Winners Only BFC2009 User manual

PROD.NO : BFC2009,BFG2009,BFP2009
DESCRIPTION
NO. Q' TY
A1pcs
Components List :
WINNERS ONLYR
ASSEMBLY INSTRUCTIONS
Mirror
Page 1 of 2 MADE IN VIETNAM
NO. Q' TY
1
3
2
8*19*2mm
Allen Key
4
8pcs
1pc
Hardware List
4*30*80mm
Allen Bolts 1/4"*38mm
8mm
Spring Washers
Flat Washers
8pcs
8pcs
DESCRIPTION SIZE SKETCH
B2pcs
Back Rail
Thank you for purchasing this quality product . Please read instructions thoroughly before unpacking assembly parts
Caution: Sharp, exposed staple tips can cause injury. Therefore, for your protection, please remove any exposed staples
used in packing.Please keep all hardware parts out of the reach of children.
1.We recommend that you should assemble this product with the assistance of another person; this will make assembly
easier and will help to prevent personal injury and to insure parts are not damaged during assembly process.
2. Before beginning, please check packing materials carefully for small parts that may have come loose inside the carton
during shipping. Do not discard any packing material until all parts have been located. If any parts are missing, please
contact your dealer for prompt replacement.
3. To prevent damage to your floor or carpet, please check the bottom of each piece of furniture for stain residues and
rough surface sand also check for staples or nails left after removing the packing materials .The manufacturer will not be
held responsible if preventive steps are not taken prior to installation.
4. Please do not over tighten screws or bolts. During normal use everyday, screws, bolts , nuts and wooden plugs may
loosen up.They should be periodically inspected and re-tightened to prevent damage to the furniture and (or) personal
property or cause injury.Always check to be sure all hardware on this list and below mentioned components are attached to
the furniture property and kept tightened.
5. Please lay all parts and hardware on a non-abrasive surface such as a carpet and follow the assembly.
TIP: Store the Allen Key and Wrench in assembly
in this product drawer or use masking or painter
tape to affix it to the underside of the
product. This will make it easier to find if you
want to periodically tighten bolts or disassemble
the product.

WINNERS ONLYR
ASSEMBLY INSTRUCTIONS
PROD.NO : BFC2009,BFG2009,BFP2009
Page 2 of 2 MADE IN VIETNAM
124
3
A
B
STEP 1: Attach the Support Bars (B) to the Mirror (A) and the Dresser using provided hardware
as shown in FIG.1
FIG.1
Assembly is now completed.