•Adapter - CWC6
Input Voltage: 100~240VAC 50Hz/60Hz
Output Voltage: 12VDC 1000mA
Weight: 120g (approx)
Adapter Type
EA - 2Pin (Australia)
ED - 2Pin (Europe)
EE - 3Pin (UK)
ES - 2Pin (US)
•CSAHT
Input Voltage: 12VDC 1000mA
Output Voltage: 8.7VDC 900mA
Charge Time: 170mins
Dimensions: 95(H)mm x 84(W)mm x 77(D)mm
Weight: 160g (approx)
In the event that your CSAHT gets wet, do not
switch on. Consult your dealer immediately.
Community Design Registration Pending
U.S Design Patent Pending
Unregistered Design Right Entel UK 2003
All Rights Reserved
BULK-HEAD MOUNTING
For your convenience the CSAHT can be
bulkhead mounted on either it’s base or rear.
**NOTE Only use the supplied screws.
●The CSAHT is designed exclusively for use
with battery packs related to the Entel HT series.
Do not use it to charge any other types of
battery pack.
●Do not use CSAHT with any adapter other than
CWC6.
●The Entel adapter is designed for use with
an AC power supply voltage between 100V
and 240V. Do not connect it to a power source
outside this range.
●Never charge the transceiver whilst
it is switched on.
●Unplug the adapter when it is not in use.
●Do not dismantle the CSAHT or the CWC6 adapter.
●Never insert any metal or any other conductive
objects into the charger.
●Do not touch the charger’s terminals.
●Never short the charge contacts with metal
or any other conductive object.
●The CSAHT should be placed in a well
ventilated, dry area.