., Dadu Dist., Taichung
City, 432 Taiwan (R.O.C.)
FAX: [phone]
4.
1.0 Safety instructions
1.1 Symbols used
This instruction manual contains the following symbols which are used to
highlight special hazards in dealing with the nursing bed or information for
simplifying handling of the nursing bed.
Caution! This symbol identifies safety information which notifies you of
hazards when dealing with the product
NOTE You will also find information about dealing with the product
under this symbol
1.2 Proper use
Enigma-Care nursing beds are intended for continuous use instead of
household beds. They are intended for use in alleviation or compensation of
a handicap or inability and for making the working conditions of nursing
personnel easier.
Enigma-Care nursing beds can also be used for the diagnosis,
treatment or observation of patients under medical supervision/
instructions in accordance with DIN EN 60601-2-38 in the home care or
in the nursing home sectors (or similar institutions and).
Enigma-Care nursing beds are only approved for use by persons of over
12 years of age due to their complexity.
The nursing beds are intended for use in:
• home nursing
• nursing home and rehabilitation institutions

ENB-301 Electric Home Care Bed
Safety information
City, 432 Taiwan (R.O.C.)
FAX: [phone]
5.
1.3 General information
Before assembling or using the nursing bed, please read this operating
manual carefully through!
Ensure that:
• the complete operating manual is read by all persons entrusted
withthe setting up, operation or maintenance of the nursing bed.
• all persons entrusted with the setting up, operation or
maintenance ofthe nursing bed have access tothis operating manual
at all times.
Any damages resulting from nonobservance of this operating manual
are excluded from the guarantee
Limitations of use!
• Patients taller than 190 cm should not use this nursing bed
Accident hazard !
• Always check that the cabling is in perfect working order and that the
tensionprotection is functioning before use
• Only use the nursing bed for its proper intended use
• Maximum safe working load = see technical spezification
• Only use this nursing bed when it is in perfect working order.
• It is imperative that you always rectify any faults which could influence the
functionand safety of the nursing bed immediately
• Always secure the nursing bed against rolling by engaging the wheel brakes
whenUnattended !
• Always use all of the wheel brakes on the nursing bed.
• Only use accessories approved by Enigma-Care
TEL: [phone] No.50-5, Ln. 320, Sec. 1, Shatian Rd., Dadu Dist., Taichung

ENB-301 Electric Home Care Bed
Safety information
TEL: [phone]
No.50-5, Ln. 320, Sec. 1, Shatian Rd., Dadu Dist., Taichung
City, 432 Taiwan (R.O.C.)
FAX: [phone]
6.
1.4 Notes on electrical fittings
Risk of short-circuit and fire!
• Always ensure that the mains cable cannot be run over when moving the
nursing bed or bedside tables, or by cleaning and lifting equipment such as hoists.
• Always check the cabling for correct positioning before use , jamming or kinking of
the cable must be avoided.
• Always remove the mains plug before long periods of non-use.
1.5 Notes for nursing personnel, attendants and operator
Accident hazard!
• Do not carry out any medical electrical applications in which the patient is
connected intravascularly or intracardially with the medical device whilst the patient
is in the nursing bed.
• Donot use the nursingbed in the vicinity of strong electro magnetic fields (for
example major medical equipment)
• Always plug the nursing bed mains plug into a separate wall socket
• Route the mains cable to the power supply socket so that no mechanical tension
results, and so that it cannot be crushed, bent or run over.
• Please observe the appropriate equipment operating and installation instructions
with regard to any additional safety risks that may arise when combining the nursing
care bed with other equipment.
Should you have any questions in this respect, please contact your orthopaedic
and sanitary supplier or Days Healthcare directly .
Accident hazard due to falling out !
• Always move the nursing bed to the lowest height when unsupervised or for
entering or exiting the bed
Risk of short-circuit and fire!
• Before moving the nursing bed , unplug the mains cable and ensure that the mains
cable cannot be run over.

ENB-301 Electric Home Care Bed
Safety information
TEL: [phone]
No.50-5, Ln. 320, Sec. 1, Shatian Rd., Dadu Dist., Taichung
City, 432 Taiwan (R.O.C.)
FAX: [phone]
7.
• The nursing bed may not be used in surroundings in which it is possible that
flammable gases or vapours (e.g. from anaesthetics) are present
Danger due to actuator motor overheating!
• Before adjusting the bed height , ensure that nothing is blocking the full adjustment
movement.
1.6 Notes on setting up the nursing beds
Injury hazard due to improper assembly!
• Ensure that all components in the nursing bed have been correctly assembled
• Check that all adjustment options are inperfect working order after assembly.
Accident hazard!
• Only carry out assembly work using suitable tools .
• Only carry out assembly work if you are a competent person who is used to working
with the tools required.
1.7 Notes on maintenance and inspection
All inspection work must only be carried out by competent engineers, capable of evaluating
the condition status and recognising any possible effects and hazards, due to their specialist
training, knowledge and experience in addition to knowledge of all relevant regulations.
Always read the relevant chapters thoroughly before carrying out maintenance work. Any
damages resulting from nonobservance of this manual are excluded from any guarantee of
liability.
Always carry out a performance test after maintenance work
and inspections!
• When operating the adjustment motors , ensure that the nursing bed cabling cannot
be crushed or overstretched.

ENB-301 Electric Home Care Bed
Nursing bed models
TEL: [phone]
No.50-5, Ln. 320, Sec. 1, Shatian Rd., Dadu Dist., Taichung
City, 432 Taiwan (R.O.C.)
FAX: [phone]
8.
2.0 Nursing bed models
ENB-301B-ABS Electric Home Care Bed
ENB-301F Electric Home Care Bed
ENB-301C Electric Home Care Bed

ENB-301 Electric Home Care Bed
TRANSPORT AND STORAGE
TEL: [phone]
No.50-5, Ln. 320, Sec. 1, Shatian Rd., Dadu Dist., Taichung
City, 432 Taiwan (R.O.C.)
FAX: [phone]
9.
00
3.0 TRANSPORT AND STORAGE
The following conditions should be followed when transporting and storing the bed:
• To save space, the bed should be stored on the transport stand.
• The bed should always be stored on a flat and level floor.
• The bed ends should be set to minimum height.
• If fitted the bed extension should be removed and stored separately.
• Side rail components, if applicable (not including side rails) to be kept in the channels on the bed ends (or stored
safely together).
• The brakes should be applied.
• All profiling sections should be secured with hook and loop tape (or similar).
• The bed should be covered to protect it from fluid ingress, dirt, dust etc.
• Beds should not be stored one on top of another.
• Beds should not be stored on their side.
• Ambient temperature: -20OC to +50OC.
• Humidity: 30% - 75% at30OC –not condensing.
• The bed is not intended for patient transport, it is not to be moved out of the room it is
Located in with a patient occupying the bed –Risk of patient/carer injury. If the bed is to be
Moved within the room with an occupant in the bed a risk assessment in line with local health
And safety policy is to contract based in order to ensure that neither staff nor patients are put
At risk when moving the bed; this is dependent on the situation and load on the bed.
• If transporting the bed utilities on its transport stand ensure a risk assessment in line with local
Health and safety policy is undertaken to ensure that the staff are not put at risk when moving
The bed, especially in regards to moving up/down inclines and uneven surfaces.
• The bed must never be moved on the transport stand with the locking collars missing or in the
Unlocked position –Risk of bed collapse.
•To prevent the risk of cross infection, when moving a bed from an end user ’ s residence,
Ensure that all activities in relation to the bed are carried out using disposable gloves and that
They are then reported annex, unless it can be verified that the bed and any
Associated accessories have been patterned cleaned and disinfected prior to collection.
•On the return of a bed from an end user ’ s residence, prior to putting the bed into storage
Ensure it has been cleaned and disinfected in line with the local infection control policy and/or
As defined in page 18 of these instructions for use

ENB-301 Electric Home Care Bed
Assembling the nursing beds
TEL: [phone]
No.50-5, Ln. 320, Sec. 1, Shatian Rd., Dadu Dist., Taichung
City, 432 Taiwan (R.O.C.)
FAX: [phone]
10.
4.0 Components
5.0 Fittings: bed frame
5.1 Side Rails
When lifting the guardrail : Push up after pressing the
red button, The buckle is completed.
When laying off the guardrail : Press the red button
and push down to the end

ENB-301 Electric Home Care Bed
Fittings: bed frame
TEL: [phone]
No.50-5, Ln. 320, Sec. 1, Shatian Rd., Dadu Dist., Taichung
City, 432 Taiwan (R.O.C.)
FAX: [phone]
11.
5.2 Mattress support
4-section separation of mattress support :
The head section can be electrically adjusted up to 75°
The foot section up to 30°

ENB-301 Electric Home Care Bed
Nursing bed models
TEL: [phone]
No.50-5, Ln. 320, Sec. 1, Shatian Rd., Dadu Dist., Taichung
City, 432 Taiwan (R.O.C.)
FAX: [phone]
12.
5.3 Movable head and foot boards

ENB-301 Electric Home Care Bed
Fittings: Electrics
TEL: [phone]
No.50-5, Ln. 320, Sec. 1, Shatian Rd., Dadu Dist., Taichung
City, 432 Taiwan (R.O.C.)
FAX: [phone]
13.
6.0 Fittings: Electrics
6.1 Lift motor
The motor lift movement is 40
cm. This enables the nursing bed
lying area to be raised from 33 cm
to 73 cm.
6.2 Hand set
The hand set is used to operate all
nursing bed actuator motors.
Operation takes place using the
keypad on the front side of the
hand set.
The fixing bracket on the rear of the hand set can be used to hold it in
an easily reachable position on the nursing bed.

ENB-301 Electric Home Care Bed
Fittings: Electrics
TEL: [phone]
No.50-5, Ln. 320, Sec. 1, Shatian Rd., Dadu Dist., Taichung
City, 432 Taiwan (R.O.C.)
FAX: [phone]
14.
6.3 Mattress support motor
The nursing bed with 4 mattress supports is equipped with three
mattress supports motors. They are installed under the support of
the mattress. One of the motors is used to adjust the head, and the
other motor is used to adjust the feet of the mattress support. There
is also one for the height control of the bed.

ENB-301 Electric Home Care Bed
Setting up the nursing bed
TEL: [phone]
No.50-5, Ln. 320, Sec. 1, Shatian Rd., Dadu Dist., Taichung
City, 432 Taiwan (R.O.C.)
FAX: [phone]
15.
7.0 Setting up the nursing bed
Before commencing assembly of the nursing bed, check the package contents
against chapter 4.0 „ Components “. If any faults are apparent or components
are missing, please contact Enigma-care or your supplier.
Trapping hazard!
There is a possible danger of trapping at all joints on the
nursing bed and at support points for the mattress support.
Injury hazard due to improper assembly !
• Ensure that all components in the nursing bed have been correctly
assembled.
• Check that all adjustment options are in perfect working order after
assembly.
Accident hazard !
• Only carry out assembly work using suitabletools
• Only carry out assembly work if you are used to working with the
tools required.
7.1 Connecting the lift motor, hand set
mattress support motor and accumulator box
When connecting, ensure that:
•The sealing rings (a) on the plug must not be damaged while
being plugged in.
•The ribs (b) on the plug must be aligned with the guide
grooves (c) on the jack socket.

ENB-301 Electric Home Care Bed
Operation
TEL: [phone]
No.50-5, Ln. 320, Sec. 1, Shatian Rd., Dadu Dist., Taichung
City, 432 Taiwan (R.O.C.)
FAX: [phone]
16.
8.0 Operating the nursing bed
Accident hazard !
• Do not use electrical medical appliances on patients in these nursing
Beds
• Do not use the nursing bed in the vicinity of strong electromagnetic
fields (for example major medical equipment.
Trapping hazard!
There is a possible danger of trapping at all joints on the nursing bed
and at support points for the mattress support.
When carrying out adjustments, please observe the following points:
•Before adjusting the bed height, ensure that nothing is blocking the full adjustment
movement.
•Always move the nursing bed to the lowest height when unsupervised or for
entering or exiting the bed.
•When carrying out adjustments, observe the patient in the bed and the bed’s
surroundings.
8.1 General notes on
operation
The adjustment range for the
surface height is between 33 and
73 cm.
The head section can be inclined
upwards up to 75°.
The footpiece can inclined by 30°.

ENB-301 Electric Home Care Bed
Operation
TEL: [phone]
No.50-5, Ln. 320, Sec. 1, Shatian Rd., Dadu Dist., Taichung
City, 432 Taiwan (R.O.C.)
FAX: [phone]
17.
8.2 Operating the nursing bed adjustments - hand set
Hand set signals when operating adjustment keys:
• Indicator lamp illuminates when adjustment key is pressed
Error messages:
• The indicator lamp does not illuminate when operated = Control unit defective
• The indicator lamp is permanently illuminated without being operated=
Control unit defective

ENB-301 Electric Home Care Bed
Operation
TEL: [phone]
No.50-5, Ln. 320, Sec. 1, Shatian Rd., Dadu Dist., Taichung
City, 432 Taiwan (R.O.C.)
FAX: [phone]
18.
8.3 Operating the brakes
Danger of crushing !
Before locking,turn the steering rollers to point towards the mattress support
under the nursing bed.
Central Medical Caster
(A) = Step on A to release steering.
(B) = Step on B to lock steering.
Brake medical casters
• When stepping on A, you
can lock the casters.
• Release A to provide
steering and movement

ENB-301 Electric Home Care Bed
Cleaning
TEL: [phone]
No.50-5, Ln. 320, Sec. 1, Shatian Rd., Dadu Dist., Taichung
City, 432 Taiwan (R.O.C.)
FAX: [phone]
19.
9.0 Cleaning
NOTE:
•When cleaning this bed, do not use any sharp-edged tools (knives, metal
scrapers) or aggressive solvents.
•Do not use high-pressure cleaners to clean this bed.
•Observe the instructions issued with the cleansing agent in order to avoid
damage to component surfaces.
•Use damp cloths to carry out cleaning work.
•Only use mild cleansers free of scouring agents for cleaning any metal,
wooden or plastic surfaces.

ENB-301 Electric Home Care Bed
Disposal
TEL: [phone]
No.50-5, Ln. 320, Sec. 1, Shatian Rd., Dadu Dist., Taichung
City, 432 Taiwan (R.O.C.)
FAX: [phone]
20.
10.0 Disposal
To comply with national law, the following instructions are guidelines for the
disposal of your product at the end of its life or when it ceases to function economically.
Recent legislation on electrical equipment indicates that the equipment must be
disposed of in a proper manner.
•The product and /or its components are not to enter the system of landfill sites.
•The product and /or its components are not to be disposed of in domestic household
waste.
•The electrical and material parts are to be disposed of as scrap or recycling
materials.
•Local waste collection depots are available to advise and dispose of electrical
products.
•Batteries which contain liquid acid must be stored and
disposed of separately at these depots.
•Please enquire about disposal depots with your local
authority.
•Should you require further advice, please contact your
supplier or nearest dealer.