Target Windham Desk WNDESKXXBK User manual

windham
desk
assembly instructions
style # WNDESKXXBK (black)
dpci # 249-14-0519
tcin # 14372254
style # WNDESKXXGY (gray)
dpci # 249-14-0520
tcin # 14372251
style # WNDESKXXRD (red)
dpci # 249-14-0515
tcin # 14373266
style # WNDESKXXBL (teal)
dpci # 249-14-0516
tcin # 14373264
style # WNDESKXXWH (shell)
dpci # 249-14-0517
tcin # 14373233
style # WNDESKXXOV (overcast)
dpci # 249-14-2757
tcin # 50541816
© 2019 Target. The Bullseye Design is a trademark of Target Brands, Inc. All rights reserved.
>>

Congratulations on your latest Target purchase.
Now what? Don’t start sweating over this box of parts. This will be easy. We did the hard work for you.
All you need to do is follow our simple instructions and you’ll be on your way to transforming your
room in no time. Good luck—though we’re condent you won’t need it.
before you begin
1. Check for damaged or missing parts. Call 1-855-MYTGTHOME (855-698-4846) to order missing supplies.
2. Use the carton as a working surface to prevent product damage during assembly.
3. Read through and review assembly steps.
4. Gather all tools prior to assembly.
tools needed
2

3
table of contents
introduction 2
hardware 4
parts list 5
how to use the cam lock system 6
assembly 7-13
QUESTIONS? Just call 1-855-MYTGTHOME (855-698-4846) for parts and service. For faster service, have the style number and dpci number ready when calling.

4
hardware
(H1) x 20
wooden dowel
(H2) x 16
cam bolt
(H3) x 16
cam
(H4) x 8
long at-head screw
(H5) x 2
knob
(H6) x 2
knob bolt
(H7) x 2
small cam
(H8) x 2
long pan-head screw
(H9) x 2
small cam bolt
(H10) x 1
15mm pan-head screw
(H11) x 1
wall strap
(H12) x 1
wall anchor
(H13) x 1
38mm wall screw
(H14) x 2
washer

exploded diagram
ITEM DESCRIPTION QUANTITY
1 top panel 1
2 left side assembly 1
3 right side assembly 1
4 bottom frame 1
5 back panel 1
6 bottom back stretcher 1
7 drawer face side 1
8 drawer left side 1
9 drawer right side 1
10 drawer back side 1
11 drawer bottom panel 1
12 drawer bottom support 1
5

how to use the cam lock system
1.
Screw cam bolt into panel
2.
Align cam bolt(s) with cam(s)
and insert all the way into
cross-bored hole(s)
3.
Push cam into panel - arrow feature
on cam top points to panel edge
4.
Rotate cam(s) clockwise 180° to
lock panels together
5.
Panels should be tight against each
other and connection should be rigid
6
4. 5.
1. 2. 3.

step 1: attach bottom frame to back panel
(H1) x 2
wooden dowel
(H2) x 2
cam bolt
(H3) x 2
cam
1.1. Carefully tap small wooden dowels into place. Leave 1/2” of the dowels sticking out.
1.2. Screw-In cam bolts must be screwed down ush.
1.3. Refer to page 6 for instructions on how to use the cam lock system.
7

8
step 2: attach right side assembly and bottom back stretcher
(H1) x 4
wooden dowel
(H2) x 4
cam bolt
(H3) x 4
cam
(H8) x 1
long pan-head
screw
2.1. Carefully tap small wooden dowels into place. Leave 1/2” of the dowels sticking out.
2.2. Screw-In cam bolts must be screwed down ush.
2.3. Refer to page 6 for instructions on how to use the cam lock system.
2.4. Do not over tighten screws.

9
step 3: attach left side assembly
(H1) x 4
wooden dowel
(H2) x 4
cam bolt
(H3) x 4
cam
(H8) x 1
long pan-head
screw
3.1. Carefully tap small wooden dowels into place. Leave 1/2” of the dowels sticking out.
3.2. Screw-In cam bolts must be screwed down ush.
3.3. Refer to page 6 for instructions on how to use the cam lock system.
3.4. Do not over tighten screws.

10
step 4: attach top panel
(H1) x 6
wooden dowel
(H2) x 6
cam bolt
(H3) x 6
cam
4.1. Carefully tap small wooden dowels into place. Leave 1/2” of the dowels sticking out.
4.2. Screw-In cam bolts must be screwed down ush.
4.3. Refer to page 6 for instructions on how to use the cam lock system.
Carefully tap small wooden dowels into place. Leave 1/2” of the dowels sticking out.