Lifestyle Solutions 500 Series User manual

Box # 1 Box # 2
Optional Slats
13 pcs. Slats
2 pcs. Bed Side Rails
1 pc. Slat Support
4 pcs. Support Leg
1 pc. Head Board
1 pc. Foot Board
Parts And Fittings Packing Detail
Slat Hardware
32mm Screw - 26pcs.
(Packed in the slats box)
Dominique Bed
Bed Assembly Instructions
Page 1 of 2
A complete assembled view of
a Conventional Bed
4mm Allen Key 1 pc.
Bolts M6 x 70mm - 4pcs.
Washer - 8 pcs.
Hardware Pack In Box #1
5mm Allen Key 1 pc.
Bolt
M8 x 20mm - 8 pcs

Bed Assembly Instructions
Page 2 of 2
Dominique Bed
Foot board
Slat support
Slat
Head board
Side Rail
4nos M6 x 70mm bolt
fastened to 4nos
pre-drilled slats
Foot Board
Step 1/Diagram 1
Step 3/Diagram 3
Step 2/Diagram 2
Finally, place both ends of the
assembled slats in the bed frame resting on
both sides of the side rails and screw them
inplace with the 32mm screws provided as
shown in diagram 3.
Fix both side rails to the Head Board and Foot Board as shown in
diagram 1 with the 20mm bolts and washers.
Spread out all the slats on to the slat support.
Further secure the pre-drilled slats to the
slats support and support legs with 4nos
M6 x 70mm bolt as shown in diagram 2.
Diagram 1
Diagram 2
Center Slat
Support
Leg Support
Leveler
Pre-drilled
Slat
M4 Allen
key
Washer
Metal Bracket
Threaded Hole
Side Rail
M8 x 20mm
Bolt
5mm Allen Key
Head & Foot Board Leg
M6x70mm
Bolts
Model shown for assembly instructions only
Diagram 3
Screw
Fasten screws to all slats
on side rail

The Fusion of Function and Comfort with Style
LIFESTYLE SOLUTIONS
Positano / 500 Series Casegood
Assembly of Knobs. Step #1
Remove Drawer Knobs as shown
Step #2
Assemble knobs on the outside as shown.
To replace Wood knobs with the Metal knobs, remove the Wood knobs and
assemble the Metal knobs with the bolts provided along with the Metal knobs.
Bolt
Drawer Knobs

500S Series 6 Drawer Dresser
Removing of Center Leg
The center Leg is added for additional support. It is an optional extra.
You may remove it if you wish, The following steps will assist you in
doing this
First, turn the Dresser upside down as shown on a clean smooth
surface to avoide any scratches
STEP 1
6 Drawer Dresser
STEP 2
Plastic Wrapper Remove the center support leg from the cleat as shown.
*For Illustration purposes only
Center Leg
slide
direction
slide
direction
The Fusion Of Function And Comfort With Style
LIFESTYLE SOLUTIONS

500 SERIES/MONTEGO MIRROR FRAME
Please remove the hooks that are attached on the mirror if you want
to change the hanging position from potrait to landscape.To change
hook position, use predrilled holes as shown below.
Use Philips screw driver to remove hook
and reattach accordingly.
Hook
Predrill Hole
Fig. 1 : Potrait Position
Fig. 2 : Landscape Position
The Fusion Of Function And Comfort With Style
LIFESTYLE SOLUTIONS
*Not Included

500 Series TV Armoire Step 1
Remove door knobs as shown
Knob
Bolt
Fixing of Door Knobs and converting
the armoire into a wardrobe.
Page 1
Pull string
to open the door
Step 2
Refix knobs on the outside as shown
Fixing Tool
Additional part
1 pc - Wooden Rod Phillips Screwdriver
The Fusion Of Function And Comfort With Style
LIFESTYLE SOLUTIONS

Optional Step
Step 3 : Tilt down the Armoire and unscrew
all 8 wood screw to removed the TV Shelf
If you want to convert your TV Armoire
into a Wardrobe, please follow instructions below.
Step 4 : Lift the TV Armoire up right
and remove the TV Shelf and place the Wooden
Rod into the bracket attached to the Side panel.
Wood screw
Screw Driver
Bracket
Wooden Rod
Side Panel
Page 2
The Fusion Of Function And Comfort With Style
LIFESTYLE SOLUTIONS

Optional Step
If you want to convert your TV Armoire
to a wardrobe, please place the wooden
rod into the bracket attached to the Side Panel.
Page 2
Screw driver
Hinge
Screw
The Fusion Of Function And Comfort With Style
LIFESTYLE SOLUTIONS
Wooden rod bracket
Wooden rod clothing hanger
Due to 'settling' and 'transportation',
there is a chance that you may have to
adjust the doors of the armoire.
You may loosen the screws on the
door hinges (as shown) and adjust
the doorsand retighten the screws.
Please note that this adjustment may
not be required.
You may also loosen the screws for
the Push Open Magnets and Roller
Catches if the two doors does not
align and close pproperly.

Step 5 : Now you have a wardrobe with a cloth hanger.
The Fusion Of Function And Comfort With Style
LIFESTYLE SOLUTIONS Page 3