Whittier Wood 2078AFGAC User manual

P.O. Box 2827
Eugene, OR 97402 USA
Production Code:
VN 01/13
Model #
2078AFGAC;
2078AFCAF
McKenzie Media
Tower (2Pk)
AFGAC = Glazed Antique Cherry finish
AFCAF = Caffè finish
Assembly Instructions
Congratulations!
This fine piece of furniture will make a gorgeous addition to
your home. For the best results, read the Assembly
Instructions before you begin your project.
IMPORTANT NOTES:
For normal household use only. Not recommended for
commercial use.
Do not overload the shelves.
Unload items before you move this unit.
Before you load or move this unit, tighten all screws and
supports.
Before you begin your project, completely read the
Assembly Instructions.
Store this item: 1- in its box; 2- in a dry place; 3- in
temperatures that range from 40°F to 90°F (not on a cold
and possibly damp cement floor).
Periodically inspect your furniture for any loose glue
joints, screws or any other problem that might affect the
stability of your furniture. Tighten or repair as needed.
WARNING
Serious or fatal crushing injuries can occur from
furniture tip-over. To help prevent tip-over:
Place heaviest items in the bottom drawers.
Unless specifically designed to accommodate, do not
set TVs or other heavy objects on top of this product.
Never allow children to climb or hang on drawers, doors
or shelves.
Never open more than one drawer at a time.
Use of tip-over restraints may only reduce but not
eliminate the risk of tip-over.
DESIGN SUBJECT TO CHANGE WITHOUT NOTICE.
CALL US FIRST! Do not return this item to the store
Service Policy: We will replace any part that is defective,
missing or damaged during assembly. For a replacement
part, directly contact Whittier Wood Products customer
service department by phone, fax, mail or email.
Hours: Our friendly customer service staff can be reached
Monday-Friday 7:00 a.m. to 5:00 p.m. (Pacific Time). You
may leave a message 24 hours a day, seven days a week.
To Order: Provide the finish and furniture model number
(upper portion of this page), the part letter, production
code, quantity needed, reason for replacement and your
full name, address and telephone number.
Parts ship from our Eugene, Oregon factory within one or
two business days from the time we receive your request.
Please allow five to ten business days for delivery.
800-653-3336 •Outside the U.S. or Canada: 541-687-0213 • Fax: [phone]
www.whittierwood.com • P.O. Box 2827 • Eugene, Oregon 97402, U.S.A.

2078AFGAC; 2078AFCAF McKenzie Media Tower (2Pk)
Parts List
2078AFGAC_2078AFCAF —Page 2 —01/13
Please identify the parts and check that quantities received match those on this list.
If you need to replace a part, refer to the following letter and part name.
Part
Description
Quantity
A
Top Assembly (attached)
2
B
Case Assembly
2
C
Top Adjustable Shelf
2
D
Bottom Adjustable Shelf
2
E
Door (installed)
2
F
Knob (attached)
2
G
#8 x 1-1/2" Machine Screw (installed)
2
H
Shelf Bracket (installed)
16
I
#6 x 1/2" Undercut Screw (inserted)
16
J
Insert Nut (inserted)
8
K
Small Adjustable Glide (installed)
8
L
Magnetic Lock & Plate (attached)
2 sets
M
Hinge (attached)
4
N
#6 x 5/8" Flat Head Screw (inserted)
24 (AFGAC)
0 (AFCAF)
O
#6 x 5/8" Undercut Screw (inserted)
4 (AFGAC)
28 (AFCAF)
P
#6 x 5/8" Philtruss Screw (inserted)
4
Q
#8 x 1-1/4" Pan Head Screw (inserted)
16
TR
Furniture Tipping Restraint
2 sets

2078AFGAC; 2078AFCAF McKenzie Media Tower (2Pk)
Assembly Instructions
2078AFGAC_2078AFCAF —Page 3 —01/13
Tool Required: Phillips Screwdriver
1. To move the Adjustable Shelves (C, D), remove the #6 x 1/2" Undercut Screws (I) and the Shelf
(C, D). Insert the Shelf Brackets (H) into the desired hole and place the shelf on top of the
brackets and insert the screws. See Figures 1 and 1a.
2. Place the tower at its final destination. Rotate the Adjustable Glides (K) found at the corners of
the unit until the unit is level. See Figure 1.
Fig. 1
Fig. 1a
I
H
Door removed for illustration purposes.
K
C
D
K

2078AFGAC; 2078AFCAF McKenzie Media Tower (2Pk)
Assembly Instructions
2078AFGAC_2078AFCAF —Page 4 —01/13
3. Tipping restraint: Locate the stud in the wall behind the unit. Attach a Clip (T1) to one wall stud
with two #8 x 2" Black Screws (T3). See Figure 3a. Attach a second clip to one of the back legs
of the unit with two #8 x 1" Pan Head Screws (T4). See Figure 3b. Connect the two clips with
the Nylon Restraint Strap (T2). Pull the Nylon Restraint Strap (T2) tight so there is no slack. See
Figures 3c and 3d. Repeat for the other tower. If you cannot locate two studs, purchase the
proper wall attachment hardware for your type of wall and secure the unit.
Fig. 3a
T1
T3
Pull tight
Fig. 3d
T1
T2
T3
T4
Fig. 3c
Pull the Nylon Restraint
Strap (T2) tight
so there is no slack.
T4
T1
Fig. 3b
Attach 2nd clip to one
of the Back Legs of
the Towers