ENOZE 8600E User manual

ITEM NO.:8600E
RC 4WD CAR
1/22
shock

The battery isn't fully charged when you first get it. When the car battery low, the car will start the
LVC（Low Voltage Cutoff）protection function to protect the battery, the car can only turn, not
forward and backward. Please charge the battery.
1. Plug the USB charging cable into the USB charging port of the computer, power bank or USB
adapter (5V@ 0.5~2.0A).
2. Connect the battery wire to the USB charging cable.
3. Charging time: about 210 minutes.
4. The red indicator light on the USB charging cable will turn soild when it is charging and will turn off
once fully charged.

If the remote will not be used for a long time, make sure to turn it off and remove the batteries.
When the battery of the remote control is low, the indicator light of the remote control will flash
slowly.
Remote Battery:
①Push the battery cover out.
②Insert 2 AA batteries ( not included ) in the correct direction.
③Push the battery cover in.
Pairing :